From 7bf87502aa70052042cd2e9d8ff9da593a887aa6 Mon Sep 17 00:00:00 2001
From: Tom Verbeure <tom_verbeure@yahoo.com>
Date: Mon, 29 Aug 2016 21:12:08 -0700
Subject: Clone vivado dir into quartus dir

---
 scripts/quartus/.gitignore             |  18 +++++
 scripts/quartus/Makefile               |  65 +++++++++++++++
 scripts/quartus/firmware.S             |  12 +++
 scripts/quartus/firmware.c             |  43 ++++++++++
 scripts/quartus/firmware.lds           |  11 +++
 scripts/quartus/synth_area.tcl         |   8 ++
 scripts/quartus/synth_area.xdc         |   1 +
 scripts/quartus/synth_area_large.tcl   |  10 +++
 scripts/quartus/synth_area_regular.tcl |  10 +++
 scripts/quartus/synth_area_small.tcl   |  10 +++
 scripts/quartus/synth_area_top.v       | 140 +++++++++++++++++++++++++++++++++
 scripts/quartus/synth_speed.tcl        |  13 +++
 scripts/quartus/synth_speed.xdc        |   1 +
 scripts/quartus/synth_system.tcl       |  17 ++++
 scripts/quartus/synth_system.xdc       |  34 ++++++++
 scripts/quartus/system.v               | 101 ++++++++++++++++++++++++
 scripts/quartus/system_tb.v            |  38 +++++++++
 scripts/quartus/table.sh               |  19 +++++
 scripts/quartus/tabtest.sh             |  92 ++++++++++++++++++++++
 scripts/quartus/tabtest.v              | 118 +++++++++++++++++++++++++++
 20 files changed, 761 insertions(+)
 create mode 100644 scripts/quartus/.gitignore
 create mode 100644 scripts/quartus/Makefile
 create mode 100644 scripts/quartus/firmware.S
 create mode 100644 scripts/quartus/firmware.c
 create mode 100644 scripts/quartus/firmware.lds
 create mode 100644 scripts/quartus/synth_area.tcl
 create mode 100644 scripts/quartus/synth_area.xdc
 create mode 100644 scripts/quartus/synth_area_large.tcl
 create mode 100644 scripts/quartus/synth_area_regular.tcl
 create mode 100644 scripts/quartus/synth_area_small.tcl
 create mode 100644 scripts/quartus/synth_area_top.v
 create mode 100644 scripts/quartus/synth_speed.tcl
 create mode 100644 scripts/quartus/synth_speed.xdc
 create mode 100644 scripts/quartus/synth_system.tcl
 create mode 100644 scripts/quartus/synth_system.xdc
 create mode 100644 scripts/quartus/system.v
 create mode 100644 scripts/quartus/system_tb.v
 create mode 100644 scripts/quartus/table.sh
 create mode 100644 scripts/quartus/tabtest.sh
 create mode 100644 scripts/quartus/tabtest.v

(limited to 'scripts')

