/* npp3.c */ /*********************************************************************** * This code is part of GLPK (GNU Linear Programming Kit). * * Copyright (C) 2009-2017 Andrew Makhorin, Department for Applied * Informatics, Moscow Aviation Institute, Moscow, Russia. All rights * reserved. E-mail: . * * GLPK is free software: you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * GLPK is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public * License for more details. * * You should have received a copy of the GNU General Public License * along with GLPK. If not, see . ***********************************************************************/ #include "env.h" #include "npp.h" /*********************************************************************** * NAME * * npp_empty_row - process empty row * * SYNOPSIS * * #include "glpnpp.h" * int npp_empty_row(NPP *npp, NPPROW *p); * * DESCRIPTION * * The routine npp_empty_row processes row p, which is empty, i.e. * coefficients at all columns in this row are zero: * * L[p] <= sum 0 x[j] <= U[p], (1) * * where L[p] <= U[p]. * * RETURNS * * 0 - success; * * 1 - problem has no primal feasible solution. * * PROBLEM TRANSFORMATION * * If the following conditions hold: * * L[p] <= +eps, U[p] >= -eps, (2) * * where eps is an absolute tolerance for row value, the row p is * redundant. In this case it can be replaced by equivalent redundant * row, which is free (unbounded), and then removed from the problem. * Otherwise, the row p is infeasible and, thus, the problem has no * primal feasible solution. * * RECOVERING BASIC SOLUTION * * See the routine npp_free_row. * * RECOVERING INTERIOR-POINT SOLUTION * * See the routine npp_free_row. * * RECOVERING MIP SOLUTION * * None needed. */ int npp_empty_row(NPP *npp, NPPROW *p) { /* process empty row */ double eps = 1e-3; /* the row must be empty */ xassert(p->ptr == NULL); /* check primal feasibility */ if (p->lb > +eps || p->ub < -eps) return 1; /* replace the row by equivalent free (unbounded) row */ p->lb = -DBL_MAX, p->ub = +DBL_MAX; /* and process it */ npp_free_row(npp, p); return 0; } /*********************************************************************** * NAME * * npp_empty_col - process empty column * * SYNOPSIS * * #include "glpnpp.h" * int npp_empty_col(NPP *npp, NPPCOL *q); * * DESCRIPTION * * The routine npp_empty_col processes column q: * * l[q] <= x[q] <= u[q], (1) * * where l[q] <= u[q], which is empty, i.e. has zero coefficients in * all constraint rows. * * RETURNS * * 0 - success; * * 1 - problem has no dual feasible solution. * * PROBLEM TRANSFORMATION * * The row of the dual system corresponding to the empty column is the * following: * * sum 0 pi[i] + lambda[q] = c[q], (2) * i * * from which it follows that: * * lambda[q] = c[q]. (3) * * If the following condition holds: * * c[q] < - eps, (4) * * where eps is an absolute tolerance for column multiplier, the lower * column bound l[q] must be active to provide dual feasibility (note * that being preprocessed the problem is always minimization). In this * case the column can be fixed on its lower bound and removed from the * problem (if the column is integral, its bounds are also assumed to * be integral). And if the column has no lower bound (l[q] = -oo), the * problem has no dual feasible solution. * * If the following condition holds: * * c[q] > + eps, (5) * * the upper column bound u[q] must be active to provide dual * feasibility. In this case the column can be fixed on its upper bound * and removed from the problem. And if the column has no upper bound * (u[q] = +oo), the problem has no dual feasible solution. * * Finally, if the following condition holds: * * - eps <= c[q] <= +eps, (6) * * dual feasibility does not depend on a particular value of column q. * In this case the column can be fixed either on its lower bound (if * l[q] > -oo) or on its upper bound (if u[q] < +oo) or at zero (if the * column is unbounded) and then removed from the problem. * * RECOVERING BASIC SOLUTION * * See the routine npp_fixed_col. Having been recovered the column * is assigned status GLP_NS. However, if actually it is not fixed * (l[q] < u[q]), its status should be changed to GLP_NL, GLP_NU, or * GLP_NF depending on which bound it was fixed on transformation stage. * * RECOVERING INTERIOR-POINT SOLUTION * * See the routine npp_fixed_col. * * RECOVERING MIP SOLUTION * * See the routine npp_fixed_col. */ struct empty_col { /* empty column */ int q; /* column reference number */ char stat; /* status in basic solution */ }; static int rcv_empty_col(NPP *npp, void *info); int npp_empty_col(NPP *npp, NPPCOL *q) { /* process empty column */ struct empty_col *info; double eps = 1e-3; /* the column must be empty */ xassert(q->ptr == NULL); /* check dual feasibility */ if (q->coef > +eps && q->lb == -DBL_MAX) return 1; if (q->coef < -eps && q->ub == +DBL_MAX) return 1; /* create transformation stack entry */ info = npp_push_tse(npp, rcv_empty_col, sizeof(struct empty_col)); info->q = q->j; /* fix the column */ if (q->lb == -DBL_MAX && q->ub == +DBL_MAX) { /* free column */ info->stat = GLP_NF; q->lb = q->ub = 0.0; } else if (q->ub == +DBL_MAX) lo: { /* column with lower bound */ info->stat = GLP_NL; q->ub = q->lb; } else if (q->lb == -DBL_MAX) up: { /* column with upper bound */ info->stat = GLP_NU; q->lb = q->ub; } else if (q->lb != q->ub) { /* double-bounded column */ if (q->coef >= +DBL_EPSILON) goto lo; if (q->coef <= -DBL_EPSILON) goto up; if (fabs(q->lb) <= fabs(q->ub)) goto lo; else goto up; } else { /* fixed column */ info->stat = GLP_NS; } /* process fixed column */ npp_fixed_col(npp, q); return 0; } static int rcv_empty_col(NPP *npp, void *_info) { /* recover empty column */ struct empty_col *info = _info; if (npp->sol == GLP_SOL) npp->c_stat[info->q] = info->stat; return 0; } /*********************************************************************** * NAME * * npp_implied_value - process implied column value * * SYNOPSIS * * #include "glpnpp.h" * int npp_implied_value(NPP *npp, NPPCOL *q, double s); * * DESCRIPTION * * For column q: * * l[q] <= x[q] <= u[q], (1) * * where l[q] < u[q], the routine npp_implied_value processes its * implied value s[q]. If this implied value satisfies to the current * column bounds and integrality condition, the routine fixes column q * at the given point. Note that the column is kept in the problem in * any case. * * RETURNS * * 0 - column has been fixed; * * 1 - implied value violates to current column bounds; * * 2 - implied value violates integrality condition. * * ALGORITHM * * Implied column value s[q] satisfies to the current column bounds if * the following condition holds: * * l[q] - eps <= s[q] <= u[q] + eps, (2) * * where eps is an absolute tolerance for column value. If the column * is integral, the following condition also must hold: * * |s[q] - floor(s[q]+0.5)| <= eps, (3) * * where floor(s[q]+0.5) is the nearest integer to s[q]. * * If both condition (2) and (3) are satisfied, the column can be fixed * at the value s[q], or, if it is integral, at floor(s[q]+0.5). * Otherwise, if s[q] violates (2) or (3), the problem has no feasible * solution. * * Note: If s[q] is close to l[q] or u[q], it seems to be reasonable to * fix the column at its lower or upper bound, resp. rather than at the * implied value. */ int npp_implied_value(NPP *npp, NPPCOL *q, double s) { /* process implied column value */ double eps, nint; xassert(npp == npp); /* column must not be fixed */ xassert(q->lb < q->ub); /* check integrality */ if (q->is_int) { nint = floor(s + 0.5); if (fabs(s - nint) <= 1e-5) s = nint; else return 2; } /* check current column lower bound */ if (q->lb != -DBL_MAX) { eps = (q->is_int ? 1e-5 : 1e-5 + 1e-8 * fabs(q->lb)); if (s < q->lb - eps) return 1; /* if s[q] is close to l[q], fix column at its lower bound rather than at the implied value */ if (s < q->lb + 1e-3 * eps) { q->ub = q->lb; return 0; } } /* check current column upper bound */ if (q->ub != +DBL_MAX) { eps = (q->is_int ? 1e-5 : 1e-5 + 1e-8 * fabs(q->ub)); if (s > q->ub + eps) return 1; /* if s[q] is close to u[q], fix column at its upper bound rather than at the implied value */ if (s > q->ub - 1e-3 * eps) { q->lb = q->ub; return 0; } } /* fix column at the implied value */ q->lb = q->ub = s; return 0; } /*********************************************************************** * NAME * * npp_eq_singlet - process row singleton (equality constraint) * * SYNOPSIS * * #include "glpnpp.h" * int npp_eq_singlet(NPP *npp, NPPROW *p); * * DESCRIPTION * * The routine npp_eq_singlet processes row p, which is equiality * constraint having the only non-zero coefficient: * * a[p,q] x[q] = b. (1) * * RETURNS * * 0 - success; * * 1 - problem has no primal feasible solution; * * 2 - problem has no integer feasible solution. * * PROBLEM TRANSFORMATION * * The equality constraint defines implied value of column q: * * x[q] = s[q] = b / a[p,q]. (2) * * If the implied value s[q] satisfies to the column bounds (see the * routine npp_implied_value), the column can be fixed at s[q] and * removed from the problem. In this case row p becomes redundant, so * it can be replaced by equivalent free row and also removed from the * problem. * * Note that the routine removes from the problem only row p. Column q * becomes fixed, however, it is kept in the problem. * * RECOVERING BASIC SOLUTION * * In solution to the original problem row p is assigned status GLP_NS * (active equality constraint), and column q is assigned status GLP_BS * (basic column). * * Multiplier for row p can be computed as follows. In the dual system * of the original problem column q corresponds to the following row: * * sum a[i,q] pi[i] + lambda[q] = c[q] ==> * i * * sum a[i,q] pi[i] + a[p,q] pi[p] + lambda[q] = c[q]. * i!=p * * Therefore: * * 1 * pi[p] = ------ (c[q] - lambda[q] - sum a[i,q] pi[i]), (3) * a[p,q] i!