Update on Overleaf.

1 files changed, 576 insertions, 0 deletions

diff --git a/bare_conf.tex b/bare_conf.tex
new file mode 100644
index 0000000..6a912c7
--- /dev/null
+++ b/bare_conf.tex
@@ -0,0 +1,576 @@
+
+%% bare_conf.tex
+%% V1.4b
+%% 2015/08/26
+%% by Michael Shell
+%% See:
+%% http://www.michaelshell.org/
+%% for current contact information.
+%%
+%% This is a skeleton file demonstrating the use of IEEEtran.cls
+%% (requires IEEEtran.cls version 1.8b or later) with an IEEE
+%% conference paper.
+%%
+%% Support sites:
+%% http://www.michaelshell.org/tex/ieeetran/
+%% http://www.ctan.org/pkg/ieeetran
+%% and
+%% http://www.ieee.org/
+
+%%*************************************************************************
+%% Legal Notice:
+%% This code is offered as-is without any warranty either expressed or
+%% implied; without even the implied warranty of MERCHANTABILITY or
+%% FITNESS FOR A PARTICULAR PURPOSE! 
+%% User assumes all risk.
+%% In no event shall the IEEE or any contributor to this code be liable for
+%% any damages or losses, including, but not limited to, incidental,
+%% consequential, or any other damages, resulting from the use or misuse
+%% of any information contained here.
+%%
+%% All comments are the opinions of their respective authors and are not
+%% necessarily endorsed by the IEEE.
+%%
+%% This work is distributed under the LaTeX Project Public License (LPPL)
+%% ( http://www.latex-project.org/ ) version 1.3, and may be freely used,
+%% distributed and modified. A copy of the LPPL, version 1.3, is included
+%% in the base LaTeX documentation of all distributions of LaTeX released
+%% 2003/12/01 or later.
+%% Retain all contribution notices and credits.
+%% ** Modified files should be clearly indicated as such, including  **
+%% ** renaming them and changing author support contact information. **
+%%*************************************************************************
+
+
+% *** Authors should verify (and, if needed, correct) their LaTeX system  ***
+% *** with the testflow diagnostic prior to trusting their LaTeX platform ***
+% *** with production work. The IEEE's font choices and paper sizes can   ***
+% *** trigger bugs that do not appear when using other class files.       ***                          ***
+% The testflow support page is at:
+% http://www.michaelshell.org/tex/testflow/
+
+
+
+\documentclass[conference]{IEEEtran}
+% Some Computer Society conferences also require the compsoc mode option,
+% but others use the standard conference format.
+%
+% If IEEEtran.cls has not been installed into the LaTeX system files,
+% manually specify the path to it like:
+% \documentclass[conference]{../sty/IEEEtran}
+
+
+
+
+
+% Some very useful LaTeX packages include:
+% (uncomment the ones you want to load)
+
+
+% *** MISC UTILITY PACKAGES ***
+%
+%\usepackage{ifpdf}
+% Heiko Oberdiek's ifpdf.sty is very useful if you need conditional
+% compilation based on whether the output is pdf or dvi.
+% usage:
+% \ifpdf
+%   % pdf code
+% \else
+%   % dvi code
+% \fi
+% The latest version of ifpdf.sty can be obtained from:
+% http://www.ctan.org/pkg/ifpdf
+% Also, note that IEEEtran.cls V1.7 and later provides a builtin
+% \ifCLASSINFOpdf conditional that works the same way.
+% When switching from latex to pdflatex and vice-versa, the compiler may
+% have to be run twice to clear warning/error messages.
+
+
+
+
+
+
+% *** CITATION PACKAGES ***
+%
+%\usepackage{cite}
+% cite.sty was written by Donald Arseneau
+% V1.6 and later of IEEEtran pre-defines the format of the cite.sty package
+% \cite{} output to follow that of the IEEE. Loading the cite package will
+% result in citation numbers being automatically sorted and properly
+% "compressed/ranged". e.g., [1], [9], [2], [7], [5], [6] without using
+% cite.sty will become [1], [2], [5]--[7], [9] using cite.sty. cite.sty's
+% \cite will automatically add leading space, if needed. Use cite.sty's
+% noadjust option (cite.sty V3.8 and later) if you want to turn this off
+% such as if a citation ever needs to be enclosed in parenthesis.
+% cite.sty is already installed on most LaTeX systems. Be sure and use
+% version 5.0 (2009-03-20) and later if using hyperref.sty.