diff --git a/scripts/quartus/.gitignore b/scripts/quartus/.gitignore
new file mode 100644
index 0000000..2374269
--- /dev/null
+++ b/scripts/quartus/.gitignore
@@ -0,0 +1,18 @@
+.Xil/
+firmware.bin
+firmware.elf
+firmware.hex
+firmware.map
+synth_*.log
+synth_*.mmi
+synth_*.bit
+synth_system.v
+table.txt
+tab_*/
+webtalk.jou
+webtalk.log
+webtalk_*.jou
+webtalk_*.log
+xelab.*
+xsim.*
+xvlog.*
diff --git a/scripts/quartus/Makefile b/scripts/quartus/Makefile
new file mode 100644
index 0000000..4e109d2
--- /dev/null
+++ b/scripts/quartus/Makefile
@@ -0,0 +1,65 @@
+
+VIVADO_BASE = /opt/Xilinx/Vivado/2016.1
+VIVADO = $(VIVADO_BASE)/bin/vivado
+XVLOG = $(VIVADO_BASE)/bin/xvlog
+XELAB = $(VIVADO_BASE)/bin/xelab
+GLBL = $(VIVADO_BASE)/data/verilog/src/glbl.v
+TOOLCHAIN_PREFIX = riscv64-unknown-elf-
+
+export VIVADO
+
+help:
+	@echo ""
+	@echo "Simple synthesis tests:"
+	@echo "  make synth_area_{small|regular|large}"
+	@echo "  make synth_speed"
+	@echo ""
+	@echo "Example system:"
+	@echo "  make synth_system"
+	@echo "  make sim_system"
+	@echo ""
+	@echo "Timing and Utilization Evaluation:"
+	@echo "  make table.txt"
+	@echo "  make area"
+	@echo ""
+
+synth_%:
+	rm -f $@.log
+	$(VIVADO) -nojournal -log $@.log -mode batch -source $@.tcl
+	rm -rf .Xil fsm_encoding.os synth_*.backup.log usage_statistics_webtalk.*
+	-grep -B4 -A10 'Slice LUTs' $@.log
+	-grep -B1 -A9 ^Slack $@.log && echo
+
+synth_system: firmware.hex
+
+sim_system:
+	$(XVLOG) system_tb.v synth_system.v
+	$(XVLOG) $(GLBL)
+	$(XELAB) -L unifast_ver -L unisims_ver -R system_tb glbl
+
+firmware.hex: firmware.S firmware.c firmware.lds
+	$(TOOLCHAIN_PREFIX)gcc -Os -m32 -ffreestanding -nostdlib -o firmware.elf firmware.S firmware.c \
+		 --std=gnu99 -Wl,-Bstatic,-T,firmware.lds,-Map,firmware.map,--strip-debug -lgcc
+	$(TOOLCHAIN_PREFIX)objcopy -O binary firmware.elf firmware.bin
+	python3 ../../firmware/makehex.py firmware.bin 4096 > firmware.hex
+
+tab_%/results.txt:
+	bash tabtest.sh $@
+
+area: synth_area_small synth_area_regular synth_area_large
+	-grep -B4 -A10 'Slice LUTs' synth_area_small.log synth_area_regular.log synth_area_large.log
+
+table.txt: tab_small_xc7a_1/results.txt tab_small_xc7a_2/results.txt tab_small_xc7a_3/results.txt
+table.txt: tab_small_xc7k_1/results.txt tab_small_xc7k_2/results.txt tab_small_xc7k_3/results.txt
+table.txt: tab_small_xc7v_1/results.txt tab_small_xc7v_2/results.txt tab_small_xc7v_3/results.txt
+table.txt: tab_small_xcku_1/results.txt tab_small_xcku_2/results.txt tab_small_xcku_3/results.txt
+table.txt: tab_small_xcvu_1/results.txt tab_small_xcvu_2/results.txt tab_small_xcvu_3/results.txt
+
+table.txt:
+	bash table.sh > table.txt
+
+clean:
+	rm -rf .Xil/ firmware.bin firmware.elf firmware.hex firmware.map synth_*.log
+	rm -rf synth_*.mmi synth_*.bit synth_system.v table.txt tab_*/ webtalk.jou
+	rm -rf webtalk.log webtalk_*.jou webtalk_*.log xelab.* xsim[._]* xvlog.*
+
diff --git a/scripts/quartus/firmware.S b/scripts/quartus/firmware.S
new file mode 100644
index 0000000..c55a3ba
--- /dev/null
+++ b/scripts/quartus/firmware.S
@@ -0,0 +1,12 @@
+.section .init
+.global main
+
+/* set stack pointer */
+lui sp, %hi(16*1024)
+addi sp, sp, %lo(16*1024)
+
+/* call main */
+jal ra, main
+
+/* break */
+ebreak
diff --git a/scripts/quartus/firmware.c b/scripts/quartus/firmware.c
new file mode 100644
index 0000000..6c62169
--- /dev/null
+++ b/scripts/quartus/firmware.c
@@ -0,0 +1,43 @@
+void putc(char c)
+{
+	*(volatile char*)0x10000000 = c;
+}
+
+void puts(const char *s)
+{
+	while (*s) putc(*s++);
+}
+
+void *memcpy(void *dest, const void *src, int n)
+{
+	while (n) {
+		n--;
+		((char*)dest)[n] = ((char*)src)[n];
+	}
+	return dest;
+}
+
+void main()
+{
+	char message[] = "$Uryyb+Jbeyq!+Vs+lbh+pna+ernq+guvf+zrffntr+gura$gur+CvpbEI32+PCH"
+			"+frrzf+gb+or+jbexvat+whfg+svar.$$++++++++++++++++GRFG+CNFFRQ!$$";
+	for (int i = 0; message[i]; i++)
+		switch (message[i])
+		{
+		case 'a' ... 'm':
+		case 'A' ... 'M':
+			message[i] += 13;
+			break;
+		case 'n' ... 'z':
+		case 'N' ... 'Z':
+			message[i] -= 13;
+			break;
+		case '$':
+			message[i] = '\n';
+			break;
+		case '+':
+			message[i] = ' ';
+			break;
+		}
+	puts(message);
+}
diff --git a/scripts/quartus/firmware.lds b/scripts/quartus/firmware.lds
new file mode 100644
index 0000000..970000a
--- /dev/null
+++ b/scripts/quartus/firmware.lds
@@ -0,0 +1,11 @@
+SECTIONS {
+	.memory : {
+		. = 0x000000;
+		*(.init);
+		*(.text);
+		*(*);
+		. = ALIGN(4);
+		end = .;
+	}
+}
+
diff --git a/scripts/quartus/synth_area.tcl b/scripts/quartus/synth_area.tcl
new file mode 100644
index 0000000..c222a00
--- /dev/null
+++ b/scripts/quartus/synth_area.tcl
@@ -0,0 +1,8 @@
+read_verilog ../../picorv32.v
+read_xdc synth_area.xdc
+
+synth_design -part xc7k70t-fbg676 -top picorv32_axi
+opt_design -resynth_seq_area
+
+report_utilization
+report_timing
diff --git a/scripts/quartus/synth_area.xdc b/scripts/quartus/synth_area.xdc
new file mode 100644
index 0000000..3c3d5a1
--- /dev/null
+++ b/scripts/quartus/synth_area.xdc
@@ -0,0 +1 @@
+create_clock -period 20.00 [get_ports clk]
diff --git a/scripts/quartus/synth_area_large.tcl b/scripts/quartus/synth_area_large.tcl
new file mode 100644
index 0000000..af611b5
--- /dev/null
+++ b/scripts/quartus/synth_area_large.tcl
@@ -0,0 +1,10 @@
+read_verilog ../../picorv32.v
+read_verilog synth_area_top.v
+read_xdc synth_area.xdc
+
+synth_design -part xc7k70t-fbg676 -top top_large
+opt_design -sweep -propconst -resynth_seq_area
+opt_design -directive ExploreSequentialArea
+
+report_utilization
+report_timing
diff --git a/scripts/quartus/synth_area_regular.tcl b/scripts/quartus/synth_area_regular.tcl
new file mode 100644
index 0000000..2bf6b4c
--- /dev/null
+++ b/scripts/quartus/synth_area_regular.tcl
@@ -0,0 +1,10 @@
+read_verilog ../../picorv32.v
+read_verilog synth_area_top.v
+read_xdc synth_area.xdc
+
+synth_design -part xc7k70t-fbg676 -top top_regular
+opt_design -sweep -propconst -resynth_seq_area
+opt_design -directive ExploreSequentialArea
+
+report_utilization
+report_timing
diff --git a/scripts/quartus/synth_area_small.tcl b/scripts/quartus/synth_area_small.tcl
new file mode 100644
index 0000000..11d2104
--- /dev/null
+++ b/scripts/quartus/synth_area_small.tcl
@@ -0,0 +1,10 @@
+read_verilog ../../picorv32.v
+read_verilog synth_area_top.v
+read_xdc synth_area.xdc
+
+synth_design -part xc7k70t-fbg676 -top top_small
+opt_design -sweep -propconst -resynth_seq_area
+opt_design -directive ExploreSequentialArea
+
+report_utilization
+report_timing
diff --git a/scripts/quartus/synth_area_top.v b/scripts/quartus/synth_area_top.v
new file mode 100644
index 0000000..6298a86
--- /dev/null
+++ b/scripts/quartus/synth_area_top.v
@@ -0,0 +1,140 @@
+
+module top_small (
+	input clk, resetn,
+
+	output        mem_valid,
+	output        mem_instr,
+	input         mem_ready,
+
+	output [31:0] mem_addr,
+	output [31:0] mem_wdata,
+	output [ 3:0] mem_wstrb,
+	input  [31:0] mem_rdata
+);
+	picorv32 #(
+		.ENABLE_COUNTERS(0),
+		.LATCHED_MEM_RDATA(1),
+		.TWO_STAGE_SHIFT(0),
+		.CATCH_MISALIGN(0),
+		.CATCH_ILLINSN(0)
+	) picorv32 (
+		.clk      (clk      ),
+		.resetn   (resetn   ),
+		.mem_valid(mem_valid),
+		.mem_instr(mem_instr),
+		.mem_ready(mem_ready),
+		.mem_addr (mem_addr ),
+		.mem_wdata(mem_wdata),
+		.mem_wstrb(mem_wstrb),
+		.mem_rdata(mem_rdata)
+	);
+endmodule
+
+module top_regular (
+	input clk, resetn,
+	output trap,
+
+	output        mem_valid,
+	output        mem_instr,
+	input         mem_ready,
+
+	output [31:0] mem_addr,
+	output [31:0] mem_wdata,
+	output [ 3:0] mem_wstrb,
+	input  [31:0] mem_rdata,
+
+	// Look-Ahead Interface
+	output        mem_la_read,
+	output        mem_la_write,
+	output [31:0] mem_la_addr,
+	output [31:0] mem_la_wdata,
+	output [ 3:0] mem_la_wstrb
+);
+	picorv32 picorv32 (
+		.clk         (clk         ),
+		.resetn      (resetn      ),
+		.trap        (trap        ),
+		.mem_valid   (mem_valid   ),
+		.mem_instr   (mem_instr   ),
+		.mem_ready   (mem_ready   ),
+		.mem_addr    (mem_addr    ),
+		.mem_wdata   (mem_wdata   ),
+		.mem_wstrb   (mem_wstrb   ),
+		.mem_rdata   (mem_rdata   ),
+		.mem_la_read (mem_la_read ),
+		.mem_la_write(mem_la_write),
+		.mem_la_addr (mem_la_addr ),
+		.mem_la_wdata(mem_la_wdata),
+		.mem_la_wstrb(mem_la_wstrb)
+	);
+endmodule
+
