Adding polybar config

1 files changed, 227 insertions, 0 deletions

diff --git a/polybar/config b/polybar/config
new file mode 100644
index 0000000..aa6b581
--- /dev/null
+++ b/polybar/config
@@ -0,0 +1,227 @@
+[bar/mybar]
+; Use the following command to list available outputs:
+; If unspecified, the application will pick the first one it finds.
+; $ xrandr -q | grep " connected" | cut -d ' ' -f1
+monitor =
+
+; Use the specified monitor as a fallback if the main one is not found.
+monitor-fallback =
+
+; Require the monitor to be in connected state
+; XRandR sometimes report my monitor as being disconnected (when in use)
+monitor-strict = false
+
+; Tell the Window Manager not to configure the window.
+; Use this to detach the bar if your WM is locking its size/position.
+override-redirect = false
+
+; Put the bar at the bottom of the screen
+bottom = false
+
+; Prefer fixed center position for the `modules-center` block
+; When false, the center position will be based on the size of the other blocks.
+fixed-center = true
+
+; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%),
+; the percentage can optionally be extended with a pixel offset like so:
+; 50%:-10, this will result in a width or height of 50% minus 10 pixels
+width = 100%
+height = 100
+
+; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
+; the percentage can optionally be extended with a pixel offset like so:
+; 50%:-10, this will result in an offset in the x or y direction 
+; of 50% minus 10 pixels
+offset-x = 0
+offset-y = 0
+
+; Background argb color (e.g. #f00, #ff992a, #ddff1023)
+background = #fff
+
+; Foreground argb color (e.g. #f00, #ff992a, #ddff1023)
+foreground = #000
+
+; Background gradient (vertical steps)
+;   background-[0-9]+ = #aarrggbb
+background-0 = 
+
+; Value used for drawing rounded corners
+; Individual top/bottom values can be defined using:
+;   radius-{top,bottom}
+radius = 0.0
+
+; Under-/overline pixel size and argb color
+; Individual values can be defined using:
+;   {overline,underline}-size
+;   {overline,underline}-color
+line-size = 1
+line-color = #f00
+
+; Values applied to all borders
+; Individual side values can be defined using:
+;   border-{left,top,right,bottom}-size
+;   border-{left,top,right,bottom}-color
+border-size =
+border-color =
+
+; Number of spaces to add at the beginning/end of the bar
+; Individual side values can be defined using:
+;   padding-{left,right}
+padding = 0
+
+; Number of spaces to add before/after each module
+; Individual side values can be defined using:
+;   module-margin-{left,right}
+module-margin = 0
+
+; Fonts are defined using <font-name>;<vertical-offset>
+; Font names are specified using a fontconfig pattern.
+;   font-0 = NotoSans-Regular:size=8;2
+;   font-1 = MaterialIcons:size=10
+;   font-2 = Termsynu:size=8;-1
+;   font-3 = FontAwesome:size=10
+; See the Fonts wiki page for more details
+font-0 =
+
+; Modules are added to one of the available blocks
+;   modules-left = cpu ram
+;   modules-center = xwindow xbacklight
+;   modules-right = ipc clock
+modules-left = i3
+modules-center =
+modules-right =
+
+; The separator will be inserted between the output of each module
+separator =
+
+; This value is used to add extra spacing between elements
+; @deprecated: This parameter will be removed in an upcoming version
+spacing = 0
+
+; Opacity value between 0.0 and 1.0 used on fade in/out
+dim-value = 1.0
+
+; Value to be used to set the WM_NAME atom
+; If the value is empty or undefined, the atom value
+; will be created from the following template: polybar-[BAR]_[MONITOR]
+; NOTE: The placeholders are not available for custom values
+wm-name =
+
+; Locale used to localize various module data (e.g. date)
+; Expects a valid libc locale, for example: sv_SE.UTF-8
+locale = 
+
+; Position of the system tray window
+; If empty or undefined, tray support will be disabled
+; NOTE: A center aligned tray will cover center aligned modules
+;
+; Available positions:
+;   left
+;   center
+;   right
+tray-position = center
+
+; If true, the bar will not shift its
+; contents when the tray changes
+tray-detached = false
+
+; Tray icon max size
+tray-maxsize = 16
+
+; Enable pseudo transparency
+; Will automatically be enabled if a fully transparent
+; background color is defined using `tray-background`
+tray-transparent = false
+
+; Background color for the tray container
+; By default the tray container will use the bar
+; background color.
+; Note: 32 bit alpha blending is not supported.
+tray-background = ${root.background}
+
+; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
+tray-offset-x = 0
+tray-offset-y = 0
+
+; Pad the sides of each tray icon
+tray-padding = 0
+
+; Scale factor for tray clients
+tray-scale = 1.0
+
+; Restack the bar window and put it above the
+; selected window manager's root
+;
+; Fixes the issue where the bar is being drawn
+; on top of fullscreen window's
+;
+; Currently supported WM's:
+;   bspwm
+;   i3 (requires: `override-redirect = true`)
+wm-restack =
+
+; Enable support for inter-process messaging
+; See the Messaging wiki page for more details.
+enable-ipc = false
+
+; Fallback click handlers that will be called if
+; there's no matching module handler found.
+click-left = 
+click-middle = 
+click-right =
+scroll-up =
+scroll-down =
+double-click-left =
+double-click-middle =
+double-click-right =
+
+; Requires polybar to be built with xcursor support (xcb-util-cursor)
+; Possible values are:
+; - default   : The default pointer as before, can also be an empty string (default)
+; - pointer   : Typically in the form of a hand
+; - ns-resize : Up and down arrows, can be used to indicate scrolling
+cursor-click = 
+cursor-scroll =
+
+[module/i3]
+type = internal/i3
+
+; Only show workspaces defined on the same output as the bar
+;
+; Useful if you want to show monitor specific workspaces
+; on different bars
+;
+; Default: false
+pin-workspaces = true
+
+; This will split the workspace name on ':'
+; Default: false
+strip-wsnumbers = false
+
+; Sort the workspaces by index instead of the default
+; sorting that groups the workspaces by output
+; Default: false
+index-sort = true
+
+; Create click handler used to focus workspace
+; Default: true
+enable-click = false
+
+; Create scroll handlers used to cycle workspaces
+; Default: true
+enable-scroll = false
+
+; Wrap around when reaching the first/last workspace
+; Default: true
+wrapping-scroll = false
+
+; Set the scroll cycle direction 
+; Default: true
+reverse-scroll = false
+
+; Use fuzzy (partial) matching on labels when assigning 
+; icons to workspaces
+; Example: code;♚ will apply the icon to all workspaces 
+; containing 'code' in the label
+; Default: false
+fuzzy-match = true
\ No newline at end of file