+% The latest version can be obtained at:
+% http://www.ctan.org/pkg/cite
+% The documentation is contained in the cite.sty file itself.
+
+
+
+
+
+
+% *** GRAPHICS RELATED PACKAGES ***
+%
+\ifCLASSINFOpdf
+  % \usepackage[pdftex]{graphicx}
+  % declare the path(s) where your graphic files are
+  % \graphicspath{{../pdf/}{../jpeg/}}
+  % and their extensions so you won't have to specify these with
+  % every instance of \includegraphics
+  % \DeclareGraphicsExtensions{.pdf,.jpeg,.png}
+\else
+  % or other class option (dvipsone, dvipdf, if not using dvips). graphicx
+  % will default to the driver specified in the system graphics.cfg if no
+  % driver is specified.
+  % \usepackage[dvips]{graphicx}
+  % declare the path(s) where your graphic files are
+  % \graphicspath{{../eps/}}
+  % and their extensions so you won't have to specify these with
+  % every instance of \includegraphics
+  % \DeclareGraphicsExtensions{.eps}
+\fi
+% graphicx was written by David Carlisle and Sebastian Rahtz. It is
+% required if you want graphics, photos, etc. graphicx.sty is already
+% installed on most LaTeX systems. The latest version and documentation
+% can be obtained at: 
+% http://www.ctan.org/pkg/graphicx
+% Another good source of documentation is "Using Imported Graphics in
+% LaTeX2e" by Keith Reckdahl which can be found at:
+% http://www.ctan.org/pkg/epslatex
+%
+% latex, and pdflatex in dvi mode, support graphics in encapsulated
+% postscript (.eps) format. pdflatex in pdf mode supports graphics
+% in .pdf, .jpeg, .png and .mps (metapost) formats. Users should ensure
+% that all non-photo figures use a vector format (.eps, .pdf, .mps) and
+% not a bitmapped formats (.jpeg, .png). The IEEE frowns on bitmapped formats
+% which can result in "jaggedy"/blurry rendering of lines and letters as
+% well as large increases in file sizes.
+%
+% You can find documentation about the pdfTeX application at:
+% http://www.tug.org/applications/pdftex
+
+
+
+
+
+% *** MATH PACKAGES ***
+%
+%\usepackage{amsmath}
+% A popular package from the American Mathematical Society that provides
+% many useful and powerful commands for dealing with mathematics.
+%
+% Note that the amsmath package sets \interdisplaylinepenalty to 10000
+% thus preventing page breaks from occurring within multiline equations. Use:
+%\interdisplaylinepenalty=2500
+% after loading amsmath to restore such page breaks as IEEEtran.cls normally
+% does. amsmath.sty is already installed on most LaTeX systems. The latest
+% version and documentation can be obtained at:
+% http://www.ctan.org/pkg/amsmath
+
+
+
+
+
+% *** SPECIALIZED LIST PACKAGES ***
+%
+%\usepackage{algorithmic}
+% algorithmic.sty was written by Peter Williams and Rogerio Brito.
+% This package provides an algorithmic environment fo describing algorithms.
+% You can use the algorithmic environment in-text or within a figure
+% environment to provide for a floating algorithm. Do NOT use the algorithm
+% floating environment provided by algorithm.sty (by the same authors) or
+% algorithm2e.sty (by Christophe Fiorio) as the IEEE does not use dedicated
+% algorithm float types and packages that provide these will not provide
+% correct IEEE style captions. The latest version and documentation of
+% algorithmic.sty can be obtained at:
+% http://www.ctan.org/pkg/algorithms
+% Also of interest may be the (relatively newer and more customizable)
+% algorithmicx.sty package by Szasz Janos:
+% http://www.ctan.org/pkg/algorithmicx
+
+
+
+
+% *** ALIGNMENT PACKAGES ***
+%
+%\usepackage{array}
+% Frank Mittelbach's and David Carlisle's array.sty patches and improves
+% the standard LaTeX2e array and tabular environments to provide better
+% appearance and additional user controls. As the default LaTeX2e table
+% generation code is lacking to the point of almost being broken with
+% respect to the quality of the end results, all users are strongly
+% advised to use an enhanced (at the very least that provided by array.sty)
+% set of table tools. array.sty is already installed on most systems. The
+% latest version and documentation can be obtained at:
+% http://www.ctan.org/pkg/array
+
+
+% IEEEtran contains the IEEEeqnarray family of commands that can be used to
+% generate multiline equations as well as matrices, tables, etc., of high
+% quality.