+module top_large (
+	input clk, resetn,
+	output trap,
+
+	output        mem_valid,
+	output        mem_instr,
+	input         mem_ready,
+
+	output [31:0] mem_addr,
+	output [31:0] mem_wdata,
+	output [ 3:0] mem_wstrb,
+	input  [31:0] mem_rdata,
+
+	// Look-Ahead Interface
+	output        mem_la_read,
+	output        mem_la_write,
+	output [31:0] mem_la_addr,
+	output [31:0] mem_la_wdata,
+	output [ 3:0] mem_la_wstrb,
+
+	// Pico Co-Processor Interface (PCPI)
+	output        pcpi_valid,
+	output [31:0] pcpi_insn,
+	output [31:0] pcpi_rs1,
+	output [31:0] pcpi_rs2,
+	input         pcpi_wr,
+	input  [31:0] pcpi_rd,
+	input         pcpi_wait,
+	input         pcpi_ready,
+
+	// IRQ Interface
+	input  [31:0] irq,
+	output [31:0] eoi
+);
+	picorv32 #(
+		.COMPRESSED_ISA(1),
+		.BARREL_SHIFTER(1),
+		.ENABLE_PCPI(1),
+		.ENABLE_MUL(1),
+		.ENABLE_IRQ(1)
+	) picorv32 (
+		.clk            (clk            ),
+		.resetn         (resetn         ),
+		.trap           (trap           ),
+		.mem_valid      (mem_valid      ),
+		.mem_instr      (mem_instr      ),
+		.mem_ready      (mem_ready      ),
+		.mem_addr       (mem_addr       ),
+		.mem_wdata      (mem_wdata      ),
+		.mem_wstrb      (mem_wstrb      ),
+		.mem_rdata      (mem_rdata      ),
+		.mem_la_read    (mem_la_read    ),
+		.mem_la_write   (mem_la_write   ),
+		.mem_la_addr    (mem_la_addr    ),
+		.mem_la_wdata   (mem_la_wdata   ),
+		.mem_la_wstrb   (mem_la_wstrb   ),
+		.pcpi_valid     (pcpi_valid     ),
+		.pcpi_insn      (pcpi_insn      ),
+		.pcpi_rs1       (pcpi_rs1       ),
+		.pcpi_rs2       (pcpi_rs2       ),
+		.pcpi_wr        (pcpi_wr        ),
+		.pcpi_rd        (pcpi_rd        ),
+		.pcpi_wait      (pcpi_wait      ),
+		.pcpi_ready     (pcpi_ready     ),
+		.irq            (irq            ),
+		.eoi            (eoi            )
+	);
+endmodule
+
diff --git a/scripts/quartus/synth_speed.tcl b/scripts/quartus/synth_speed.tcl
new file mode 100644
index 0000000..f3874e4
--- /dev/null
+++ b/scripts/quartus/synth_speed.tcl
@@ -0,0 +1,13 @@
+
+read_verilog ../../picorv32.v
+read_xdc synth_speed.xdc
+
+synth_design -part xc7k70t-fbg676 -top picorv32_axi
+opt_design
+place_design
+phys_opt_design
+route_design
+
+report_utilization
+report_timing
+
diff --git a/scripts/quartus/synth_speed.xdc b/scripts/quartus/synth_speed.xdc
new file mode 100644
index 0000000..877ec8d
--- /dev/null
+++ b/scripts/quartus/synth_speed.xdc
@@ -0,0 +1 @@
+create_clock -period 2.50 [get_ports clk]
diff --git a/scripts/quartus/synth_system.tcl b/scripts/quartus/synth_system.tcl
new file mode 100644
index 0000000..26ea01c
--- /dev/null
+++ b/scripts/quartus/synth_system.tcl
@@ -0,0 +1,17 @@
+
+read_verilog system.v
+read_verilog ../../picorv32.v
+read_xdc synth_system.xdc
+
+synth_design -part xc7a35t-cpg236-1 -top system
+opt_design
+place_design
+route_design
+
+report_utilization
+report_timing
+
+write_verilog -force synth_system.v
+write_bitstream -force synth_system.bit
+# write_mem_info -force synth_system.mmi
+
diff --git a/scripts/quartus/synth_system.xdc b/scripts/quartus/synth_system.xdc
new file mode 100644
index 0000000..5748466
--- /dev/null
+++ b/scripts/quartus/synth_system.xdc
@@ -0,0 +1,34 @@
+
+# XDC File for Basys3 Board
+###########################
+
+set_property PACKAGE_PIN W5 [get_ports clk]
+set_property IOSTANDARD LVCMOS33 [get_ports clk]
+create_clock -period 10.00 [get_ports clk]
+
+# Pmod Header JA (JA0..JA7)
+set_property PACKAGE_PIN J1 [get_ports {out_byte[0]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {out_byte[0]}]
+set_property PACKAGE_PIN L2 [get_ports {out_byte[1]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {out_byte[1]}]
+set_property PACKAGE_PIN J2 [get_ports {out_byte[2]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {out_byte[2]}]
+set_property PACKAGE_PIN G2 [get_ports {out_byte[3]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {out_byte[3]}]
+set_property PACKAGE_PIN H1 [get_ports {out_byte[4]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {out_byte[4]}]
+set_property PACKAGE_PIN K2 [get_ports {out_byte[5]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {out_byte[5]}]
+set_property PACKAGE_PIN H2 [get_ports {out_byte[6]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {out_byte[6]}]
+set_property PACKAGE_PIN G3 [get_ports {out_byte[7]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {out_byte[7]}]
+
+# Pmod Header JB (JB0..JB2)
+set_property PACKAGE_PIN A14 [get_ports {resetn}]
+set_property IOSTANDARD LVCMOS33 [get_ports {resetn}]
+set_property PACKAGE_PIN A16 [get_ports {trap}]
+set_property IOSTANDARD LVCMOS33 [get_ports {trap}]
+set_property PACKAGE_PIN B15 [get_ports {out_byte_en}]
+set_property IOSTANDARD LVCMOS33 [get_ports {out_byte_en}]
+
diff --git a/scripts/quartus/system.v b/scripts/quartus/system.v
new file mode 100644
index 0000000..c4882a1
--- /dev/null
+++ b/scripts/quartus/system.v
@@ -0,0 +1,101 @@
+`timescale 1 ns / 1 ps
+
+module system (
+	input            clk,
+	input            resetn,
+	output           trap,
+	output reg [7:0] out_byte,
+	output reg       out_byte_en
+);
+	// set this to 0 for better timing but less performance/MHz
+	parameter FAST_MEMORY = 1;
+
+	// 4096 32bit words = 16kB memory
+	parameter MEM_SIZE = 4096;
+
+	wire mem_valid;
+	wire mem_instr;
+	reg mem_ready;
+	wire [31:0] mem_addr;
+	wire [31:0] mem_wdata;
+	wire [3:0] mem_wstrb;
+	reg [31:0] mem_rdata;
+
+	wire mem_la_read;
+	wire mem_la_write;
+	wire [31:0] mem_la_addr;
+	wire [31:0] mem_la_wdata;
+	wire [3:0] mem_la_wstrb;
+
+	picorv32 picorv32_core (
+		.clk         (clk         ),
+		.resetn      (resetn      ),
+		.trap        (trap        ),
+		.mem_valid   (mem_valid   ),
+		.mem_instr   (mem_instr   ),
+		.mem_ready   (mem_ready   ),
+		.mem_addr    (mem_addr    ),
+		.mem_wdata   (mem_wdata   ),
+		.mem_wstrb   (mem_wstrb   ),
+		.mem_rdata   (mem_rdata   ),
+		.mem_la_read (mem_la_read ),
+		.mem_la_write(mem_la_write),
+		.mem_la_addr (mem_la_addr ),
+		.mem_la_wdata(mem_la_wdata),
+		.mem_la_wstrb(mem_la_wstrb)
+	);
+
+	reg [31:0] memory [0:MEM_SIZE-1];
+	initial $readmemh("firmware.hex", memory);
+
+	reg [31:0] m_read_data;
+	reg m_read_en;
+
+	generate if (FAST_MEMORY) begin
+		always @(posedge clk) begin
+			mem_ready <= 1;
+			out_byte_en <= 0;
+			mem_rdata <= memory[mem_la_addr >> 2];
+			if (mem_la_write && (mem_la_addr >> 2) < MEM_SIZE) begin
+				if (mem_la_wstrb[0]) memory[mem_la_addr >> 2][ 7: 0] <= mem_la_wdata[ 7: 0];
+				if (mem_la_wstrb[1]) memory[mem_la_addr >> 2][15: 8] <= mem_la_wdata[15: 8];
+				if (mem_la_wstrb[2]) memory[mem_la_addr >> 2][23:16] <= mem_la_wdata[23:16];
+				if (mem_la_wstrb[3]) memory[mem_la_addr >> 2][31:24] <= mem_la_wdata[31:24];
+			end
+			else
+			if (mem_la_write && mem_la_addr == 32'h1000_0000) begin
+				out_byte_en <= 1;
+				out_byte <= mem_la_wdata;
+			end
+		end
+	end else begin
+		always @(posedge clk) begin
+			m_read_en <= 0;
+			mem_ready <= mem_valid && !mem_ready && m_read_en;
+
+			m_read_data <= memory[mem_addr >> 2];
+			mem_rdata <= m_read_data;
+
+			out_byte_en <= 0;
+
+			(* parallel_case *)
+			case (1)
+				mem_valid && !mem_ready && !mem_wstrb && (mem_addr >> 2) < MEM_SIZE: begin
+					m_read_en <= 1;
+				end
+				mem_valid && !mem_ready && |mem_wstrb && (mem_addr >> 2) < MEM_SIZE: begin
+					if (mem_wstrb[0]) memory[mem_addr >> 2][ 7: 0] <= mem_wdata[ 7: 0];
+					if (mem_wstrb[1]) memory[mem_addr >> 2][15: 8] <= mem_wdata[15: 8];
+					if (mem_wstrb[2]) memory[mem_addr >> 2][23:16] <= mem_wdata[23:16];
+					if (mem_wstrb[3]) memory[mem_addr >> 2][31:24] <= mem_wdata[31:24];
+					mem_ready <= 1;
+				end
+				mem_valid && !mem_ready && |mem_wstrb && mem_addr == 32'h1000_0000: begin
+					out_byte_en <= 1;
+					out_byte <= mem_wdata;
+					mem_ready <= 1;
+				end
+			endcase
+		end
+	end endgenerate
+endmodule
diff --git a/scripts/quartus/system_tb.v b/scripts/quartus/system_tb.v
new file mode 100644
index 0000000..a66d612
--- /dev/null
+++ b/scripts/quartus/system_tb.v
@@ -0,0 +1,38 @@
+`timescale 1 ns / 1 ps
+
+module system_tb;
+	reg clk = 1;
+	always #5 clk = ~clk;
+
+	reg resetn = 0;
+	initial begin
+		if ($test$plusargs("vcd")) begin
+			$dumpfile("system.vcd");
+			$dumpvars(0, system_tb);
+		end
+		repeat (100) @(posedge clk);
+		resetn <= 1;
+	end
+