=q * * where lambda[q] = 0 (since column[q] is basic), and pi[i] for all * i != p are known in solution to the transformed problem. * * Value of column q in solution to the original problem is assigned * its implied value s[q]. * * RECOVERING INTERIOR-POINT SOLUTION * * Multiplier for row p is computed with formula (3). Value of column * q is assigned its implied value s[q]. * * RECOVERING MIP SOLUTION * * Value of column q is assigned its implied value s[q]. */ struct eq_singlet { /* row singleton (equality constraint) */ int p; /* row reference number */ int q; /* column reference number */ double apq; /* constraint coefficient a[p,q] */ double c; /* objective coefficient at x[q] */ NPPLFE *ptr; /* list of non-zero coefficients a[i,q], i != p */ }; static int rcv_eq_singlet(NPP *npp, void *info); int npp_eq_singlet(NPP *npp, NPPROW *p) { /* process row singleton (equality constraint) */ struct eq_singlet *info; NPPCOL *q; NPPAIJ *aij; NPPLFE *lfe; int ret; double s; /* the row must be singleton equality constraint */ xassert(p->lb == p->ub); xassert(p->ptr != NULL && p->ptr->r_next == NULL); /* compute and process implied column value */ aij = p->ptr; q = aij->col; s = p->lb / aij->val; ret = npp_implied_value(npp, q, s); xassert(0 <= ret && ret <= 2); if (ret != 0) return ret; /* create transformation stack entry */ info = npp_push_tse(npp, rcv_eq_singlet, sizeof(struct eq_singlet)); info->p = p->i; info->q = q->j; info->apq = aij->val; info->c = q->coef; info->ptr = NULL; /* save column coefficients a[i,q], i != p (not needed for MIP solution) */ if (npp->sol != GLP_MIP) { for (aij = q->ptr; aij != NULL; aij = aij->c_next) { if (aij->row == p) continue; /* skip a[p,q] */ lfe = dmp_get_atom(npp->stack, sizeof(NPPLFE)); lfe->ref = aij->row->i; lfe->val = aij->val; lfe->next = info->ptr; info->ptr = lfe; } } /* remove the row from the problem */ npp_del_row(npp, p); return 0; } static int rcv_eq_singlet(NPP *npp, void *_info) { /* recover row singleton (equality constraint) */ struct eq_singlet *info = _info; NPPLFE *lfe; double temp; if (npp->sol == GLP_SOL) { /* column q must be already recovered as GLP_NS */ if (npp->c_stat[info->q] != GLP_NS) { npp_error(); return 1; } npp->r_stat[info->p] = GLP_NS; npp->c_stat[info->q] = GLP_BS; } if (npp->sol != GLP_MIP) { /* compute multiplier for row p with formula (3) */ temp = info->c; for (lfe = info->ptr; lfe != NULL; lfe = lfe->next) temp -= lfe->val * npp->r_pi[lfe->ref]; npp->r_pi[info->p] = temp / info->apq; } return 0; } /*********************************************************************** * NAME * * npp_implied_lower - process implied column lower bound * * SYNOPSIS * * #include "glpnpp.h" * int npp_implied_lower(NPP *npp, NPPCOL *q, double l); * * DESCRIPTION * * For column q: * * l[q] <= x[q] <= u[q], (1) * * where l[q] < u[q], the routine npp_implied_lower processes its * implied lower bound l'[q]. As the result the current column lower * bound may increase. Note that the column is kept in the problem in * any case. * * RETURNS * * 0 - current column lower bound has not changed; * * 1 - current column lower bound has changed, but not significantly; * * 2 - current column lower bound has significantly changed; * * 3 - column has been fixed on its upper bound; * * 4 - implied lower bound violates current column upper bound. * * ALGORITHM * * If column q is integral, before processing its implied lower bound * should be rounded up: * * ( floor(l'[q]+0.5), if |l'[q] - floor(l'[q]+0.5)| <= eps * l'[q] := < (2) * ( ceil(l'[q]), otherwise * * where floor(l'[q]+0.5) is the nearest integer to l'[q], ceil(l'[q]) * is smallest integer not less than l'[q], and eps is an absolute * tolerance for column value. * * Processing implied column lower bound l'[q] includes the following * cases: * * 1) if l'[q] < l[q] + eps, implied lower bound is redundant; * * 2) if l[q] + eps <= l[q] <= u[q] + eps, current column lower bound * l[q] can be strengthened by replacing it with l'[q]. If in this * case new column lower bound becomes close to current column upper * bound u[q], the column can be fixed on its upper bound; * * 3) if l'[q] > u[q] + eps, implied lower bound violates current * column upper bound u[q], in which case the problem has no primal * feasible solution. */ int npp_implied_lower(NPP *npp, NPPCOL *q, double l) { /* process implied column lower bound */ int ret; double eps, nint; xassert(npp == npp); /* column must not be fixed */ xassert(q->lb < q->ub); /* implied lower bound must be finite */ xassert(l != -DBL_MAX); /* if column is integral, round up l'[q] */ if (q->is_int) { nint = floor(l + 0.5); if (fabs(l - nint) <= 1e-5) l = nint; else l = ceil(l); } /* check current column lower bound */ if (q->lb != -DBL_MAX) { eps = (q->is_int ? 1e-3 : 1e-3 + 1e-6 * fabs(q->lb)); if (l < q->lb + eps) { ret = 0; /* redundant */ goto done; } } /* check current column upper bound */ if (q->ub != +DBL_MAX) { eps = (q->is_int ? 1e-5 : 1e-5 + 1e-8 * fabs(q->ub)); if (l > q->ub + eps) { ret = 4; /* infeasible */ goto done; } /* if l'[q] is close to u[q], fix column at its upper bound */ if (l > q->ub - 1e-3 * eps) { q->lb = q->ub; ret = 3; /* fixed */ goto done; } } /* check if column lower bound changes significantly */ if (q->lb == -DBL_MAX) ret = 2; /* significantly */ else if (q->is_int && l > q->lb + 0.5) ret = 2; /* significantly */ else if (l > q->lb + 0.30 * (1.0 + fabs(q->lb))) ret = 2; /* significantly */ else ret = 1; /* not significantly */ /* set new column lower bound */ q->lb = l; done: return ret; } /*********************************************************************** * NAME * * npp_implied_upper - process implied column upper bound * * SYNOPSIS * * #include "glpnpp.h" * int npp_implied_upper(NPP *npp, NPPCOL *q, double u); * * DESCRIPTION * * For column q: * * l[q] <= x[q] <= u[q], (1) * * where l[q] < u[q], the routine npp_implied_upper processes its * implied upper bound u'[q]. As the result the current column upper * bound may decrease. Note that the column is kept in the problem in * any case. * * RETURNS * * 0 - current column upper bound has not changed; * * 1 - current column upper bound has changed, but not significantly; * * 2 - current column upper bound has significantly changed; * * 3 - column has been fixed on its lower bound; * * 4 - implied upper bound violates current column lower bound. * * ALGORITHM * * If column q is integral, before processing its implied upper bound * should be rounded down: * * ( floor(u'[q]+0.5), if |u'[q] - floor(l'[q]+0.5)| <= eps * u'[q] := < (2) * ( floor(l'[q]), otherwise * * where floor(u'[q]+0.5) is the nearest integer to u'[q], * floor(u'[q]) is largest integer not greater than u'[q], and eps is * an absolute tolerance for column value. * * Processing implied column upper bound u'[q] includes the following * cases: * * 1) if u'[q] > u[q] - eps, implied upper bound is redundant; * * 2) if l[q] - eps <= u[q] <= u[q] - eps, current column upper bound * u[q] can be strengthened by replacing it with u'[q]. If in this * case new column upper bound becomes close to current column lower * bound, the column can be fixed on its lower bound; * * 3) if u'[q] < l[q] - eps, implied upper bound violates current * column lower bound l[q], in which case the problem has no primal * feasible solution. */ int npp_implied_upper(NPP *npp, NPPCOL *q, double u) { int ret; double eps, nint; xassert(npp == npp); /* column must not be fixed */ xassert(q->lb < q->ub); /* implied upper bound must be finite */ xassert(u != +DBL_MAX); /* if column is integral, round down u'[q] */ if (q->is_int) { nint = floor(u + 0.5); if (fabs(u - nint) <= 1e-5) u = nint; else u = floor(u); } /* check current column upper bound */ if (q->ub != +DBL_MAX) { eps = (q->is_int ? 1e-3 : 1e-3 + 1e-6 * fabs(q->ub)); if (u > q->ub - eps) { ret = 0; /* redundant */ goto done; } } /* check current column lower bound */ if (q->lb != -DBL_MAX) { eps = (q->is_int ? 1e-5 : 1e-5 + 1e-8 * fabs(q->lb)); if (u < q->lb - eps) { ret = 4; /* infeasible */ goto done; } /* if u'[q] is close to l[q], fix column at its lower bound */ if (u < q->lb + 1e-3 * eps) { q->ub = q->lb; ret = 3; /* fixed */ goto done; } } /* check if column upper bound changes significantly */ if (q->ub == +DBL_MAX) ret = 2; /* significantly */ else if (q->is_int && u < q->ub - 0.5) ret = 2; /* significantly */ else if (u < q->ub - 0.30 * (1.0 + fabs(q->ub))) ret = 2; /* significantly */ else ret = 1; /* not significantly */ /* set new column upper bound */ q->ub = u; done: return ret; } /*********************************************************************** * NAME * * npp_ineq_singlet - process row singleton (inequality constraint) * * SYNOPSIS * * #include "glpnpp.h" * int npp_ineq_singlet(NPP *npp, NPPROW *p); * * DESCRIPTION * * The routine npp_ineq_singlet processes row p, which is inequality * constraint having the only non-zero coefficient: * * L[p] <= a[p,q] * x[q] <= U[p], (1) * * where L[p] < U[p], L[p] > -oo and/or U[p] < +oo. * * RETURNS * * 0 - current column bounds have not changed; * * 1 - current column bounds have changed, but not significantly; * * 2 - current column bounds have significantly changed; * * 3 - column has been fixed on its lower or upper bound; * * 4 - problem has no primal feasible solution. * * PROBLEM TRANSFORMATION * * Inequality constraint (1) defines implied bounds of column q: * * ( L[p] / a[p,q], if a[p,q] > 0 * l'[q] = < (2) * ( U[p] / a[p,q], if a[p,q] < 0 * * ( U[p] / a[p,q], if a[p,q] > 0 * u'[q] = < (3) * ( L[p] / a[p,q], if a[p,q] < 0 * * If these implied bounds do not violate current bounds of column q: * * l[q] <= x[q] <= u[q], (4) * * they can be used to strengthen the current column bounds: * * l[q] := max(l[q], l'[q]), (5) * * u[q] := min(u[q], u'[q]). (6) * * (See the routines npp_implied_lower and npp_implied_upper.) * * Once bounds of row p (1) have been carried over column q, the row * becomes redundant, so it can be replaced by equivalent free row and * removed from the problem. * * Note that the routine removes from the problem only row p. Column q, * even it has been fixed, is kept in the problem. * * RECOVERING BASIC SOLUTION * * Note that the row in the dual system corresponding to column q is * the following: * * sum a[i,q] pi[i] + lambda[q] = c[q] ==> * i * (7) * sum a[i,q] pi[i] + a[p,q] pi[p] + lambda[q] = c[q], * i!