From 3e4fe5811c1df7b7bb9e23e25a57193c2badc690 Mon Sep 17 00:00:00 2001 From: Clifford Wolf Date: Sat, 20 Aug 2016 19:04:30 +0200 Subject: Some minor README changes --- README.md | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'README.md') diff --git a/README.md b/README.md index 49d68bb..6c6e060 100644 --- a/README.md +++ b/README.md @@ -172,8 +172,8 @@ This parameter is only available for the `picorv32` core. In the #### TWO_STAGE_SHIFT (default = 1) -By default shift operations are performed in two stages: first shift in units -of 4 bits and then shift in units of 1 bit. This speeds up shift operations, +By default shift operations are performed in two stages: first shifts in units +of 4 bits and then shifts in units of 1 bit. This speeds up shift operations, but adds additional hardware. Set this parameter to 0 to disable the two-stage shift to further reduce the size of the core. @@ -181,7 +181,7 @@ shift to further reduce the size of the core. By default shift operations are performed by successively shifting by a small amount (see `TWO_STAGE_SHIFT` above). With this option set, a barrel -shifter is used instead instead. +shifter is used instead. #### TWO_CYCLE_COMPARE (default = 0) @@ -203,8 +203,7 @@ the ALU. #### COMPRESSED_ISA (default = 0) -This enables support for the RISC-V Compressed Instruction Set. Currently -this implements the draft version 1.9 of the compressed ISA specification. +This enables support for the RISC-V Compressed Instruction Set. #### CATCH_MISALIGN (default = 1) @@ -391,7 +390,7 @@ normal interface. In the clock cycle before `mem_valid` goes high, this interface will output a pulse on `mem_la_read` or `mem_la_write` to indicate the start of a read or -write transaction in the next clock cycles. +write transaction in the next clock cycle. *Note: The signals `mem_la_read`, `mem_la_write`, and `mem_la_addr` are driven by combinatorial circuits within the PicoRV32 core. It might be harder to -- cgit