+	wire trap;
+	wire [7:0] out_byte;
+	wire out_byte_en;
+
+	system uut (
+		.clk        (clk        ),
+		.resetn     (resetn     ),
+		.trap       (trap       ),
+		.out_byte   (out_byte   ),
+		.out_byte_en(out_byte_en)
+	);
+
+	always @(posedge clk) begin
+		if (resetn && out_byte_en) begin
+			$write("%c", out_byte);
+			$fflush;
+		end
+		if (resetn && trap) begin
+			$finish;
+		end
+	end
+endmodule
diff --git a/scripts/quartus/table.sh b/scripts/quartus/table.sh
new file mode 100644
index 0000000..f81f586
--- /dev/null
+++ b/scripts/quartus/table.sh
@@ -0,0 +1,19 @@
+#!/bin/bash
+
+dashes="----------------------------------------------------------------"
+printf '| %-25s | %-10s | %-20s |\n' "Device" "Speedgrade" "Clock Period (Freq.)"
+printf '|:%.25s |:%.10s:| %.20s:|\n' $dashes $dashes $dashes
+
+for x in $( grep -H . tab_*/results.txt )
+do
+	read _ size device grade _ speed < <( echo "$x" | tr _/: ' ' )
+	case "$device" in
+		xc7a) d="Xilinx Artix-7T" ;;
+		xc7k) d="Xilinx Kintex-7T" ;;
+		xc7v) d="Xilinx Virtex-7T" ;;
+		xcku) d="Xilinx Kintex UltraScale" ;;
+		xcvu) d="Xilinx Virtex UltraScale" ;;
+	esac
+	speedtxt=$( printf '%s.%s ns (%d MHz)' ${speed%?} ${speed#?} $((10000 / speed)) )
+	printf '| %-25s | %-10s | %20s |\n' "$d" "-$grade" "$speedtxt"
+done
diff --git a/scripts/quartus/tabtest.sh b/scripts/quartus/tabtest.sh
new file mode 100644
index 0000000..fa43fc3
--- /dev/null
+++ b/scripts/quartus/tabtest.sh
@@ -0,0 +1,92 @@
+#!/bin/bash
+
+set -e
+read _ ip dev grade _ < <( echo $* | tr '_/' ' '; )
+
+# rm -rf tab_${ip}_${dev}_${grade}
+mkdir -p tab_${ip}_${dev}_${grade}
+cd tab_${ip}_${dev}_${grade}
+
+best_speed=99
+speed=30
+step=16
+
+synth_case() {
+	if [ -f test_${1}.txt ]; then
+		echo "Reusing cached tab_${ip}_${dev}_${grade}/test_${1}."
+		return
+	fi
+
+	case "${dev}" in
+		xc7a) xl_device="xc7a15t-fgg484-${grade}" ;;
+		xc7k) xl_device="xc7k70t-fbg676-${grade}" ;;
+		xc7v) xl_device="xc7v585t-ffg1761-${grade}" ;;
+		xcku) xl_device="xcku035-fbva676-${grade}" ;;
+		xcvu) xl_device="xcvu065-ffvc1517-${grade}" ;;
+	esac
+
+	case "${dev}-${grade}" in
+		xcku-1) xl_device="${xl_device}-c" ;;
+		xcvu-1) xl_device="${xl_device}-i" ;;
+		xcku-?|xcvu-?) xl_device="${xl_device}-e" ;;
+	esac
+
+	cat > test_${1}.tcl <<- EOT
+		read_verilog ../tabtest.v
+		read_verilog ../../../picorv32.v
+		read_xdc test_${1}.xdc
+		synth_design -flatten_hierarchy full -part ${xl_device} -top top
+		opt_design -sweep -remap -propconst
+		opt_design -directive Explore
+		place_design -directive Explore
+		phys_opt_design -retime -rewire -critical_pin_opt -placement_opt -critical_cell_opt
+		route_design -directive Explore
+		place_design -post_place_opt
+		phys_opt_design -retime
+		route_design -directive NoTimingRelaxation
+		report_utilization
+		report_timing
+	EOT
+
+	cat > test_${1}.xdc <<- EOT
+		create_clock -period ${speed%?}.${speed#?} [get_ports clk]
+	EOT
+
+	echo "Running tab_${ip}_${dev}_${grade}/test_${1}.."
+	if ! $VIVADO -nojournal -log test_${1}.log -mode batch -source test_${1}.tcl > /dev/null 2>&1; then
+		cat test_${1}.log
+		exit 1
+	fi
+	mv test_${1}.log test_${1}.txt
+}
+
+countdown=2
+while [ $countdown -gt 0 ]; do
+	synth_case $speed
+
+	if grep -q '^Slack.*(VIOLATED)' test_${speed}.txt; then
+		echo "        tab_${ip}_${dev}_${grade}/test_${speed} VIOLATED"
+		[ $speed -eq 38 ] || step=$((step / 2))
+		speed=$((speed + step))
+	elif grep -q '^Slack.*(MET)' test_${speed}.txt; then
+		echo "        tab_${ip}_${dev}_${grade}/test_${speed} MET"
+		[ $speed -lt $best_speed ] && best_speed=$speed
+		step=$((step / 2))
+		speed=$((speed - step))
+	else
+		echo "ERROR: No slack line found in $PWD/test_${speed}.txt!"
+		exit 1
+	fi
+
+	if [ $step -eq 0 ]; then
+		countdown=$((countdown - 1))
+		speed=$((best_speed - 2))
+		step=1
+	fi
+done
+
+echo "-----------------------"
+echo "Best speed for tab_${ip}_${dev}_${grade}: $best_speed"
+echo "-----------------------"
+echo $best_speed > results.txt
+
diff --git a/scripts/quartus/tabtest.v b/scripts/quartus/tabtest.v
new file mode 100644
index 0000000..cdf2057
--- /dev/null
+++ b/scripts/quartus/tabtest.v
@@ -0,0 +1,118 @@
+
+module top (
+	input clk, io_resetn,
+	output io_trap,
+
+	output        io_mem_axi_awvalid,
+	input         io_mem_axi_awready,
+	output [31:0] io_mem_axi_awaddr,
+	output [ 2:0] io_mem_axi_awprot,
+
+	output        io_mem_axi_wvalid,
+	input         io_mem_axi_wready,
+	output [31:0] io_mem_axi_wdata,
+	output [ 3:0] io_mem_axi_wstrb,
+
+	input         io_mem_axi_bvalid,
+	output        io_mem_axi_bready,
+
+	output        io_mem_axi_arvalid,
+	input         io_mem_axi_arready,
+	output [31:0] io_mem_axi_araddr,
+	output [ 2:0] io_mem_axi_arprot,
+
+	input         io_mem_axi_rvalid,
+	output        io_mem_axi_rready,
+	input  [31:0] io_mem_axi_rdata,
+
+	input  [31:0] io_irq,
+	output [31:0] io_eoi
+);
+	wire resetn;
+	wire trap;
+	wire mem_axi_awvalid;
+	wire mem_axi_awready;
+	wire [31:0] mem_axi_awaddr;
+	wire [2:0] mem_axi_awprot;
+	wire mem_axi_wvalid;
+	wire mem_axi_wready;
+	wire [31:0] mem_axi_wdata;
+	wire [3:0] mem_axi_wstrb;
+	wire mem_axi_bvalid;
+	wire mem_axi_bready;
+	wire mem_axi_arvalid;
+	wire mem_axi_arready;
+	wire [31:0] mem_axi_araddr;
+	wire [2:0] mem_axi_arprot;
+	wire mem_axi_rvalid;
+	wire mem_axi_rready;
+	wire [31:0] mem_axi_rdata;
+	wire [31:0] irq;
+	wire [31:0] eoi;
+
+	delay4 #( 1) delay_resetn          (clk, io_resetn         ,    resetn         );
+	delay4 #( 1) delay_trap            (clk,    trap           , io_trap           );
+	delay4 #( 1) delay_mem_axi_awvalid (clk,    mem_axi_awvalid, io_mem_axi_awvalid);
+	delay4 #( 1) delay_mem_axi_awready (clk, io_mem_axi_awready,    mem_axi_awready);
+	delay4 #(32) delay_mem_axi_awaddr  (clk,    mem_axi_awaddr , io_mem_axi_awaddr );
+	delay4 #( 3) delay_mem_axi_awprot  (clk,    mem_axi_awprot , io_mem_axi_awprot );
+	delay4 #( 1) delay_mem_axi_wvalid  (clk,    mem_axi_wvalid , io_mem_axi_wvalid );
+	delay4 #( 1) delay_mem_axi_wready  (clk, io_mem_axi_wready ,    mem_axi_wready );
+	delay4 #(32) delay_mem_axi_wdata   (clk,    mem_axi_wdata  , io_mem_axi_wdata  );
+	delay4 #( 4) delay_mem_axi_wstrb   (clk,    mem_axi_wstrb  , io_mem_axi_wstrb  );
+	delay4 #( 1) delay_mem_axi_bvalid  (clk, io_mem_axi_bvalid ,    mem_axi_bvalid );
+	delay4 #( 1) delay_mem_axi_bready  (clk,    mem_axi_bready , io_mem_axi_bready );
+	delay4 #( 1) delay_mem_axi_arvalid (clk,    mem_axi_arvalid, io_mem_axi_arvalid);
+	delay4 #( 1) delay_mem_axi_arready (clk, io_mem_axi_arready,    mem_axi_arready);
+	delay4 #(32) delay_mem_axi_araddr  (clk,    mem_axi_araddr , io_mem_axi_araddr );
+	delay4 #( 3) delay_mem_axi_arprot  (clk,    mem_axi_arprot , io_mem_axi_arprot );
+	delay4 #( 1) delay_mem_axi_rvalid  (clk, io_mem_axi_rvalid ,    mem_axi_rvalid );
+	delay4 #( 1) delay_mem_axi_rready  (clk,    mem_axi_rready , io_mem_axi_rready );
+	delay4 #(32) delay_mem_axi_rdata   (clk, io_mem_axi_rdata  ,    mem_axi_rdata  );
+	delay4 #(32) delay_irq             (clk, io_irq            ,    irq            );
+	delay4 #(32) delay_eoi             (clk,    eoi            , io_eoi            );
+
+	picorv32_axi #(
+		.TWO_CYCLE_ALU(1)
+	) cpu (
+		.clk            (clk            ),
+		.resetn         (resetn         ),
+		.trap           (trap           ),
+		.mem_axi_awvalid(mem_axi_awvalid),
+		.mem_axi_awready(mem_axi_awready),
+		.mem_axi_awaddr (mem_axi_awaddr ),
+		.mem_axi_awprot (mem_axi_awprot ),
+		.mem_axi_wvalid (mem_axi_wvalid ),
+		.mem_axi_wready (mem_axi_wready ),
+		.mem_axi_wdata  (mem_axi_wdata  ),
+		.mem_axi_wstrb  (mem_axi_wstrb  ),
+		.mem_axi_bvalid (mem_axi_bvalid ),
+		.mem_axi_bready (mem_axi_bready ),
+		.mem_axi_arvalid(mem_axi_arvalid),
+		.mem_axi_arready(mem_axi_arready),
+		.mem_axi_araddr (mem_axi_araddr ),
+		.mem_axi_arprot (mem_axi_arprot ),
+		.mem_axi_rvalid (mem_axi_rvalid ),
+		.mem_axi_rready (mem_axi_rready ),
+		.mem_axi_rdata  (mem_axi_rdata  ),
+		.irq            (irq            ),
+		.eoi            (eoi            )
+	);
+endmodule
+
+module delay4 #(
+	parameter WIDTH = 1
+) (
+	input clk,
+	input [WIDTH-1:0] in,
+	output reg [WIDTH-1:0] out
+);
+	reg [WIDTH-1:0] q1, q2, q3;
+	always @(posedge clk) begin
+		q1 <= in;
+		q2 <= q1;
+		q3 <= q2;
+		out <= q3;
+	end
+endmodule
+
-- 
cgit 