=p * * where pi[i] for all i != p are known in solution to the transformed * problem. Row p does not exist in the transformed problem, so it has * zero multiplier there. This allows computing multiplier for column q * in solution to the transformed problem: * * lambda~[q] = c[q] - sum a[i,q] pi[i]. (8) * i!=p * * Let in solution to the transformed problem column q be non-basic * with lower bound active (GLP_NL, lambda~[q] >= 0), and this lower * bound be implied one l'[q]. From the original problem's standpoint * this then means that actually the original column lower bound l[q] * is inactive, and active is that row bound L[p] or U[p] that defines * the implied bound l'[q] (2). In this case in solution to the * original problem column q is assigned status GLP_BS while row p is * assigned status GLP_NL (if a[p,q] > 0) or GLP_NU (if a[p,q] < 0). * Since now column q is basic, its multiplier lambda[q] is zero. This * allows using (7) and (8) to find multiplier for row p in solution to * the original problem: * * 1 * pi[p] = ------ (c[q] - sum a[i,q] pi[i]) = lambda~[q] / a[p,q] (9) * a[p,q] i!=p * * Now let in solution to the transformed problem column q be non-basic * with upper bound active (GLP_NU, lambda~[q] <= 0), and this upper * bound be implied one u'[q]. As in the previous case this then means * that from the original problem's standpoint actually the original * column upper bound u[q] is inactive, and active is that row bound * L[p] or U[p] that defines the implied bound u'[q] (3). In this case * in solution to the original problem column q is assigned status * GLP_BS, row p is assigned status GLP_NU (if a[p,q] > 0) or GLP_NL * (if a[p,q] < 0), and its multiplier is computed with formula (9). * * Strengthening bounds of column q according to (5) and (6) may make * it fixed. Thus, if in solution to the transformed problem column q is * non-basic and fixed (GLP_NS), we can suppose that if lambda~[q] > 0, * column q has active lower bound (GLP_NL), and if lambda~[q] < 0, * column q has active upper bound (GLP_NU), reducing this case to two * previous ones. If, however, lambda~[q] is close to zero or * corresponding bound of row p does not exist (this may happen if * lambda~[q] has wrong sign due to round-off errors, in which case it * is expected to be close to zero, since solution is assumed to be dual * feasible), column q can be assigned status GLP_BS (basic), and row p * can be made active on its existing bound. In the latter case row * multiplier pi[p] computed with formula (9) will be also close to * zero, and dual feasibility will be kept. * * In all other cases, namely, if in solution to the transformed * problem column q is basic (GLP_BS), or non-basic with original lower * bound l[q] active (GLP_NL), or non-basic with original upper bound * u[q] active (GLP_NU), constraint (1) is inactive. So in solution to * the original problem status of column q remains unchanged, row p is * assigned status GLP_BS, and its multiplier pi[p] is assigned zero * value. * * RECOVERING INTERIOR-POINT SOLUTION * * First, value of multiplier for column q in solution to the original * problem is computed with formula (8). If lambda~[q] > 0 and column q * has implied lower bound, or if lambda~[q] < 0 and column q has * implied upper bound, this means that from the original problem's * standpoint actually row p has corresponding active bound, in which * case its multiplier pi[p] is computed with formula (9). In other * cases, when the sign of lambda~[q] corresponds to original bound of * column q, or when lambda~[q] =~ 0, value of row multiplier pi[p] is * assigned zero value. * * RECOVERING MIP SOLUTION * * None needed. */ struct ineq_singlet { /* row singleton (inequality constraint) */ int p; /* row reference number */ int q; /* column reference number */ double apq; /* constraint coefficient a[p,q] */ double c; /* objective coefficient at x[q] */ double lb; /* row lower bound */ double ub; /* row upper bound */ char lb_changed; /* this flag is set if column lower bound was changed */ char ub_changed; /* this flag is set if column upper bound was changed */ NPPLFE *ptr; /* list of non-zero coefficients a[i,q], i != p */ }; static int rcv_ineq_singlet(NPP *npp, void *info); int npp_ineq_singlet(NPP *npp, NPPROW *p) { /* process row singleton (inequality constraint) */ struct ineq_singlet *info; NPPCOL *q; NPPAIJ *apq, *aij; NPPLFE *lfe; int lb_changed, ub_changed; double ll, uu; /* the row must be singleton inequality constraint */ xassert(p->lb != -DBL_MAX || p->ub != +DBL_MAX); xassert(p->lb < p->ub); xassert(p->ptr != NULL && p->ptr->r_next == NULL); /* compute implied column bounds */ apq = p->ptr; q = apq->col; xassert(q->lb < q->ub); if (apq->val > 0.0) { ll = (p->lb == -DBL_MAX ? -DBL_MAX : p->lb / apq->val); uu = (p->ub == +DBL_MAX ? +DBL_MAX : p->ub / apq->val); } else { ll = (p->ub == +DBL_MAX ? -DBL_MAX : p->ub / apq->val); uu = (p->lb == -DBL_MAX ? +DBL_MAX : p->lb / apq->val); } /* process implied column lower bound */ if (ll == -DBL_MAX) lb_changed = 0; else { lb_changed = npp_implied_lower(npp, q, ll); xassert(0 <= lb_changed && lb_changed <= 4); if (lb_changed == 4) return 4; /* infeasible */ } /* process implied column upper bound */ if (uu == +DBL_MAX) ub_changed = 0; else if (lb_changed == 3) { /* column was fixed on its upper bound due to l'[q] = u[q] */ /* note that L[p] < U[p], so l'[q] = u[q] < u'[q] */ ub_changed = 0; } else { ub_changed = npp_implied_upper(npp, q, uu); xassert(0 <= ub_changed && ub_changed <= 4); if (ub_changed == 4) return 4; /* infeasible */ } /* if neither lower nor upper column bound was changed, the row is originally redundant and can be replaced by free row */ if (!lb_changed && !ub_changed) { p->lb = -DBL_MAX, p->ub = +DBL_MAX; npp_free_row(npp, p); return 0; } /* create transformation stack entry */ info = npp_push_tse(npp, rcv_ineq_singlet, sizeof(struct ineq_singlet)); info->p = p->i; info->q = q->j; info->apq = apq->val; info->c = q->coef; info->lb = p->lb; info->ub = p->ub; info->lb_changed = (char)lb_changed; info->ub_changed = (char)ub_changed; info->ptr = NULL; /* save column coefficients a[i,q], i != p (not needed for MIP solution) */ if (npp->sol != GLP_MIP) { for (aij = q->ptr; aij != NULL; aij = aij->c_next) { if (aij == apq) continue; /* skip a[p,q] */ lfe = dmp_get_atom(npp->stack, sizeof(NPPLFE)); lfe->ref = aij->row->i; lfe->val = aij->val; lfe->next = info->ptr; info->ptr = lfe; } } /* remove the row from the problem */ npp_del_row(npp, p); return lb_changed >= ub_changed ? lb_changed : ub_changed; } static int rcv_ineq_singlet(NPP *npp, void *_info) { /* recover row singleton (inequality constraint) */ struct ineq_singlet *info = _info; NPPLFE *lfe; double lambda; if (npp->sol == GLP_MIP) goto done; /* compute lambda~[q] in solution to the transformed problem with formula (8) */ lambda = info->c; for (lfe = info->ptr; lfe != NULL; lfe = lfe->next) lambda -= lfe->val * npp->r_pi[lfe->ref]; if (npp->sol == GLP_SOL) { /* recover basic solution */ if (npp->c_stat[info->q] == GLP_BS) { /* column q is basic, so row p is inactive */ npp->r_stat[info->p] = GLP_BS; npp->r_pi[info->p] = 0.0; } else if (npp->c_stat[info->q] == GLP_NL) nl: { /* column q is non-basic with lower bound active */ if (info->lb_changed) { /* it is implied bound, so actually row p is active while column q is basic */ npp->r_stat[info->p] = (char)(info->apq > 0.0 ? GLP_NL : GLP_NU); npp->c_stat[info->q] = GLP_BS; npp->r_pi[info->p] = lambda / info->apq; } else { /* it is original bound, so row p is inactive */ npp->r_stat[info->p] = GLP_BS; npp->r_pi[info->p] = 0.0; } } else if (npp->c_stat[info->q] == GLP_NU) nu: { /* column q is non-basic with upper bound active */ if (info->ub_changed) { /* it is implied bound, so actually row p is active while column q is basic */ npp->r_stat[info->p] = (char)(info->apq > 0.0 ? GLP_NU : GLP_NL); npp->c_stat[info->q] = GLP_BS; npp->r_pi[info->p] = lambda / info->apq; } else { /* it is original bound, so row p is inactive */ npp->r_stat[info->p] = GLP_BS; npp->r_pi[info->p] = 0.0; } } else if (npp->c_stat[info->q] == GLP_NS) { /* column q is non-basic and fixed; note, however, that in in the original problem it is non-fixed */ if (lambda > +1e-7) { if (info->apq > 0.0 && info->lb != -DBL_MAX || info->apq < 0.0 && info->ub != +DBL_MAX || !info->lb_changed) { /* either corresponding bound of row p exists or column q remains non-basic with its original lower bound active */ npp->c_stat[info->q] = GLP_NL; goto nl; } } if (lambda < -1e-7) { if (info->apq > 0.0 && info->ub != +DBL_MAX || info->apq < 0.0 && info->lb != -DBL_MAX || !info->ub_changed) { /* either corresponding bound of row p exists or column q remains non-basic with its original upper bound active */ npp->c_stat[info->q] = GLP_NU; goto nu; } } /* either lambda~[q] is close to zero, or corresponding bound of row p does not exist, because lambda~[q] has wrong sign due to round-off errors; in the latter case lambda~[q] is also assumed to be close to zero; so, we can make row p active on its existing bound and column q basic; pi[p] will have wrong sign, but it also will be close to zero (rarus casus of dual degeneracy) */ if (info->lb != -DBL_MAX && info->ub == +DBL_MAX) { /* row lower bound exists, but upper bound doesn't */ npp->r_stat[info->p] = GLP_NL; } else if (info->lb == -DBL_MAX && info->ub != +DBL_MAX) { /* row upper bound exists, but lower bound doesn't */ npp->r_stat[info->p] = GLP_NU; } else if (info->lb != -DBL_MAX && info->ub != +DBL_MAX) { /* both row lower and upper bounds exist */ /* to choose proper active row bound we should not use lambda~[q], because its value being close to zero is unreliable; so we choose that bound which provides primal feasibility for original constraint (1) */ if (info->apq * npp->c_value[info->q] <= 0.5 * (info->lb + info->ub)) npp->r_stat[info->p] = GLP_NL; else npp->r_stat[info->p] = GLP_NU; } else { npp_error(); return 1; } npp->c_stat[info->q] = GLP_BS; npp->r_pi[info->p] = lambda / info->apq; } else { npp_error(); return 1; } } if (npp->sol == GLP_IPT) { /* recover interior-point solution */ if (lambda > +DBL_EPSILON && info->lb_changed || lambda < -DBL_EPSILON && info->ub_changed) { /* actually row p has corresponding active bound */ npp->r_pi[info->p] = lambda / info->apq; } else { /* either bounds of column q are both inactive or its original bound is active */ npp->r_pi[info->p] = 0.0; } } done: return 0; } /*********************************************************************** * NAME * * npp_implied_slack - process column singleton (implied slack variable) * * SYNOPSIS * * #include "glpnpp.h" * void npp_implied_slack(NPP *npp, NPPCOL *q); * * DESCRIPTION * * The routine npp_implied_slack processes column q: * * l[q] <= x[q] <= u[q], (1) * * where l[q] < u[q], having the only non-zero coefficient in row p, * which is equality constraint: * * sum a[p,j] x[j] + a[p,q] x[q] = b. (2) * j!