From c96ed77c4db17ce1347553b92151a7ae85b91c01 Mon Sep 17 00:00:00 2001
From: Tom Verbeure <tom_verbeure@yahoo.com>
Date: Mon, 29 Aug 2016 21:37:29 -0700
Subject: Make sim_system work

---
 scripts/quartus/.gitignore |  9 +--------
 scripts/quartus/Makefile   | 21 +++++++++------------
 2 files changed, 10 insertions(+), 20 deletions(-)

(limited to 'scripts')

diff --git a/scripts/quartus/.gitignore b/scripts/quartus/.gitignore
index 2374269..d37ca0a 100644
--- a/scripts/quartus/.gitignore
+++ b/scripts/quartus/.gitignore
@@ -1,4 +1,3 @@
-.Xil/
 firmware.bin
 firmware.elf
 firmware.hex
@@ -9,10 +8,4 @@ synth_*.bit
 synth_system.v
 table.txt
 tab_*/
-webtalk.jou
-webtalk.log
-webtalk_*.jou
-webtalk_*.log
-xelab.*
-xsim.*
-xvlog.*
+system_tb
diff --git a/scripts/quartus/Makefile b/scripts/quartus/Makefile
index 4e109d2..7af582f 100644
--- a/scripts/quartus/Makefile
+++ b/scripts/quartus/Makefile
@@ -1,10 +1,9 @@
 
-VIVADO_BASE = /opt/Xilinx/Vivado/2016.1
-VIVADO = $(VIVADO_BASE)/bin/vivado
-XVLOG = $(VIVADO_BASE)/bin/xvlog
-XELAB = $(VIVADO_BASE)/bin/xelab
-GLBL = $(VIVADO_BASE)/data/verilog/src/glbl.v
-TOOLCHAIN_PREFIX = riscv64-unknown-elf-
+QUARTUS_ROOTDIR = /opt/altera_lite/16.0
+QUARTUS_BIN = $(QUARTUS_ROOTDIR)/quartus/bin
+
+VLOG = iverilog
+TOOLCHAIN_PREFIX = /opt/riscv32i/bin/riscv32-unknown-elf-
 
 export VIVADO
 
@@ -32,10 +31,9 @@ synth_%:
 
 synth_system: firmware.hex
 
-sim_system:
-	$(XVLOG) system_tb.v synth_system.v
-	$(XVLOG) $(GLBL)
-	$(XELAB) -L unifast_ver -L unisims_ver -R system_tb glbl
+sim_system: firmware.hex system_tb.v system.v ../../picorv32.v
+	$(VLOG) -o system_tb system_tb.v system.v ../../picorv32.v
+	./system_tb
 
 firmware.hex: firmware.S firmware.c firmware.lds
 	$(TOOLCHAIN_PREFIX)gcc -Os -m32 -ffreestanding -nostdlib -o firmware.elf firmware.S firmware.c \
@@ -59,7 +57,6 @@ table.txt:
 	bash table.sh > table.txt
 
 clean:
-	rm -rf .Xil/ firmware.bin firmware.elf firmware.hex firmware.map synth_*.log
+	rm -rf firmware.bin firmware.elf firmware.hex firmware.map synth_*.log
 	rm -rf synth_*.mmi synth_*.bit synth_system.v table.txt tab_*/ webtalk.jou
-	rm -rf webtalk.log webtalk_*.jou webtalk_*.log xelab.* xsim[._]* xvlog.*
 
-- 
cgit 


From 71a46afa791a642bd8de012f1c0b236d6066ab05 Mon Sep 17 00:00:00 2001
From: Tom Verbeure <tom_verbeure@yahoo.com>
Date: Mon, 29 Aug 2016 22:14:39 -0700
Subject: Checkpoint: map, fit

---
 scripts/quartus/Makefile   |  6 +-----
 scripts/quartus/tabtest.sh | 50 +++++++++++++++++-----------------------------
 2 files changed, 19 insertions(+), 37 deletions(-)

(limited to 'scripts')

diff --git a/scripts/quartus/Makefile b/scripts/quartus/Makefile
index 7af582f..ab9357a 100644
--- a/scripts/quartus/Makefile
+++ b/scripts/quartus/Makefile
@@ -47,11 +47,7 @@ tab_%/results.txt:
 area: synth_area_small synth_area_regular synth_area_large
 	-grep -B4 -A10 'Slice LUTs' synth_area_small.log synth_area_regular.log synth_area_large.log
 
-table.txt: tab_small_xc7a_1/results.txt tab_small_xc7a_2/results.txt tab_small_xc7a_3/results.txt
-table.txt: tab_small_xc7k_1/results.txt tab_small_xc7k_2/results.txt tab_small_xc7k_3/results.txt
-table.txt: tab_small_xc7v_1/results.txt tab_small_xc7v_2/results.txt tab_small_xc7v_3/results.txt
-table.txt: tab_small_xcku_1/results.txt tab_small_xcku_2/results.txt tab_small_xcku_3/results.txt
-table.txt: tab_small_xcvu_1/results.txt tab_small_xcvu_2/results.txt tab_small_xcvu_3/results.txt
+table.txt: tab_small_ep4ce_c7/results.txt
 
 table.txt:
 	bash table.sh > table.txt
diff --git a/scripts/quartus/tabtest.sh b/scripts/quartus/tabtest.sh
index fa43fc3..2695368 100644
--- a/scripts/quartus/tabtest.sh
+++ b/scripts/quartus/tabtest.sh
@@ -18,46 +18,32 @@ synth_case() {
 	fi
 
 	case "${dev}" in
-		xc7a) xl_device="xc7a15t-fgg484-${grade}" ;;
-		xc7k) xl_device="xc7k70t-fbg676-${grade}" ;;
-		xc7v) xl_device="xc7v585t-ffg1761-${grade}" ;;
-		xcku) xl_device="xcku035-fbva676-${grade}" ;;
-		xcvu) xl_device="xcvu065-ffvc1517-${grade}" ;;
+		ep4ce) al_device="ep4ce30f23${grade}" ;;
 	esac
 
-	case "${dev}-${grade}" in
-		xcku-1) xl_device="${xl_device}-c" ;;
-		xcvu-1) xl_device="${xl_device}-i" ;;
-		xcku-?|xcvu-?) xl_device="${xl_device}-e" ;;
-	esac
-
-	cat > test_${1}.tcl <<- EOT
-		read_verilog ../tabtest.v
-		read_verilog ../../../picorv32.v
-		read_xdc test_${1}.xdc
-		synth_design -flatten_hierarchy full -part ${xl_device} -top top
-		opt_design -sweep -remap -propconst
-		opt_design -directive Explore
-		place_design -directive Explore
-		phys_opt_design -retime -rewire -critical_pin_opt -placement_opt -critical_cell_opt
-		route_design -directive Explore
-		place_design -post_place_opt
-		phys_opt_design -retime
-		route_design -directive NoTimingRelaxation
-		report_utilization
-		report_timing
+	cat > test_${1}.qsf <<- EOT
+set_global_assignment -name DEVICE ${al_device}
+set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output_files
+set_global_assignment -name TOP_LEVEL_ENTITY top
+set_global_assignment -name VERILOG_FILE ../tabtest.v
+set_global_assignment -name VERILOG_FILE ../../../picorv32.v
+set_global_assignment -name SDC_FILE test_${1}.sdc
 	EOT
 
-	cat > test_${1}.xdc <<- EOT
+	cat > test_${1}.sdc <<- EOT
 		create_clock -period ${speed%?}.${speed#?} [get_ports clk]
 	EOT
 
 	echo "Running tab_${ip}_${dev}_${grade}/test_${1}.."
-	if ! $VIVADO -nojournal -log test_${1}.log -mode batch -source test_${1}.tcl > /dev/null 2>&1; then
-		cat test_${1}.log
-		exit 1
-	fi
-	mv test_${1}.log test_${1}.txt
+     
+    quartus_map test_${1}
+    quartus_fit --read_settings_files=off --write_settings_files=off test_${1} -c test_${1}
+        
+#	if ! $VIVADO -nojournal -log test_${1}.log -mode batch -source test_${1}.tcl > /dev/null 2>&1; then
+#		cat test_${1}.log
+#		exit 1
+#	fi
+#	mv test_${1}.log test_${1}.txt
 }
 
 countdown=2
-- 
cgit 


From 248560c18d32bb11d73a9ecfb448581af6930c0c Mon Sep 17 00:00:00 2001
From: Tom Verbeure <tom_verbeure@yahoo.com>
Date: Mon, 29 Aug 2016 23:22:53 -0700
Subject: table.txt generation works