=q * * PROBLEM TRANSFORMATION * * (If x[q] is integral, this transformation must not be used.) * * The term a[p,q] x[q] in constraint (2) can be considered as a slack * variable that allows to carry bounds of column q over row p and then * remove column q from the problem. * * Constraint (2) can be written as follows: * * sum a[p,j] x[j] = b - a[p,q] x[q]. (3) * j!=q * * According to (1) constraint (3) is equivalent to the following * inequality constraint: * * L[p] <= sum a[p,j] x[j] <= U[p], (4) * j!=q * * where * * ( b - a[p,q] u[q], if a[p,q] > 0 * L[p] = < (5) * ( b - a[p,q] l[q], if a[p,q] < 0 * * ( b - a[p,q] l[q], if a[p,q] > 0 * U[p] = < (6) * ( b - a[p,q] u[q], if a[p,q] < 0 * * From (2) it follows that: * * 1 * x[q] = ------ (b - sum a[p,j] x[j]). (7) * a[p,q] j!=q * * In order to eliminate x[q] from the objective row we substitute it * from (6) to that row: * * z = sum c[j] x[j] + c[q] x[q] + c[0] = * j!=q * 1 * = sum c[j] x[j] + c[q] [------ (b - sum a[p,j] x[j])] + c0 = * j!=q a[p,q] j!=q * * = sum c~[j] x[j] + c~[0], * j!=q * a[p,j] b * c~[j] = c[j] - c[q] ------, c~0 = c0 - c[q] ------ (8) * a[p,q] a[p,q] * * are values of objective coefficients and constant term, resp., in * the transformed problem. * * Note that column q is column singleton, so in the dual system of the * original problem it corresponds to the following row singleton: * * a[p,q] pi[p] + lambda[q] = c[q]. (9) * * In the transformed problem row (9) would be the following: * * a[p,q] pi~[p] + lambda[q] = c~[q] = 0. (10) * * Subtracting (10) from (9) we have: * * a[p,q] (pi[p] - pi~[p]) = c[q] * * that gives the following formula to compute multiplier for row p in * solution to the original problem using its value in solution to the * transformed problem: * * pi[p] = pi~[p] + c[q] / a[p,q]. (11) * * RECOVERING BASIC SOLUTION * * Status of column q in solution to the original problem is defined * by status of row p in solution to the transformed problem and the * sign of coefficient a[p,q] in the original inequality constraint (2) * as follows: * * +-----------------------+---------+--------------------+ * | Status of row p | Sign of | Status of column q | * | (transformed problem) | a[p,q] | (original problem) | * +-----------------------+---------+--------------------+ * | GLP_BS | + / - | GLP_BS | * | GLP_NL | + | GLP_NU | * | GLP_NL | - | GLP_NL | * | GLP_NU | + | GLP_NL | * | GLP_NU | - | GLP_NU | * | GLP_NF | + / - | GLP_NF | * +-----------------------+---------+--------------------+ * * Value of column q is computed with formula (7). Since originally row * p is equality constraint, its status is assigned GLP_NS, and value of * its multiplier pi[p] is computed with formula (11). * * RECOVERING INTERIOR-POINT SOLUTION * * Value of column q is computed with formula (7). Row multiplier value * pi[p] is computed with formula (11). * * RECOVERING MIP SOLUTION * * Value of column q is computed with formula (7). */ struct implied_slack { /* column singleton (implied slack variable) */ int p; /* row reference number */ int q; /* column reference number */ double apq; /* constraint coefficient a[p,q] */ double b; /* right-hand side of original equality constraint */ double c; /* original objective coefficient at x[q] */ NPPLFE *ptr; /* list of non-zero coefficients a[p,j], j != q */ }; static int rcv_implied_slack(NPP *npp, void *info); void npp_implied_slack(NPP *npp, NPPCOL *q) { /* process column singleton (implied slack variable) */ struct implied_slack *info; NPPROW *p; NPPAIJ *aij; NPPLFE *lfe; /* the column must be non-integral non-fixed singleton */ xassert(!q->is_int); xassert(q->lb < q->ub); xassert(q->ptr != NULL && q->ptr->c_next == NULL); /* corresponding row must be equality constraint */ aij = q->ptr; p = aij->row; xassert(p->lb == p->ub); /* create transformation stack entry */ info = npp_push_tse(npp, rcv_implied_slack, sizeof(struct implied_slack)); info->p = p->i; info->q = q->j; info->apq = aij->val; info->b = p->lb; info->c = q->coef; info->ptr = NULL; /* save row coefficients a[p,j], j != q, and substitute x[q] into the objective row */ for (aij = p->ptr; aij != NULL; aij = aij->r_next) { if (aij->col == q) continue; /* skip a[p,q] */ lfe = dmp_get_atom(npp->stack, sizeof(NPPLFE)); lfe->ref = aij->col->j; lfe->val = aij->val; lfe->next = info->ptr; info->ptr = lfe; aij->col->coef -= info->c * (aij->val / info->apq); } npp->c0 += info->c * (info->b / info->apq); /* compute new row bounds */ if (info->apq > 0.0) { p->lb = (q->ub == +DBL_MAX ? -DBL_MAX : info->b - info->apq * q->ub); p->ub = (q->lb == -DBL_MAX ? +DBL_MAX : info->b - info->apq * q->lb); } else { p->lb = (q->lb == -DBL_MAX ? -DBL_MAX : info->b - info->apq * q->lb); p->ub = (q->ub == +DBL_MAX ? +DBL_MAX : info->b - info->apq * q->ub); } /* remove the column from the problem */ npp_del_col(npp, q); return; } static int rcv_implied_slack(NPP *npp, void *_info) { /* recover column singleton (implied slack variable) */ struct implied_slack *info = _info; NPPLFE *lfe; double temp; if (npp->sol == GLP_SOL) { /* assign statuses to row p and column q */ if (npp->r_stat[info->p] == GLP_BS || npp->r_stat[info->p] == GLP_NF) npp->c_stat[info->q] = npp->r_stat[info->p]; else if (npp->r_stat[info->p] == GLP_NL) npp->c_stat[info->q] = (char)(info->apq > 0.0 ? GLP_NU : GLP_NL); else if (npp->r_stat[info->p] == GLP_NU) npp->c_stat[info->q] = (char)(info->apq > 0.0 ? GLP_NL : GLP_NU); else { npp_error(); return 1; } npp->r_stat[info->p] = GLP_NS; } if (npp->sol != GLP_MIP) { /* compute multiplier for row p */ npp->r_pi[info->p] += info->c / info->apq; } /* compute value of column q */ temp = info->b; for (lfe = info->ptr; lfe != NULL; lfe = lfe->next) temp -= lfe->val * npp->c_value[lfe->ref]; npp->c_value[info->q] = temp / info->apq; return 0; } /*********************************************************************** * NAME * * npp_implied_free - process column singleton (implied free variable) * * SYNOPSIS * * #include "glpnpp.h" * int npp_implied_free(NPP *npp, NPPCOL *q); * * DESCRIPTION * * The routine npp_implied_free processes column q: * * l[q] <= x[q] <= u[q], (1) * * having non-zero coefficient in the only row p, which is inequality * constraint: * * L[p] <= sum a[p,j] x[j] + a[p,q] x[q] <= U[p], (2) * j!=q * * where l[q] < u[q], L[p] < U[p], L[p] > -oo and/or U[p] < +oo. * * RETURNS * * 0 - success; * * 1 - column lower and/or upper bound(s) can be active; * * 2 - problem has no dual feasible solution. * * PROBLEM TRANSFORMATION * * Constraint (2) can be written as follows: * * L[p] - sum a[p,j] x[j] <= a[p,q] x[q] <= U[p] - sum a[p,j] x[j], * j!=q j!=q * * from which it follows that: * * alfa <= a[p,q] x[q] <= beta, (3) * * where * * alfa = inf(L[p] - sum a[p,j] x[j]) = * j!=q * * = L[p] - sup sum a[p,j] x[j] = (4) * j!=q * * = L[p] - sum a[p,j] u[j] - sum a[p,j] l[j], * j in Jp j in Jn * * beta = sup(L[p] - sum a[p,j] x[j]) = * j!=q * * = L[p] - inf sum a[p,j] x[j] = (5) * j!=q * * = L[p] - sum a[p,j] l[j] - sum a[p,j] u[j], * j in Jp j in Jn * * Jp = {j != q: a[p,j] > 0}, Jn = {j != q: a[p,j] < 0}. (6) * * Inequality (3) defines implied bounds of variable x[q]: * * l'[q] <= x[q] <= u'[q], (7) * * where * * ( alfa / a[p,q], if a[p,q] > 0 * l'[q] = < (8a) * ( beta / a[p,q], if a[p,q] < 0 * * ( beta / a[p,q], if a[p,q] > 0 * u'[q] = < (8b) * ( alfa / a[p,q], if a[p,q] < 0 * * Thus, if l'[q] > l[q] - eps and u'[q] < u[q] + eps, where eps is * an absolute tolerance for column value, column bounds (1) cannot be * active, in which case column q can be replaced by equivalent free * (unbounded) column. * * Note that column q is column singleton, so in the dual system of the * original problem it corresponds to the following row singleton: * * a[p,q] pi[p] + lambda[q] = c[q], (9) * * from which it follows that: * * pi[p] = (c[q] - lambda[q]) / a[p,q]. (10) * * Let x[q] be implied free (unbounded) variable. Then column q can be * only basic, so its multiplier lambda[q] is equal to zero, and from * (10) we have: * * pi[p] = c[q] / a[p,q]. (11) * * There are possible three cases: * * 1) pi[p] < -eps, where eps is an absolute tolerance for row * multiplier. In this case, to provide dual feasibility of the * original problem, row p must be active on its lower bound, and * if its lower bound does not exist (L[p] = -oo), the problem has * no dual feasible solution; * * 2) pi[p] > +eps. In this case row p must be active on its upper * bound, and if its upper bound does not exist (U[p] = +oo), the * problem has no dual feasible solution; * * 3) -eps <= pi[p] <= +eps. In this case any (either lower or upper) * bound of row p can be active, because this does not affect dual * feasibility. * * Thus, in all three cases original inequality constraint (2) can be * replaced by equality constraint, where the right-hand side is either * lower or upper bound of row p, and bounds of column q can be removed * that makes it free (unbounded). (May note that this transformation * can be followed by transformation "Column singleton (implied slack * variable)" performed by the routine npp_implied_slack.) * * RECOVERING BASIC SOLUTION * * Status of row p in solution to the original problem is determined * by its status in solution to the transformed problem and its bound, * which was choosen to be active: * * +-----------------------+--------+--------------------+ * | Status of row p | Active | Status of row p | * | (transformed problem) | bound | (original problem) | * +-----------------------+--------+--------------------+ * | GLP_BS | L[p] | GLP_BS | * | GLP_BS | U[p] | GLP_BS | * | GLP_NS | L[p] | GLP_NL | * | GLP_NS | U[p] | GLP_NU | * +-----------------------+--------+--------------------+ * * Value of row multiplier pi[p] (as well as value of column q) in * solution to the original problem is the same as in solution to the * transformed problem. * * RECOVERING INTERIOR-POINT SOLUTION * * Value of row multiplier pi[p] in solution to the original problem is * the same as in solution to the transformed problem. * * RECOVERING MIP SOLUTION * * None needed. */ struct implied_free { /* column singleton (implied free variable) */ int p; /* row reference number */ char stat; /* row status: GLP_NL - active constraint on lower bound GLP_NU - active constraint on upper bound */ }; static int rcv_implied_free(NPP *npp, void *info); int npp_implied_free(NPP *npp, NPPCOL *q) { /* process column singleton (implied free variable) */ struct implied_free *info; NPPROW *p; NPPAIJ *apq, *aij; double alfa, beta, l, u, pi, eps; /* the column must be non-fixed singleton */ xassert(q->lb < q->ub); xassert(q->ptr != NULL && q->ptr->c_next == NULL); /* corresponding row must be inequality constraint */ apq = q->ptr; p = apq->row; xassert(p->lb != -DBL_MAX || p->ub != +DBL_MAX); xassert(p->lb < p->ub); /* compute alfa */ alfa = p->lb; if (alfa != -DBL_MAX) { for (aij = p->ptr; aij != NULL; aij = aij->r_next) { if (aij == apq) continue; /* skip a[p,q] */ if (aij->val > 0.0) { if (aij->col->ub == +DBL_MAX) { alfa = -DBL_MAX; break; } alfa -= aij->val * aij->col->ub; } else /* < 0.0 */ { if (aij->col->lb == -DBL_MAX) { alfa = -DBL_MAX; break; } alfa -= aij->val * aij->col->lb; } } } /* compute beta */ beta = p->ub; if (beta != +DBL_MAX) { for (aij = p->ptr; aij != NULL; aij = aij->r_next) { if (aij == apq) continue; /* skip a[p,q] */ if (aij->val > 0.0) { if (aij->col->lb == -DBL_MAX) { beta = +DBL_MAX; break; } beta -= aij->val * aij->col->lb; } else /* < 0.0 */ { if (aij->col->ub == +DBL_MAX) { beta = +DBL_MAX; break; } beta -= aij->val * aij->col->ub; } } } /* compute implied column lower bound l'[q] */ if (apq->val > 0.0) l = (alfa == -DBL_MAX ? -DBL_MAX : alfa / apq->val); else /* < 0.0 */ l = (beta == +DBL_MAX ? -DBL_MAX : beta / apq->val); /* compute implied column upper bound u'[q] */ if (apq->val > 0.0) u = (beta == +DBL_MAX ? +DBL_MAX : beta / apq->val); else u = (alfa == -DBL_MAX ? +DBL_MAX : alfa / apq->val); /* check if column lower bound l[q] can be active */ if (q->lb != -DBL_MAX) { eps = 1e-9 + 1e-12 * fabs(q->lb); if (l < q->lb - eps) return 1; /* yes, it can */ } /* check if column upper bound u[q] can be active */ if (q->ub != +DBL_MAX) { eps = 1e-9 + 1e-12 * fabs(q->ub); if (u > q->ub + eps) return 1; /* yes, it can */ } /* okay; make column q free (unbounded) */ q->lb = -DBL_MAX, q->ub = +DBL_MAX; /* create transformation stack entry */ info = npp_push_tse(npp, rcv_implied_free, sizeof(struct implied_free)); info->p = p->i; info->stat = -1; /* compute row multiplier pi[p] */ pi = q->coef / apq->val; /* check dual feasibility for row p */ if (pi > +DBL_EPSILON) { /* lower bound L[p] must be active */ if (p->lb != -DBL_MAX) nl: { info->stat = GLP_NL; p->ub = p->lb; } else { if (pi > +1e-5) return 2; /* dual infeasibility */ /* take a chance on U[p] */ xassert(p->ub != +DBL_MAX); goto nu; } } else if (pi < -DBL_EPSILON) { /* upper bound U[p] must be active */ if (p->ub != +DBL_MAX) nu: { info->stat = GLP_NU; p->lb = p->ub; } else { if (pi < -1e-5) return 2; /* dual infeasibility */ /* take a chance on L[p] */ xassert(p->lb != -DBL_MAX); goto nl; } } else { /* any bound (either L[p] or U[p]) can be made active */ if (p->ub == +DBL_MAX) { xassert(p->lb != -DBL_MAX); goto nl; } if (p->lb == -DBL_MAX) { xassert(p->ub != +DBL_MAX); goto nu; } if (fabs(p->lb) <= fabs(p->ub)) goto nl; else goto nu; } return 0; } static int rcv_implied_free(NPP *npp, void *_info) { /* recover column singleton (implied free variable) */ struct implied_free *info = _info; if (npp->sol == GLP_SOL) { if (npp->r_stat[info->p] == GLP_BS) npp->r_stat[info->p] = GLP_BS; else if (npp->r_stat[info->p] == GLP_NS) { xassert(info->stat == GLP_NL || info->stat == GLP_NU); npp->r_stat[info->p] = info->stat; } else { npp_error(); return 1; } } return 0; } /*********************************************************************** * NAME * * npp_eq_doublet - process row doubleton (equality constraint) * * SYNOPSIS * * #include "glpnpp.h" * NPPCOL *npp_eq_doublet(NPP *npp, NPPROW *p); * * DESCRIPTION * * The routine npp_eq_doublet processes row p, which is equality * constraint having exactly two non-zero coefficients: * * a[p,q] x[q] + a[p,r] x[r] = b. (1) * * As the result of processing one of columns q or r is eliminated from * all other rows and, thus, becomes column singleton of type "implied * slack variable". Row p is not changed and along with column q and r * remains in the problem. * * RETURNS * * The routine npp_eq_doublet returns pointer to the descriptor of that * column q or r which has been eliminated. If, due to some reason, the * elimination was not performed, the routine returns NULL. * * PROBLEM TRANSFORMATION * * First, we decide which column q or r will be eliminated. Let it be * column q. Consider i-th constraint row, where column q has non-zero * coefficient a[i,q] != 0: * * L[i] <= sum a[i,j] x[j] <= U[i]. (2) * j * * In order to eliminate column q from row (2) we subtract from it row * (1) multiplied by gamma[i] = a[i,q] / a[p,q], i.e. we replace in the * transformed problem row (2) by its linear combination with row (1). * This transformation changes only coefficients in columns q and r, * and bounds of row i as follows: * * a~[i,q] = a[i,q] - gamma[i] a[p,q] = 0, (3) * * a~[i,r] = a[i,r] - gamma[i] a[p,r], (4) * * L~[i] = L[i] - gamma[i] b, (5) * * U~[i] = U[i] - gamma[i] b. (6) * * RECOVERING BASIC SOLUTION * * The transformation of the primal system of the original problem: * * L <= A x <= U (7) * * is equivalent to multiplying from the left a transformation matrix F * by components of this primal system, which in the transformed problem * becomes the following: * * F L <= F A x <= F U ==> L~ <= A~x <= U~. (8) * * The matrix F has the following structure: * * ( 1 -gamma[1] ) * ( ) * ( 1 -gamma[2] ) * ( ) * ( ... ... ) * ( ) * F = ( 1 -gamma[p-1] ) (9) * ( ) * ( 1 ) * ( ) * ( -gamma[p+1] 1 ) * ( ) * ( ... ... ) * * where its column containing elements -gamma[i] corresponds to row p * of the primal system. * * From (8) it follows that the dual system of the original problem: * * A'pi + lambda = c, (10) * * in the transformed problem becomes the following: * * A'F'inv(F')pi + lambda = c ==> (A~)'pi~ + lambda = c, (11) * * where: * * pi~ = inv(F')pi (12) * * is the vector of row multipliers in the transformed problem. Thus: * * pi = F'pi~. (13) * * Therefore, as it follows from (13), value of multiplier for row p in * solution to the original problem can be computed as follows: * * pi[p] = pi~[p] - sum gamma[i] pi~[i], (14) * i * * where pi~[i] = pi[i] is multiplier for row i (i != p). * * Note that the statuses of all rows and columns are not changed. * * RECOVERING INTERIOR-POINT SOLUTION * * Multiplier for row p in solution to the original problem is computed * with formula (14). * * RECOVERING MIP SOLUTION * * None needed. */ struct eq_doublet { /* row doubleton (equality constraint) */ int p; /* row reference number */ double apq; /* constraint coefficient a[p,q] */ NPPLFE *ptr; /* list of non-zero coefficients a[i,q], i != p */ }; static int rcv_eq_doublet(NPP *npp, void *info); NPPCOL *npp_eq_doublet(NPP *npp, NPPROW *p) { /* process row doubleton (equality constraint) */ struct eq_doublet *info; NPPROW *i; NPPCOL *q, *r; NPPAIJ *apq, *apr, *aiq, *air, *next; NPPLFE *lfe; double gamma; /* the row must be doubleton equality constraint */ xassert(p->lb == p->ub); xassert(p->ptr != NULL && p->ptr->r_next != NULL && p->ptr->r_next->r_next == NULL); /* choose column to be eliminated */ { NPPAIJ *a1, *a2; a1 = p->ptr, a2 = a1->r_next; if (fabs(a2->val) < 0.001 * fabs(a1->val)) { /* only first column can be eliminated, because second one has too small constraint coefficient */ apq = a1, apr = a2; } else if (fabs(a1->val) < 0.001 * fabs(a2->val)) { /* only second column can be eliminated, because first one has too small constraint coefficient */ apq = a2, apr = a1; } else { /* both columns are appropriate; choose that one which is shorter to minimize fill-in */ if (npp_col_nnz(npp, a1->col) <= npp_col_nnz(npp, a2->col)) { /* first column is shorter */ apq = a1, apr = a2; } else { /* second column is shorter */ apq = a2, apr = a1; } } } /* now columns q and r have been chosen */ q = apq->col, r = apr->col; /* create transformation stack entry */ info = npp_push_tse(npp, rcv_eq_doublet, sizeof(struct eq_doublet)); info->p = p->i; info->apq = apq->val; info->ptr = NULL; /* transform each row i (i != p), where a[i,q] != 0, to eliminate column q */ for (aiq = q->ptr; aiq != NULL; aiq = next) { next = aiq->c_next; if (aiq == apq) continue; /* skip row p */ i = aiq->row; /* row i to be transformed */ /* save constraint coefficient a[i,q] */ if (npp->sol != GLP_MIP) { lfe = dmp_get_atom(npp->stack, sizeof(NPPLFE)); lfe->ref = i->i; lfe->val = aiq->val; lfe->next = info->ptr; info->ptr = lfe; } /* find coefficient a[i,r] in row i */ for (air = i->ptr; air != NULL; air = air->r_next) if (air->col == r) break; /* if a[i,r] does not exist, create a[i,r] = 0 */ if (air == NULL) air = npp_add_aij(npp, i, r, 0.0); /* compute gamma[i] = a[i,q] / a[p,q] */ gamma = aiq->val / apq->val; /* (row i) := (row i) - gamma[i] * (row p); see (3)-(6) */ /* new a[i,q] is exact zero due to elimnation; remove it from row i */ npp_del_aij(npp, aiq); /* compute new a[i,r] */ air->val -= gamma * apr->val; /* if new a[i,r] is close to zero due to numeric cancelation, remove it from row i */ if (fabs(air->val) <= 1e-10) npp_del_aij(npp, air); /* compute new lower and upper bounds of row i */ if (i->lb == i->ub) i->lb = i->ub = (i->lb - gamma * p->lb); else { if (i->lb != -DBL_MAX) i->lb -= gamma * p->lb; if (i->ub != +DBL_MAX) i->ub -= gamma * p->lb; } } return q; } static int rcv_eq_doublet(NPP *npp, void *_info) { /* recover row doubleton (equality constraint) */ struct eq_doublet *info = _info; NPPLFE *lfe; double gamma, temp; /* we assume that processing row p is followed by processing column q as singleton of type "implied slack variable", in which case row p must always be active equality constraint */ if (npp->sol == GLP_SOL) { if (npp->r_stat[info->p] != GLP_NS) { npp_error(); return 1; } } if (npp->sol != GLP_MIP) { /* compute value of multiplier for row p; see (14) */ temp = npp->r_pi[info->p]; for (lfe = info->ptr; lfe != NULL; lfe = lfe->next) { gamma = lfe->val / info->apq; /* a[i,q] / a[p,q] */ temp -= gamma * npp->r_pi[lfe->ref]; } npp->r_pi[info->p] = temp; } return 0; } /*********************************************************************** * NAME * * npp_forcing_row - process forcing row * * SYNOPSIS * * #include "glpnpp.h" * int npp_forcing_row(NPP *npp, NPPROW *p, int at); * * DESCRIPTION * * The routine npp_forcing row processes row p of general format: * * L[p] <= sum a[p,j] x[j] <= U[p], (1) * j * * l[j] <= x[j] <= u[j], (2) * * where L[p] <= U[p] and l[j] < u[j] for all a[p,j] != 0. It is also * assumed that: * * 1) if at = 0 then |L[p] - U'[p]| <= eps, where U'[p] is implied * row upper bound (see below), eps is an absolute tolerance for row * value; * * 2) if at = 1 then |U[p] - L'[p]| <= eps, where L'[p] is implied * row lower bound (see below). * * RETURNS * * 0 - success; * * 1 - cannot fix columns due to too small constraint coefficients. * * PROBLEM TRANSFORMATION * * Implied lower and upper bounds of row (1) are determined by bounds * of corresponding columns (variables) as follows: * * L'[p] = inf sum a[p,j] x[j] = * j * (3) * = sum a[p,j] l[j] + sum a[p,j] u[j], * j in Jp j in Jn * * U'[p] = sup sum a[p,j] x[j] = * (4) * = sum a[p,j] u[j] + sum a[p,j] l[j], * j in Jp j in Jn * * Jp = {j: a[p,j] > 0}, Jn = {j: a[p,j] < 0}. (5) * * If L[p] =~ U'[p] (at = 0), solution can be primal feasible only when * all variables take their boundary values as defined by (4): * * ( u[j], if j in Jp * x[j] = < (6) * ( l[j], if j in Jn * * Similarly, if U[p] =~ L'[p] (at = 1), solution can be primal feasible * only when all variables take their boundary values as defined by (3): * * ( l[j], if j in Jp * x[j] = < (7) * ( u[j], if j in Jn * * Condition (6) or (7) allows fixing all columns (variables x[j]) * in row (1) on their bounds and then removing them from the problem * (see the routine npp_fixed_col). Due to this row p becomes redundant, * so it can be replaced by equivalent free (unbounded) row and also * removed from the problem (see the routine npp_free_row). * * 1. To apply this transformation row (1) should not have coefficients * whose magnitude is too small, i.e. all a[p,j] should satisfy to * the following condition: * * |a[p,j]| >= eps * max(1, |a[p,k]|), (8) * k * where eps is a relative tolerance for constraint coefficients. * Otherwise, fixing columns may be numerically unreliable and may * lead to wrong solution. * * 2. The routine fixes columns and remove bounds of row p, however, * it does not remove the row and columns from the problem. * * RECOVERING BASIC SOLUTION * * In the transformed problem row p being inactive constraint is * assigned status GLP_BS (as the result of transformation of free * row), and all columns in this row are assigned status GLP_NS (as the * result of transformation of fixed columns). * * Note that in the dual system of the transformed (as well as original) * problem every column j in row p corresponds to the following row: * * sum a[i,j] pi[i] + a[p,j] pi[p] + lambda[j] = c[j], (9) * i!=p * * from which it follows that: * * lambda[j] = c[j] - sum a[i,j] pi[i] - a[p,j] pi[p]. (10) * i!=p * * In the transformed problem values of all multipliers pi[i] are known * (including pi[i], whose value is zero, since row p is inactive). * Thus, using formula (10) it is possible to compute values of * multipliers lambda[j] for all columns in row p. * * Note also that in the original problem all columns in row p are * bounded, not fixed. So status GLP_NS assigned to every such column * must be changed to GLP_NL or GLP_NU depending on which bound the * corresponding column has been fixed. This status change may lead to * dual feasibility violation for solution of the original problem, * because now column multipliers must satisfy to the following * condition: * * ( >= 0, if status of column j is GLP_NL, * lambda[j] < (11) * ( <= 0, if status of column j is GLP_NU. * * If this condition holds, solution to the original problem is the * same as to the transformed problem. Otherwise, we have to perform * one degenerate pivoting step of the primal simplex method to obtain * dual feasible (hence, optimal) solution to the original problem as * follows. If, on problem transformation, row p was made active on its * lower bound (case at = 0), we change its status to GLP_NL (or GLP_NS) * and start increasing its multiplier pi[p]. Otherwise, if row p was * made active on its upper bound (case at = 1), we change its status * to GLP_NU (or GLP_NS) and start decreasing pi[p]. From (10) it * follows that: * * delta lambda[j] = - a[p,j] * delta pi[p] = - a[p,j] pi[p]. (12) * * Simple analysis of formulae (3)-(5) shows that changing pi[p] in the * specified direction causes increasing lambda[j] for every column j * assigned status GLP_NL (delta lambda[j] > 0) and decreasing lambda[j] * for every column j assigned status GLP_NU (delta lambda[j] < 0). It * is understood that once the last lambda[q], which violates condition * (11), has reached zero, multipliers lambda[j] for all columns get * valid signs. Such column q can be determined as follows. Let d[j] be * initial value of lambda[j] (i.e. reduced cost of column j) in the * transformed problem computed with formula (10) when pi[p] = 0. Then * lambda[j] = d[j] + delta lambda[j], and from (12) it follows that * lambda[j] becomes zero if: * * delta lambda[j] = - a[p,j] pi[p] = - d[j] ==> * (13) * pi[p] = d[j] / a[p,j]. * * Therefore, the last column q, for which lambda[q] becomes zero, can * be determined from the following condition: * * |d[q] / a[p,q]| = max |pi[p]| = max |d[j] / a[p,j]|, (14) * j in D j in D * * where D is a set of columns j whose, reduced costs d[j] have invalid * signs, i.e. violate condition (11). (Thus, if D is empty, solution * to the original problem is the same as solution to the transformed * problem, and no correction is needed as was noticed above.) In * solution to the original problem column q is assigned status GLP_BS, * since it replaces column of auxiliary variable of row p (becoming * active) in the basis, and multiplier for row p is assigned its new * value, which is pi[p] = d[q] / a[p,q]. Note that due to primal * degeneracy values of all columns having non-zero coefficients in row * p remain unchanged. * * RECOVERING INTERIOR-POINT SOLUTION * * Value of multiplier pi[p] in solution to the original problem is * corrected in the same way as for basic solution. Values of all * columns having non-zero coefficients in row p remain unchanged. * * RECOVERING MIP SOLUTION * * None needed. */ struct forcing_col { /* column fixed on its bound by forcing row */ int j; /* column reference number */ char stat; /* original column status: GLP_NL - fixed on lower bound GLP_NU - fixed on upper bound */ double a; /* constraint coefficient a[p,j] */ double c; /* objective coefficient c[j] */ NPPLFE *ptr; /* list of non-zero coefficients a[i,j], i != p */ struct forcing_col *next; /* pointer to another column fixed by forcing row */ }; struct forcing_row { /* forcing row */ int p; /* row reference number */ char stat; /* status assigned to the row if it becomes active: GLP_NS - active equality constraint GLP_NL - inequality constraint with lower bound active GLP_NU - inequality constraint with upper bound active */ struct forcing_col *ptr; /* list of all columns having non-zero constraint coefficient a[p,j] in the forcing row */ }; static int rcv_forcing_row(NPP *npp, void *info); int npp_forcing_row(NPP *npp, NPPROW *p, int at) { /* process forcing row */ struct forcing_row *info; struct forcing_col *col = NULL; NPPCOL *j; NPPAIJ *apj, *aij; NPPLFE *lfe; double big; xassert(at == 0 || at == 1); /* determine maximal magnitude of the row coefficients */ big = 1.0; for (apj = p->ptr; apj != NULL; apj = apj->r_next) if (big < fabs(apj->val)) big = fabs(apj->val); /* if there are too small coefficients in the row, transformation should not be applied */ for (apj = p->ptr; apj != NULL; apj = apj->r_next) if (fabs(apj->val) < 1e-7 * big) return 1; /* create transformation stack entry */ info = npp_push_tse(npp, rcv_forcing_row, sizeof(struct forcing_row)); info->p = p->i; if (p->lb == p->ub) { /* equality constraint */ info->stat = GLP_NS; } else if (at == 0) { /* inequality constraint; case L[p] = U'[p] */ info->stat = GLP_NL; xassert(p->lb != -DBL_MAX); } else /* at == 1 */ { /* inequality constraint; case U[p] = L'[p] */ info->stat = GLP_NU; xassert(p->ub != +DBL_MAX); } info->ptr = NULL; /* scan the forcing row, fix columns at corresponding bounds, and save column information (the latter is not needed for MIP) */ for (apj = p->ptr; apj != NULL; apj = apj->r_next) { /* column j has non-zero coefficient in the forcing row */ j = apj->col; /* it must be non-fixed */ xassert(j->lb < j->ub); /* allocate stack entry to save column information */ if (npp->sol != GLP_MIP) { col = dmp_get_atom(npp->stack, sizeof(struct forcing_col)); col->j = j->j; col->stat = -1; /* will be set below */ col->a = apj->val; col->c = j->coef; col->ptr = NULL; col->next = info->ptr; info->ptr = col; } /* fix column j */ if (at == 0 && apj->val < 0.0 || at != 0 && apj->val > 0.0) { /* at its lower bound */ if (npp->sol != GLP_MIP) col->stat = GLP_NL; xassert(j->lb != -DBL_MAX); j->ub = j->lb; } else { /* at its upper bound */ if (npp->sol != GLP_MIP) col->stat = GLP_NU; xassert(j->ub != +DBL_MAX); j->lb = j->ub; } /* save column coefficients a[i,j], i != p */ if (npp->sol != GLP_MIP) { for (aij = j->ptr; aij != NULL; aij = aij->c_next) { if (aij == apj) continue; /* skip a[p,j] */ lfe = dmp_get_atom(npp->stack, sizeof(NPPLFE)); lfe->ref = aij->row->i; lfe->val = aij->val; lfe->next = col->ptr; col->ptr = lfe; } } } /* make the row free (unbounded) */ p->lb = -DBL_MAX, p->ub = +DBL_MAX; return 0; } static int rcv_forcing_row(NPP *npp, void *_info) { /* recover forcing row */ struct forcing_row *info = _info; struct forcing_col *col, *piv; NPPLFE *lfe; double d, big, temp; if (npp->sol == GLP_MIP) goto done; /* initially solution to the original problem is the same as to the transformed problem, where row p is inactive constraint with pi[p] = 0, and all columns are non-basic */ if (npp->sol == GLP_SOL) { if (npp->r_stat[info->p] != GLP_BS) { npp_error(); return 1; } for (col = info->ptr; col != NULL; col = col->next) { if (npp->c_stat[col->j] != GLP_NS) { npp_error(); return 1; } npp->c_stat[col->j] = col->stat; /* original status */ } } /* compute reduced costs d[j] for all columns with formula (10) and store them in col.c instead objective coefficients */ for (col = info->ptr; col != NULL; col = col->next) { d = col->c; for (lfe = col->ptr; lfe != NULL; lfe = lfe->next) d -= lfe->val * npp->r_pi[lfe->ref]; col->c = d; } /* consider columns j, whose multipliers lambda[j] has wrong sign in solution to the transformed problem (where lambda[j] = d[j]), and choose column q, whose multipler lambda[q] reaches zero last on changing row multiplier pi[p]; see (14) */ piv = NULL, big = 0.0; for (col = info->ptr; col != NULL; col = col->next) { d = col->c; /* d[j] */ temp = fabs(d / col->a); if (col->stat == GLP_NL) { /* column j has active lower bound */ if (d < 0.0 && big < temp) piv = col, big = temp; } else if (col->stat == GLP_NU) { /* column j has active upper bound */ if (d > 0.0 && big < temp) piv = col, big = temp; } else { npp_error(); return 1; } } /* if column q does not exist, no correction is needed */ if (piv != NULL) { /* correct solution; row p becomes active constraint while column q becomes basic */ if (npp->sol == GLP_SOL) { npp->r_stat[info->p] = info->stat; npp->c_stat[piv->j] = GLP_BS; } /* assign new value to row multiplier pi[p] = d[p] / a[p,q] */ npp->r_pi[info->p] = piv->c / piv->a; } done: return 0; } /*********************************************************************** * NAME * * npp_analyze_row - perform general row analysis * * SYNOPSIS * * #include "glpnpp.h" * int npp_analyze_row(NPP *npp, NPPROW *p); * * DESCRIPTION * * The routine npp_analyze_row performs analysis of row p of general * format: * * L[p] <= sum a[p,j] x[j] <= U[p], (1) * j * * l[j] <= x[j] <= u[j], (2) * * where L[p] <= U[p] and l[j] <= u[j] for all a[p,j] != 0. * * RETURNS * * 0x?0 - row lower bound does not exist or is redundant; * * 0x?1 - row lower bound can be active; * * 0x?2 - row lower bound is a forcing bound; * * 0x0? - row upper bound does not exist or is redundant; * * 0x1? - row upper bound can be active; * * 0x2? - row upper bound is a forcing bound; * * 0x33 - row bounds are inconsistent with column bounds. * * ALGORITHM * * Analysis of row (1) is based on analysis of its implied lower and * upper bounds, which are determined by bounds of corresponding columns * (variables) as follows: * * L'[p] = inf sum a[p,j] x[j] = * j * (3) * = sum a[p,j] l[j] + sum a[p,j] u[j], * j in Jp j in Jn * * U'[p] = sup sum a[p,j] x[j] = * (4) * = sum a[p,j] u[j] + sum a[p,j] l[j], * j in Jp j in Jn * * Jp = {j: a[p,j] > 0}, Jn = {j: a[p,j] < 0}. (5) * * (Note that bounds of all columns in row p are assumed to be correct, * so L'[p] <= U'[p].) * * Analysis of row lower bound L[p] includes the following cases: * * 1) if L[p] > U'[p] + eps, where eps is an absolute tolerance for row * value, row lower bound L[p] and implied row upper bound U'[p] are * inconsistent, ergo, the problem has no primal feasible solution; * * 2) if U'[p] - eps <= L[p] <= U'[p] + eps, i.e. if L[p] =~ U'[p], * the row is a forcing row on its lower bound (see description of * the routine npp_forcing_row); * * 3) if L[p] > L'[p] + eps, row lower bound L[p] can be active (this * conclusion does not account other rows in the problem); * * 4) if L[p] <= L'[p] + eps, row lower bound L[p] cannot be active, so * it is redundant and can be removed (replaced by -oo). * * Analysis of row upper bound U[p] is performed in a similar way and * includes the following cases: * * 1) if U[p] < L'[p] - eps, row upper bound U[p] and implied row lower * bound L'[p] are inconsistent, ergo the problem has no primal * feasible solution; * * 2) if L'[p] - eps <= U[p] <= L'[p] + eps, i.e. if U[p] =~ L'[p], * the row is a forcing row on its upper bound (see description of * the routine npp_forcing_row); * * 3) if U[p] < U'[p] - eps, row upper bound U[p] can be active (this * conclusion does not account other rows in the problem); * * 4) if U[p] >= U'[p] - eps, row upper bound U[p] cannot be active, so * it is redundant and can be removed (replaced by +oo). */ int npp_analyze_row(NPP *npp, NPPROW *p) { /* perform general row analysis */ NPPAIJ *aij; int ret = 0x00; double l, u, eps; xassert(npp == npp); /* compute implied lower bound L'[p]; see (3) */ l = 0.0; for (aij = p->ptr; aij != NULL; aij = aij->r_next) { if (aij->val > 0.0) { if (aij->col->lb == -DBL_MAX) { l = -DBL_MAX; break; } l += aij->val * aij->col->lb; } else /* aij->val < 0.0 */ { if (aij->col->ub == +DBL_MAX) { l = -DBL_MAX; break; } l += aij->val * aij->col->ub; } } /* compute implied upper bound U'[p]; see (4) */ u = 0.0; for (aij = p->ptr; aij != NULL; aij = aij->r_next) { if (aij->val > 0.0) { if (aij->col->ub == +DBL_MAX) { u = +DBL_MAX; break; } u += aij->val * aij->col->ub; } else /* aij->val < 0.0 */ { if (aij->col->lb == -DBL_MAX) { u = +DBL_MAX; break; } u += aij->val * aij->col->lb; } } /* column bounds are assumed correct, so L'[p] <= U'[p] */ /* check if row lower bound is consistent */ if (p->lb != -DBL_MAX) { eps = 1e-3 + 1e-6 * fabs(p->lb); if (p->lb - eps > u) { ret = 0x33; goto done; } } /* check if row upper bound is consistent */ if (p->ub != +DBL_MAX) { eps = 1e-3 + 1e-6 * fabs(p->ub); if (p->ub + eps < l) { ret = 0x33; goto done; } } /* check if row lower bound can be active/forcing */ if (p->lb != -DBL_MAX) { eps = 1e-9 + 1e-12 * fabs(p->lb); if (p->lb - eps > l) { if (p->lb + eps <= u) ret |= 0x01; else ret |= 0x02; } } /* check if row upper bound can be active/forcing */ if (p->ub != +DBL_MAX) { eps = 1e-9 + 1e-12 * fabs(p->ub); if (p->ub + eps < u) { /* check if the upper bound is forcing */ if (p->ub - eps >= l) ret |= 0x10; else ret |= 0x20; } } done: return ret; } /*********************************************************************** * NAME * * npp_inactive_bound - remove row lower/upper inactive bound * * SYNOPSIS * * #include "glpnpp.h" * void npp_inactive_bound(NPP *npp, NPPROW *p, int which); * * DESCRIPTION * * The routine npp_inactive_bound removes lower (if which = 0) or upper * (if which = 1) bound of row p: * * L[p] <= sum a[p,j] x[j] <= U[p], * * which (bound) is assumed to be redundant. * * PROBLEM TRANSFORMATION * * If which = 0, current lower bound L[p] of row p is assigned -oo. * If which = 1, current upper bound U[p] of row p is assigned +oo. * * RECOVERING BASIC SOLUTION * * If in solution to the transformed problem row p is inactive * constraint (GLP_BS), its status is not changed in solution to the * original problem. Otherwise, status of row p in solution to the * original problem is defined by its type before transformation and * its status in solution to the transformed problem as follows: * * +---------------------+-------+---------------+---------------+ * | Row | Flag | Row status in | Row status in | * | type | which | transfmd soln | original soln | * +---------------------+-------+---------------+---------------+ * | sum >= L[p] | 0 | GLP_NF | GLP_NL | * | sum <= U[p] | 1 | GLP_NF | GLP_NU | * | L[p] <= sum <= U[p] | 0 | GLP_NU | GLP_NU | * | L[p] <= sum <= U[p] | 1 | GLP_NL | GLP_NL | * | sum = L[p] = U[p] | 0 | GLP_NU | GLP_NS | * | sum = L[p] = U[p] | 1 | GLP_NL | GLP_NS | * +---------------------+-------+---------------+---------------+ * * RECOVERING INTERIOR-POINT SOLUTION * * None needed. * * RECOVERING MIP SOLUTION * * None needed. */ struct inactive_bound { /* row inactive bound */ int p; /* row reference number */ char stat; /* row status (if active constraint) */ }; static int rcv_inactive_bound(NPP *npp, void *info); void npp_inactive_bound(NPP *npp, NPPROW *p, int which) { /* remove row lower/upper inactive bound */ struct inactive_bound *info; if (npp->sol == GLP_SOL) { /* create