---
 scripts/quartus/Makefile   |  2 ++
 scripts/quartus/table.sh   |  8 +++-----
 scripts/quartus/tabtest.sh | 44 ++++++++++++++++++++++----------------------
 3 files changed, 27 insertions(+), 27 deletions(-)

(limited to 'scripts')

diff --git a/scripts/quartus/Makefile b/scripts/quartus/Makefile
index ab9357a..31f26cd 100644
--- a/scripts/quartus/Makefile
+++ b/scripts/quartus/Makefile
@@ -48,6 +48,8 @@ area: synth_area_small synth_area_regular synth_area_large
 	-grep -B4 -A10 'Slice LUTs' synth_area_small.log synth_area_regular.log synth_area_large.log
 
 table.txt: tab_small_ep4ce_c7/results.txt
+table.txt: tab_small_ep4cgx_c7/results.txt
+table.txt: tab_small_5cgx_c7/results.txt
 
 table.txt:
 	bash table.sh > table.txt
diff --git a/scripts/quartus/table.sh b/scripts/quartus/table.sh
index f81f586..f5e6efe 100644
--- a/scripts/quartus/table.sh
+++ b/scripts/quartus/table.sh
@@ -8,11 +8,9 @@ for x in $( grep -H . tab_*/results.txt )
 do
 	read _ size device grade _ speed < <( echo "$x" | tr _/: ' ' )
 	case "$device" in
-		xc7a) d="Xilinx Artix-7T" ;;
-		xc7k) d="Xilinx Kintex-7T" ;;
-		xc7v) d="Xilinx Virtex-7T" ;;
-		xcku) d="Xilinx Kintex UltraScale" ;;
-		xcvu) d="Xilinx Virtex UltraScale" ;;
+		ep4ce)  d="Altera Cyclone IV E" ;;
+		ep4cgx) d="Altera Cyclone IV GX" ;;
+		5cgx)   d="Altera Cyclone V GX" ;;
 	esac
 	speedtxt=$( printf '%s.%s ns (%d MHz)' ${speed%?} ${speed#?} $((10000 / speed)) )
 	printf '| %-25s | %-10s | %20s |\n' "$d" "-$grade" "$speedtxt"
diff --git a/scripts/quartus/tabtest.sh b/scripts/quartus/tabtest.sh
index 2695368..ad8cf10 100644
--- a/scripts/quartus/tabtest.sh
+++ b/scripts/quartus/tabtest.sh
@@ -7,9 +7,9 @@ read _ ip dev grade _ < <( echo $* | tr '_/' ' '; )
 mkdir -p tab_${ip}_${dev}_${grade}
 cd tab_${ip}_${dev}_${grade}
 
+max_speed=99
+min_speed=01
 best_speed=99
-speed=30
-step=16
 
 synth_case() {
 	if [ -f test_${1}.txt ]; then
@@ -18,7 +18,9 @@ synth_case() {
 	fi
 
 	case "${dev}" in
-		ep4ce) al_device="ep4ce30f23${grade}" ;;
+		ep4ce)  al_device="ep4ce30f23${grade}" ;;
+		ep4cgx) al_device="ep4cgx50df27${grade}" ;;
+		5cgx)   al_device="5cgxbc9c6f23${grade}" ;;
 	esac
 
 	cat > test_${1}.qsf <<- EOT
@@ -36,39 +38,37 @@ set_global_assignment -name SDC_FILE test_${1}.sdc
 
 	echo "Running tab_${ip}_${dev}_${grade}/test_${1}.."
      
-    quartus_map test_${1}
-    quartus_fit --read_settings_files=off --write_settings_files=off test_${1} -c test_${1}
+    if ! quartus_map test_${1}; then
+        exit 1
+    fi
+    if ! quartus_fit --read_settings_files=off --write_settings_files=off test_${1} -c test_${1}; then
+        exit 1
+    fi
+    if ! quartus_sta test_${1} -c test_${1}; then
+        exit 1
+    fi
         
-#	if ! $VIVADO -nojournal -log test_${1}.log -mode batch -source test_${1}.tcl > /dev/null 2>&1; then
-#		cat test_${1}.log
-#		exit 1
-#	fi
-#	mv test_${1}.log test_${1}.txt
+	cp output_files/test_${1}.sta.summary test_${1}.txt
 }
 
-countdown=2
+countdown=6
 while [ $countdown -gt 0 ]; do
+    speed=$(((max_speed+min_speed)/2))
 	synth_case $speed
 
-	if grep -q '^Slack.*(VIOLATED)' test_${speed}.txt; then
+    if grep -q '^Slack : -' test_${speed}.txt; then
 		echo "        tab_${ip}_${dev}_${grade}/test_${speed} VIOLATED"
-		[ $speed -eq 38 ] || step=$((step / 2))
-		speed=$((speed + step))
-	elif grep -q '^Slack.*(MET)' test_${speed}.txt; then
+        min_speed=$((speed))
+    elif grep -q '^Slack : [^-]' test_${speed}.txt; then
 		echo "        tab_${ip}_${dev}_${grade}/test_${speed} MET"
 		[ $speed -lt $best_speed ] && best_speed=$speed
-		step=$((step / 2))
-		speed=$((speed - step))
+        max_speed=$((speed))
 	else
 		echo "ERROR: No slack line found in $PWD/test_${speed}.txt!"
 		exit 1
 	fi
 
-	if [ $step -eq 0 ]; then
-		countdown=$((countdown - 1))
-		speed=$((best_speed - 2))
-		step=1
-	fi
+    countdown=$((countdown-1))
 done
 
 echo "-----------------------"
-- 
cgit 


From 413a65e39a77d11ed7a54ccf46fd8e6e9f3baf62 Mon Sep 17 00:00:00 2001
From: Tom Verbeure <tom_verbeure@yahoo.com>
Date: Tue, 30 Aug 2016 08:08:10 -0700
Subject: Increase countdown by 1

---
 scripts/quartus/tabtest.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'scripts')

diff --git a/scripts/quartus/tabtest.sh b/scripts/quartus/tabtest.sh
index ad8cf10..2fee520 100644
--- a/scripts/quartus/tabtest.sh
+++ b/scripts/quartus/tabtest.sh
@@ -51,7 +51,7 @@ set_global_assignment -name SDC_FILE test_${1}.sdc
 	cp output_files/test_${1}.sta.summary test_${1}.txt
 }
 
-countdown=6
+countdown=7
 while [ $countdown -gt 0 ]; do
     speed=$(((max_speed+min_speed)/2))
 	synth_case $speed
-- 
cgit 


From 29e90e4dff906f4cb5dedad78278cd07dd950060 Mon Sep 17 00:00:00 2001
From: Tom Verbeure <tom_verbeure@yahoo.com>
Date: Tue, 30 Aug 2016 22:23:50 -0700
Subject: Add QUARTUS_BIN prefix

---
 scripts/quartus/tabtest.sh | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'scripts')

diff --git a/scripts/quartus/tabtest.sh b/scripts/quartus/tabtest.sh
index 2fee520..d731f76 100644
--- a/scripts/quartus/tabtest.sh
+++ b/scripts/quartus/tabtest.sh
@@ -38,13 +38,13 @@ set_global_assignment -name SDC_FILE test_${1}.sdc
 
 	echo "Running tab_${ip}_${dev}_${grade}/test_${1}.."
      
-    if ! quartus_map test_${1}; then
+    if ! $QUARTUS_BIN/quartus_map test_${1}; then
         exit 1
     fi
-    if ! quartus_fit --read_settings_files=off --write_settings_files=off test_${1} -c test_${1}; then
+    if ! $QUARTUS_BIN/quartus_fit --read_settings_files=off --write_settings_files=off test_${1} -c test_${1}; then
         exit 1
     fi
-    if ! quartus_sta test_${1} -c test_${1}; then
+    if ! $QUARTUS_BIN/quartus_sta test_${1} -c test_${1}; then
         exit 1
     fi
         
-- 
cgit 


From 36152a568873864e9c980b9c62d73969f3900238 Mon Sep 17 00:00:00 2001
From: Tom Verbeure <tom_verbeure@yahoo.com>
Date: Tue, 30 Aug 2016 22:24:48 -0700
Subject: Make synth_area_small work

---
 scripts/quartus/Makefile             | 19 ++++++++++---------
 scripts/quartus/synth_area.sdc       |  1 +
 scripts/quartus/synth_area.xdc       |  1 -
 scripts/quartus/synth_area_small.qsf |  6 ++++++
 scripts/quartus/synth_area_small.tcl | 10 ----------
 scripts/quartus/synth_speed.xdc      |  1 -
 6 files changed, 17 insertions(+), 21 deletions(-)
 create mode 100644 scripts/quartus/synth_area.sdc
 delete mode 100644 scripts/quartus/synth_area.xdc
 create mode 100644 scripts/quartus/synth_area_small.qsf
 delete mode 100644 scripts/quartus/synth_area_small.tcl
 delete mode 100644 scripts/quartus/synth_speed.xdc

(limited to 'scripts')

diff --git a/scripts/quartus/Makefile b/scripts/quartus/Makefile
index 31f26cd..49be1ca 100644
--- a/scripts/quartus/Makefile
+++ b/scripts/quartus/Makefile
@@ -1,12 +1,10 @@
 
-QUARTUS_ROOTDIR = /opt/altera_lite/16.0
-QUARTUS_BIN = $(QUARTUS_ROOTDIR)/quartus/bin
+export QUARTUS_ROOTDIR = /opt/altera_lite/16.0
+export QUARTUS_BIN = $(QUARTUS_ROOTDIR)/quartus/bin
 
 VLOG = iverilog
 TOOLCHAIN_PREFIX = /opt/riscv32i/bin/riscv32-unknown-elf-
 
-export VIVADO
-
 help:
 	@echo ""
 	@echo "Simple synthesis tests:"
@@ -24,10 +22,13 @@ help:
 
 synth_%:
 	rm -f $@.log
-	$(VIVADO) -nojournal -log $@.log -mode batch -source $@.tcl
-	rm -rf .Xil fsm_encoding.os synth_*.backup.log usage_statistics_webtalk.*
-	-grep -B4 -A10 'Slice LUTs' $@.log
-	-grep -B1 -A9 ^Slack $@.log && echo
+	mkdir -p $@_build
+	cp $@.qsf $@_build
+	cd $@_build && $(QUARTUS_BIN)/quartus_map $@.qsf
+	cd $@_build && $(QUARTUS_BIN)/quartus_fit --read_settings_files=off -write_settings_files=off $@ -c $@
+	cd $@_build && $(QUARTUS_BIN)/quartus_sta $@ -c $@
+	-cd $@_build && grep -A3 "Total logic elements" output_files/$@.fit.summary
+	-cd $@_build && grep -B1 "Slack" output_files/$@.sta.summary
 
 synth_system: firmware.hex
 
@@ -56,5 +57,5 @@ table.txt:
 
 clean:
 	rm -rf firmware.bin firmware.elf firmware.hex firmware.map synth_*.log
-	rm -rf synth_*.mmi synth_*.bit synth_system.v table.txt tab_*/ webtalk.jou
+	rm -rf synth_*.mmi synth_*.bit synth_system.v table.txt tab_*/ 
 
diff --git a/scripts/quartus/synth_area.sdc b/scripts/quartus/synth_area.sdc
new file mode 100644
index 0000000..3c3d5a1
--- /dev/null
+++ b/scripts/quartus/synth_area.sdc
@@ -0,0 +1 @@
+create_clock -period 20.00 [get_ports clk]
diff --git a/scripts/quartus/synth_area.xdc b/scripts/quartus/synth_area.xdc
deleted file mode 100644
index 3c3d5a1..0000000
--- a/scripts/quartus/synth_area.xdc
+++ /dev/null
@@ -1 +0,0 @@
-create_clock -period 20.00 [get_ports clk]
diff --git a/scripts/quartus/synth_area_small.qsf b/scripts/quartus/synth_area_small.qsf
new file mode 100644
index 0000000..7f151a8
--- /dev/null
+++ b/scripts/quartus/synth_area_small.qsf
@@ -0,0 +1,6 @@
+set_global_assignment -name DEVICE ep4ce30f23c7
+set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output_files
+set_global_assignment -name TOP_LEVEL_ENTITY top_small
+set_global_assignment -name VERILOG_FILE ../synth_area_top.v
+set_global_assignment -name VERILOG_FILE ../../../picorv32.v
+set_global_assignment -name SDC_FILE ../synth_area.sdc
diff --git a/scripts/quartus/synth_area_small.tcl b/scripts/quartus/synth_area_small.tcl
deleted file mode 100644
index 11d2104..0000000
--- a/scripts/quartus/synth_area_small.tcl
+++ /dev/null
@@ -1,10 +0,0 @@
-read_verilog ../../picorv32.v
-read_verilog synth_area_top.v
-read_xdc synth_area.xdc
-
-synth_design -part xc7k70t-fbg676 -top top_small
-opt_design -sweep -propconst -resynth_seq_area
-opt_design -directive ExploreSequentialArea
-
-report_utilization
-report_timing
diff --git a/scripts/quartus/synth_speed.xdc b/scripts/quartus/synth_speed.xdc
deleted file mode 100644
index 877ec8d..0000000
--- a/scripts/quartus/synth_speed.xdc
+++ /dev/null
@@ -1 +0,0 @@
-create_clock -period 2.50 [get_ports clk]
-- 
cgit 


From 209456a6c88c9460625c7fa7903f9561ba2005ad Mon Sep 17 00:00:00 2001
From: Tom Verbeure <tom_verbeure@yahoo.com>
Date: Tue, 30 Aug 2016 22:36:06 -0700
Subject: synth_area_large and synth_area_regular

---
 scripts/quartus/Makefile               |  3 ++-
 scripts/quartus/synth_area_large.qsf   |  6 ++++++
 scripts/quartus/synth_area_large.tcl   | 10 ----------
 scripts/quartus/synth_area_regular.qsf |  6 ++++++
 scripts/quartus/synth_area_regular.tcl | 10 ----------
 scripts/quartus/synth_area_small.qsf   |  2 +-
 6 files changed, 15 insertions(+), 22 deletions(-)
 create mode 100644 scripts/quartus/synth_area_large.qsf
 delete mode 100644 scripts/quartus/synth_area_large.tcl
 create mode 100644 scripts/quartus/synth_area_regular.qsf
 delete mode 100644 scripts/quartus/synth_area_regular.tcl

(limited to 'scripts')

diff --git a/scripts/quartus/Makefile b/scripts/quartus/Makefile
index 49be1ca..318f7b3 100644
--- a/scripts/quartus/Makefile
+++ b/scripts/quartus/Makefile
@@ -57,5 +57,6 @@ table.txt:
 
 clean:
 	rm -rf firmware.bin firmware.elf firmware.hex firmware.map synth_*.log
-	rm -rf synth_*.mmi synth_*.bit synth_system.v table.txt tab_*/ 
+	rm -rf synth_system.v table.txt tab_*/ 
+	rm -rf synth_area_*_build
 
diff --git a/scripts/quartus/synth_area_large.qsf b/scripts/quartus/synth_area_large.qsf
new file mode 100644
index 0000000..c09700b
--- /dev/null
+++ b/scripts/quartus/synth_area_large.qsf
@@ -0,0 +1,6 @@
+set_global_assignment -name DEVICE ep4ce40f29c7
+set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output_files
+set_global_assignment -name TOP_LEVEL_ENTITY top_large
+set_global_assignment -name VERILOG_FILE ../synth_area_top.v
+set_global_assignment -name VERILOG_FILE ../../../picorv32.v
+set_global_assignment -name SDC_FILE ../synth_area.sdc
diff --git a/scripts/quartus/synth_area_large.tcl b/scripts/quartus/synth_area_large.tcl
deleted file mode 100644
index af611b5..0000000
--- a/scripts/quartus/synth_area_large.tcl
+++ /dev/null
@@ -1,10 +0,0 @@
-read_verilog ../../picorv32.v
-read_verilog synth_area_top.v
-read_xdc synth_area.xdc
-
-synth_design -part xc7k70t-fbg676 -top top_large
-opt_design -sweep -propconst -resynth_seq_area
-opt_design -directive ExploreSequentialArea
-
-report_utilization
-report_timing
diff --git a/scripts/quartus/synth_area_regular.qsf b/scripts/quartus/synth_area_regular.qsf
new file mode 100644
index 0000000..8507413
--- /dev/null
+++ b/scripts/quartus/synth_area_regular.qsf
@@ -0,0 +1,6 @@
+set_global_assignment -name DEVICE ep4ce40f29c7
+set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output_files
+set_global_assignment -name TOP_LEVEL_ENTITY top_regular
+set_global_assignment -name VERILOG_FILE ../synth_area_top.v
+set_global_assignment -name VERILOG_FILE ../../../picorv32.v
+set_global_assignment -name SDC_FILE ../synth_area.sdc
diff --git a/scripts/quartus/synth_area_regular.tcl b/scripts/quartus/synth_area_regular.tcl
deleted file mode 100644
index 2bf6b4c..0000000
--- a/scripts/quartus/synth_area_regular.tcl
+++ /dev/null
@@ -1,10 +0,0 @@
-read_verilog ../../picorv32.v
-read_verilog synth_area_top.v
-read_xdc synth_area.xdc
-
-synth_design -part xc7k70t-fbg676 -top top_regular
-opt_design -sweep -propconst -resynth_seq_area
-opt_design -directive ExploreSequentialArea
-
-report_utilization
-report_timing
diff --git a/scripts/quartus/synth_area_small.qsf b/scripts/quartus/synth_area_small.qsf
index 7f151a8..048ff96 100644
--- a/scripts/quartus/synth_area_small.qsf
+++ b/scripts/quartus/synth_area_small.qsf
@@ -1,4 +1,4 @@
-set_global_assignment -name DEVICE ep4ce30f23c7
+set_global_assignment -name DEVICE ep4ce40f29c7
 set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output_files
 set_global_assignment -name TOP_LEVEL_ENTITY top_small
 set_global_assignment -name VERILOG_FILE ../synth_area_top.v
-- 
cgit 


From e7f5d640cab596410cb21bab0ac7bc49c3ad87b7 Mon Sep 17 00:00:00 2001
From: Tom Verbeure <tom_verbeure@yahoo.com>
Date: Tue, 30 Aug 2016 22:54:14 -0700
Subject: synth_system