transformation stack entry */ info = npp_push_tse(npp, rcv_inactive_bound, sizeof(struct inactive_bound)); info->p = p->i; if (p->ub == +DBL_MAX) info->stat = GLP_NL; else if (p->lb == -DBL_MAX) info->stat = GLP_NU; else if (p->lb != p->ub) info->stat = (char)(which == 0 ? GLP_NU : GLP_NL); else info->stat = GLP_NS; } /* remove row inactive bound */ if (which == 0) { xassert(p->lb != -DBL_MAX); p->lb = -DBL_MAX; } else if (which == 1) { xassert(p->ub != +DBL_MAX); p->ub = +DBL_MAX; } else xassert(which != which); return; } static int rcv_inactive_bound(NPP *npp, void *_info) { /* recover row status */ struct inactive_bound *info = _info; if (npp->sol != GLP_SOL) { npp_error(); return 1; } if (npp->r_stat[info->p] == GLP_BS) npp->r_stat[info->p] = GLP_BS; else npp->r_stat[info->p] = info->stat; return 0; } /*********************************************************************** * NAME * * npp_implied_bounds - determine implied column bounds * * SYNOPSIS * * #include "glpnpp.h" * void npp_implied_bounds(NPP *npp, NPPROW *p); * * DESCRIPTION * * The routine npp_implied_bounds inspects general row (constraint) p: * * L[p] <= sum a[p,j] x[j] <= U[p], (1) * * l[j] <= x[j] <= u[j], (2) * * where L[p] <= U[p] and l[j] <= u[j] for all a[p,j] != 0, to compute * implied bounds of columns (variables x[j]) in this row. * * The routine stores implied column bounds l'[j] and u'[j] in column * descriptors (NPPCOL); it does not change current column bounds l[j] * and u[j]. (Implied column bounds can be then used to strengthen the * current column bounds; see the routines npp_implied_lower and * npp_implied_upper). * * ALGORITHM * * Current column bounds (2) define implied lower and upper bounds of * row (1) as follows: * * L'[p] = inf sum a[p,j] x[j] = * j * (3) * = sum a[p,j] l[j] + sum a[p,j] u[j], * j in Jp j in Jn * * U'[p] = sup sum a[p,j] x[j] = * (4) * = sum a[p,j] u[j] + sum a[p,j] l[j], * j in Jp j in Jn * * Jp = {j: a[p,j] > 0}, Jn = {j: a[p,j] < 0}. (5) * * (Note that bounds of all columns in row p are assumed to be correct, * so L'[p] <= U'[p].) * * If L[p] > L'[p] and/or U[p] < U'[p], the lower and/or upper bound of * row (1) can be active, in which case such row defines implied bounds * of its variables. * * Let x[k] be some variable having in row (1) coefficient a[p,k] != 0. * Consider a case when row lower bound can be active (L[p] > L'[p]): * * sum a[p,j] x[j] >= L[p] ==> * j * * sum a[p,j] x[j] + a[p,k] x[k] >= L[p] ==> * j!=k * (6) * a[p,k] x[k] >= L[p] - sum a[p,j] x[j] ==> * j!=k * * a[p,k] x[k] >= L[p,k], * * where * * L[p,k] = inf(L[p] - sum a[p,j] x[j]) = * j!=k * * = L[p] - sup sum a[p,j] x[j] = (7) * j!=k * * = L[p] - sum a[p,j] u[j] - sum a[p,j] l[j]. * j in Jp\{k} j in Jn\{k} * * Thus: * * x[k] >= l'[k] = L[p,k] / a[p,k], if a[p,k] > 0, (8) * * x[k] <= u'[k] = L[p,k] / a[p,k], if a[p,k] < 0. (9) * * where l'[k] and u'[k] are implied lower and upper bounds of variable * x[k], resp. * * Now consider a similar case when row upper bound can be active * (U[p] < U'[p]): * * sum a[p,j] x[j] <= U[p] ==> * j * * sum a[p,j] x[j] + a[p,k] x[k] <= U[p] ==> * j!=k * (10) * a[p,k] x[k] <= U[p] - sum a[p,j] x[j] ==> * j!=k * * a[p,k] x[k] <= U[p,k], * * where: * * U[p,k] = sup(U[p] - sum a[p,j] x[j]) = * j!=k * * = U[p] - inf sum a[p,j] x[j] = (11) * j!=k * * = U[p] - sum a[p,j] l[j] - sum a[p,j] u[j]. * j in Jp\{k} j in Jn\{k} * * Thus: * * x[k] <= u'[k] = U[p,k] / a[p,k], if a[p,k] > 0, (12) * * x[k] >= l'[k] = U[p,k] / a[p,k], if a[p,k] < 0. (13) * * Note that in formulae (8), (9), (12), and (13) coefficient a[p,k] * must not be too small in magnitude relatively to other non-zero * coefficients in row (1), i.e. the following condition must hold: * * |a[p,k]| >= eps * max(1, |a[p,j]|), (14) * j * * where eps is a relative tolerance for constraint coefficients. * Otherwise the implied column bounds can be numerical inreliable. For * example, using formula (8) for the following inequality constraint: * * 1e-12 x1 - x2 - x3 >= 0, * * where x1 >= -1, x2, x3, >= 0, may lead to numerically unreliable * conclusion that x1 >= 0. * * Using formulae (8), (9), (12), and (13) to compute implied bounds * for one variable requires |J| operations, where J = {j: a[p,j] != 0}, * because this needs computing L[p,k] and U[p,k]. Thus, computing * implied bounds for all variables in row (1) would require |J|^2 * operations, that is not a good technique. However, the total number * of operations can be reduced to |J| as follows. * * Let a[p,k] > 0. Then from (7) and (11) we have: * * L[p,k] = L[p] - (U'[p] - a[p,k] u[k]) = * * = L[p] - U'[p] + a[p,k] u[k], * * U[p,k] = U[p] - (L'[p] - a[p,k] l[k]) = * * = U[p] - L'[p] + a[p,k] l[k], * * where L'[p] and U'[p] are implied row lower and upper bounds defined * by formulae (3) and (4). Substituting these expressions into (8) and * (12) gives: * * l'[k] = L[p,k] / a[p,k] = u[k] + (L[p] - U'[p]) / a[p,k], (15) * * u'[k] = U[p,k] / a[p,k] = l[k] + (U[p] - L'[p]) / a[p,k]. (16) * * Similarly, if a[p,k] < 0, according to (7) and (11) we have: * * L[p,k] = L[p] - (U'[p] - a[p,k] l[k]) = * * = L[p] - U'[p] + a[p,k] l[k], * * U[p,k] = U[p] - (L'[p] - a[p,k] u[k]) = * * = U[p] - L'[p] + a[p,k] u[k], * * and substituting these expressions into (8) and (12) gives: * * l'[k] = U[p,k] / a[p,k] = u[k] + (U[p] - L'[p]) / a[p,k], (17) * * u'[k] = L[p,k] / a[p,k] = l[k] + (L[p] - U'[p]) / a[p,k]. (18) * * Note that formulae (15)-(18) can be used only if L'[p] and U'[p] * exist. However, if for some variable x[j] it happens that l[j] = -oo * and/or u[j] = +oo, values of L'[p] (if a[p,j] > 0) and/or U'[p] (if * a[p,j] < 0) are undefined. Consider, therefore, the most general * situation, when some column bounds (2) may not exist. * * Let: * * J' = {j : (a[p,j] > 0 and l[j] = -oo) or * (19) * (a[p,j] < 0 and u[j] = +oo)}. * * Then (assuming that row upper bound U[p] can be active) the following * three cases are possible: * * 1) |J'| = 0. In this case L'[p] exists, thus, for all variables x[j] * in row (1) we can use formulae (16) and (17); * * 2) J' = {k}. In this case L'[p] = -oo, however, U[p,k] (11) exists, * so for variable x[k] we can use formulae (12) and (13). Note that * for all other variables x[j] (j != k) l'[j] = -oo (if a[p,j] < 0) * or u'[j] = +oo (if a[p,j] > 0); * * 3) |J'| > 1. In this case for all variables x[j] in row [1] we have * l'[j] = -oo (if a[p,j] < 0) or u'[j] = +oo (if a[p,j] > 0). * * Similarly, let: * * J'' = {j : (a[p,j] > 0 and u[j] = +oo) or * (20) * (a[p,j] < 0 and l[j] = -oo)}. * * Then (assuming that row lower bound L[p] can be active) the following * three cases are possible: * * 1) |J''| = 0. In this case U'[p] exists, thus, for all variables x[j] * in row (1) we can use formulae (15) and (18); * * 2) J'' = {k}. In this case U'[p] = +oo, however, L[p,k] (7) exists, * so for variable x[k] we can use formulae (8) and (9). Note that * for all other variables x[j] (j != k) l'[j] = -oo (if a[p,j] > 0) * or u'[j] = +oo (if a[p,j] < 0); * * 3) |J''| > 1. In this case for all variables x[j] in row (1) we have * l'[j] = -oo (if a[p,j] > 0) or u'[j] = +oo (if a[p,j] < 0). */ void npp_implied_bounds(NPP *npp, NPPROW *p) { NPPAIJ *apj, *apk; double big, eps, temp; xassert(npp == npp); /* initialize implied bounds for all variables and determine maximal magnitude of row coefficients a[p,j] */ big = 1.0; for (apj = p->ptr; apj != NULL; apj = apj->r_next) { apj->col->ll.ll = -DBL_MAX, apj->col->uu.uu = +DBL_MAX; if (big < fabs(apj->val)) big = fabs(apj->val); } eps = 1e-6 * big; /* process row lower bound (assuming that it can be active) */ if (p->lb != -DBL_MAX) { apk = NULL; for (apj = p->ptr; apj != NULL; apj = apj->r_next) { if (apj->val > 0.0 && apj->col->ub == +DBL_MAX || apj->val < 0.0 && apj->col->lb == -DBL_MAX) { if (apk == NULL) apk = apj; else goto skip1; } } /* if a[p,k] = NULL then |J'| = 0 else J' = { k } */ temp = p->lb; for (apj = p->ptr; apj != NULL; apj = apj->r_next) { if (apj == apk) /* skip a[p,k] */; else if (apj->val > 0.0) temp -= apj->val * apj->col->ub; else /* apj->val < 0.0 */ temp -= apj->val * apj->col->lb; } /* compute column implied bounds */ if (apk == NULL) { /* temp = L[p] - U'[p] */ for (apj = p->ptr; apj != NULL; apj = apj->r_next) { if (apj->val >= +eps) { /* l'[j] := u[j] + (L[p] - U'[p]) / a[p,j] */ apj->col->ll.ll = apj->col->ub + temp / apj->val; } else if (apj->val <= -eps) { /* u'[j] := l[j] + (L[p] - U'[p]) / a[p,j] */ apj->col->uu.uu = apj->col->lb + temp / apj->val; } } } else { /* temp = L[p,k] */ if (apk->val >= +eps) { /* l'[k] := L[p,k] / a[p,k] */ apk->col->ll.ll = temp / apk->val; } else if (apk->val <= -eps) { /* u'[k] := L[p,k] / a[p,k] */ apk->col->uu.uu = temp / apk->val; } } skip1: ; } /* process row upper bound (assuming that it can be active) */ if (p->ub != +DBL_MAX) { apk = NULL; for (apj = p->ptr; apj != NULL; apj = apj->r_next) { if (apj->val > 0.0 && apj->col->lb == -DBL_MAX || apj->val < 0.0 && apj->col->ub == +DBL_MAX) { if (apk == NULL) apk = apj; else goto skip2; } } /* if a[p,k] = NULL then |J''| = 0 else J'' = { k } */ temp = p->ub; for (apj = p->ptr; apj != NULL; apj = apj->r_next) { if (apj == apk) /* skip a[p,k] */; else if (apj->val > 0.0) temp -= apj->val * apj->col->lb; else /* apj->val < 0.0 */ temp -= apj->val * apj->col->ub; } /* compute column implied bounds */ if (apk == NULL) { /* temp = U[p] - L'[p] */ for (apj = p->ptr; apj != NULL; apj = apj->r_next) { if (apj->val >= +eps) { /* u'[j] := l[j] + (U[p] - L'[p]) / a[p,j] */ apj->col->uu.uu = apj->col->lb + temp / apj->val; } else if (apj->val <= -eps) { /* l'[j] := u[j] + (U[p] - L'[p]) / a[p,j] */ apj->col->ll.ll = apj->col->ub + temp / apj->val; } } } else { /* temp = U[p,k] */ if (apk->val >= +eps) { /* u'[k] := U[p,k] / a[p,k] */ apk->col->uu.uu = temp / apk->val; } else if (apk->val <= -eps) { /* l'[k] := U[p,k] / a[p,k] */ apk->col->ll.ll = temp / apk->val; } } skip2: ; } return; } /* eof */