---
 scripts/quartus/Makefile         |  2 +-
 scripts/quartus/synth_system.qsf |  6 ++++++
 scripts/quartus/synth_system.sdc |  1 +
 scripts/quartus/synth_system.xdc | 34 ----------------------------------
 scripts/quartus/system.v         |  2 +-
 5 files changed, 9 insertions(+), 36 deletions(-)
 create mode 100644 scripts/quartus/synth_system.qsf
 create mode 100644 scripts/quartus/synth_system.sdc
 delete mode 100644 scripts/quartus/synth_system.xdc

(limited to 'scripts')

diff --git a/scripts/quartus/Makefile b/scripts/quartus/Makefile
index 318f7b3..f626fc5 100644
--- a/scripts/quartus/Makefile
+++ b/scripts/quartus/Makefile
@@ -46,7 +46,7 @@ tab_%/results.txt:
 	bash tabtest.sh $@
 
 area: synth_area_small synth_area_regular synth_area_large
-	-grep -B4 -A10 'Slice LUTs' synth_area_small.log synth_area_regular.log synth_area_large.log
+	-grep -A3 "Total logic elements" synth_area_*_build/output_files/synth_area_*.fit.summary
 
 table.txt: tab_small_ep4ce_c7/results.txt
 table.txt: tab_small_ep4cgx_c7/results.txt
diff --git a/scripts/quartus/synth_system.qsf b/scripts/quartus/synth_system.qsf
new file mode 100644
index 0000000..1a84293
--- /dev/null
+++ b/scripts/quartus/synth_system.qsf
@@ -0,0 +1,6 @@
+set_global_assignment -name DEVICE ep4ce40f29c7
+set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output_files
+set_global_assignment -name TOP_LEVEL_ENTITY system
+set_global_assignment -name VERILOG_FILE ../system.v
+set_global_assignment -name VERILOG_FILE ../../../picorv32.v
+set_global_assignment -name SDC_FILE ../synth_system.sdc
diff --git a/scripts/quartus/synth_system.sdc b/scripts/quartus/synth_system.sdc
new file mode 100644
index 0000000..90ee3a2
--- /dev/null
+++ b/scripts/quartus/synth_system.sdc
@@ -0,0 +1 @@
+create_clock -period 10.00 [get_ports clk]
diff --git a/scripts/quartus/synth_system.xdc b/scripts/quartus/synth_system.xdc
deleted file mode 100644
index 5748466..0000000
--- a/scripts/quartus/synth_system.xdc
+++ /dev/null
@@ -1,34 +0,0 @@
-
-# XDC File for Basys3 Board
-###########################
-
-set_property PACKAGE_PIN W5 [get_ports clk]
-set_property IOSTANDARD LVCMOS33 [get_ports clk]
-create_clock -period 10.00 [get_ports clk]
-
-# Pmod Header JA (JA0..JA7)
-set_property PACKAGE_PIN J1 [get_ports {out_byte[0]}]
-set_property IOSTANDARD LVCMOS33 [get_ports {out_byte[0]}]
-set_property PACKAGE_PIN L2 [get_ports {out_byte[1]}]
-set_property IOSTANDARD LVCMOS33 [get_ports {out_byte[1]}]
-set_property PACKAGE_PIN J2 [get_ports {out_byte[2]}]
-set_property IOSTANDARD LVCMOS33 [get_ports {out_byte[2]}]
-set_property PACKAGE_PIN G2 [get_ports {out_byte[3]}]
-set_property IOSTANDARD LVCMOS33 [get_ports {out_byte[3]}]
-set_property PACKAGE_PIN H1 [get_ports {out_byte[4]}]
-set_property IOSTANDARD LVCMOS33 [get_ports {out_byte[4]}]
-set_property PACKAGE_PIN K2 [get_ports {out_byte[5]}]
-set_property IOSTANDARD LVCMOS33 [get_ports {out_byte[5]}]
-set_property PACKAGE_PIN H2 [get_ports {out_byte[6]}]
-set_property IOSTANDARD LVCMOS33 [get_ports {out_byte[6]}]
-set_property PACKAGE_PIN G3 [get_ports {out_byte[7]}]
-set_property IOSTANDARD LVCMOS33 [get_ports {out_byte[7]}]
-
-# Pmod Header JB (JB0..JB2)
-set_property PACKAGE_PIN A14 [get_ports {resetn}]
-set_property IOSTANDARD LVCMOS33 [get_ports {resetn}]
-set_property PACKAGE_PIN A16 [get_ports {trap}]
-set_property IOSTANDARD LVCMOS33 [get_ports {trap}]
-set_property PACKAGE_PIN B15 [get_ports {out_byte_en}]
-set_property IOSTANDARD LVCMOS33 [get_ports {out_byte_en}]
-
diff --git a/scripts/quartus/system.v b/scripts/quartus/system.v
index c4882a1..19a4b8d 100644
--- a/scripts/quartus/system.v
+++ b/scripts/quartus/system.v
@@ -8,7 +8,7 @@ module system (
 	output reg       out_byte_en
 );
 	// set this to 0 for better timing but less performance/MHz
-	parameter FAST_MEMORY = 1;
+	parameter FAST_MEMORY = 0;
 
 	// 4096 32bit words = 16kB memory
 	parameter MEM_SIZE = 4096;
-- 
cgit 


From 91deccd3a18ad6edcb793424f7c56f2f724d4b3f Mon Sep 17 00:00:00 2001
From: Tom Verbeure <tom_verbeure@yahoo.com>
Date: Tue, 30 Aug 2016 22:56:31 -0700
Subject: Don't delete non-existing files

---
 scripts/quartus/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'scripts')

diff --git a/scripts/quartus/Makefile b/scripts/quartus/Makefile
index f626fc5..8b994e0 100644
--- a/scripts/quartus/Makefile
+++ b/scripts/quartus/Makefile
@@ -57,6 +57,6 @@ table.txt:
 
 clean:
 	rm -rf firmware.bin firmware.elf firmware.hex firmware.map synth_*.log
-	rm -rf synth_system.v table.txt tab_*/ 
-	rm -rf synth_area_*_build
+	rm -rf table.txt tab_*/
+	rm -rf synth_*_build
 
-- 
cgit 


From 41918ee26533daaf2b22dbbf79656cfad914b3f3 Mon Sep 17 00:00:00 2001
From: Tom Verbeure <tom_verbeure@yahoo.com>
Date: Tue, 30 Aug 2016 23:02:31 -0700
Subject: synth_speed

---
 scripts/quartus/synth_speed.qsf |  5 +++++
 scripts/quartus/synth_speed.sdc |  1 +
 scripts/quartus/synth_speed.tcl | 13 -------------
 3 files changed, 6 insertions(+), 13 deletions(-)
 create mode 100644 scripts/quartus/synth_speed.qsf
 create mode 100644 scripts/quartus/synth_speed.sdc
 delete mode 100644 scripts/quartus/synth_speed.tcl

(limited to 'scripts')

diff --git a/scripts/quartus/synth_speed.qsf b/scripts/quartus/synth_speed.qsf
new file mode 100644
index 0000000..64490d4
--- /dev/null
+++ b/scripts/quartus/synth_speed.qsf
@@ -0,0 +1,5 @@
+set_global_assignment -name DEVICE ep4ce40f29c7
+set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output_files
+set_global_assignment -name TOP_LEVEL_ENTITY picorv32_axi
+set_global_assignment -name VERILOG_FILE ../../../picorv32.v
+set_global_assignment -name SDC_FILE ../synth_speed.sdc
diff --git a/scripts/quartus/synth_speed.sdc b/scripts/quartus/synth_speed.sdc
new file mode 100644
index 0000000..fef5704
--- /dev/null
+++ b/scripts/quartus/synth_speed.sdc
@@ -0,0 +1 @@
+create_clock -period 2.5 [get_ports clk]
diff --git a/scripts/quartus/synth_speed.tcl b/scripts/quartus/synth_speed.tcl
deleted file mode 100644
index f3874e4..0000000
--- a/scripts/quartus/synth_speed.tcl
+++ /dev/null
@@ -1,13 +0,0 @@
-
-read_verilog ../../picorv32.v
-read_xdc synth_speed.xdc
-
-synth_design -part xc7k70t-fbg676 -top picorv32_axi
-opt_design
-place_design
-phys_opt_design
-route_design
-
-report_utilization
-report_timing
-
-- 
cgit 


From 35b0a592e20f04b1f8954af06d019c351cbb3d20 Mon Sep 17 00:00:00 2001
From: Tom Verbeure <tom_verbeure@yahoo.com>
Date: Wed, 31 Aug 2016 07:36:32 -0700
Subject: Delete unusused file

---
 scripts/quartus/synth_area.tcl | 8 --------
 1 file changed, 8 deletions(-)
 delete mode 100644 scripts/quartus/synth_area.tcl

(limited to 'scripts')

diff --git a/scripts/quartus/synth_area.tcl b/scripts/quartus/synth_area.tcl
deleted file mode 100644
index c222a00..0000000
--- a/scripts/quartus/synth_area.tcl
+++ /dev/null
@@ -1,8 +0,0 @@
-read_verilog ../../picorv32.v
-read_xdc synth_area.xdc
-
-synth_design -part xc7k70t-fbg676 -top picorv32_axi
-opt_design -resynth_seq_area
-
-report_utilization
-report_timing
-- 
cgit