+
+
+
+
+% *** SUBFIGURE PACKAGES ***
+%\ifCLASSOPTIONcompsoc
+%  \usepackage[caption=false,font=normalsize,labelfont=sf,textfont=sf]{subfig}
+%\else
+%  \usepackage[caption=false,font=footnotesize]{subfig}
+%\fi
+% subfig.sty, written by Steven Douglas Cochran, is the modern replacement
+% for subfigure.sty, the latter of which is no longer maintained and is
+% incompatible with some LaTeX packages including fixltx2e. However,
+% subfig.sty requires and automatically loads Axel Sommerfeldt's caption.sty
+% which will override IEEEtran.cls' handling of captions and this will result
+% in non-IEEE style figure/table captions. To prevent this problem, be sure
+% and invoke subfig.sty's "caption=false" package option (available since
+% subfig.sty version 1.3, 2005/06/28) as this is will preserve IEEEtran.cls
+% handling of captions.
+% Note that the Computer Society format requires a larger sans serif font
+% than the serif footnote size font used in traditional IEEE formatting
+% and thus the need to invoke different subfig.sty package options depending
+% on whether compsoc mode has been enabled.
+%
+% The latest version and documentation of subfig.sty can be obtained at:
+% http://www.ctan.org/pkg/subfig
+
+
+
+
+% *** FLOAT PACKAGES ***
+%
+%\usepackage{fixltx2e}
+% fixltx2e, the successor to the earlier fix2col.sty, was written by
+% Frank Mittelbach and David Carlisle. This package corrects a few problems
+% in the LaTeX2e kernel, the most notable of which is that in current
+% LaTeX2e releases, the ordering of single and double column floats is not
+% guaranteed to be preserved. Thus, an unpatched LaTeX2e can allow a
+% single column figure to be placed prior to an earlier double column
+% figure.
+% Be aware that LaTeX2e kernels dated 2015 and later have fixltx2e.sty's
+% corrections already built into the system in which case a warning will
+% be issued if an attempt is made to load fixltx2e.sty as it is no longer
+% needed.
+% The latest version and documentation can be found at:
+% http://www.ctan.org/pkg/fixltx2e
+
+
+%\usepackage{stfloats}
+% stfloats.sty was written by Sigitas Tolusis. This package gives LaTeX2e
+% the ability to do double column floats at the bottom of the page as well
+% as the top. (e.g., "\begin{figure*}[!b]" is not normally possible in
+% LaTeX2e). It also provides a command:
+%\fnbelowfloat
+% to enable the placement of footnotes below bottom floats (the standard
+% LaTeX2e kernel puts them above bottom floats). This is an invasive package
+% which rewrites many portions of the LaTeX2e float routines. It may not work
+% with other packages that modify the LaTeX2e float routines. The latest
+% version and documentation can be obtained at:
+% http://www.ctan.org/pkg/stfloats
+% Do not use the stfloats baselinefloat ability as the IEEE does not allow
+% \baselineskip to stretch. Authors submitting work to the IEEE should note
+% that the IEEE rarely uses double column equations and that authors should try
+% to avoid such use. Do not be tempted to use the cuted.sty or midfloat.sty
+% packages (also by Sigitas Tolusis) as the IEEE does not format its papers in
+% such ways.
+% Do not attempt to use stfloats with fixltx2e as they are incompatible.
+% Instead, use Morten Hogholm'a dblfloatfix which combines the features
+% of both fixltx2e and stfloats:
+%
+% \usepackage{dblfloatfix}
+% The latest version can be found at:
+% http://www.ctan.org/pkg/dblfloatfix
+
+
+
+
+% *** PDF, URL AND HYPERLINK PACKAGES ***
+%
+%\usepackage{url}
+% url.sty was written by Donald Arseneau. It provides better support for
+% handling and breaking URLs. url.sty is already installed on most LaTeX
+% systems. The latest version and documentation can be obtained at:
+% http://www.ctan.org/pkg/url
+% Basically, \url{my_url_here}.
+
+
+
+
+% *** Do not adjust lengths that control margins, column widths, etc. ***
+% *** Do not use packages that alter fonts (such as pslatex).         ***
+% There should be no need to do such things with IEEEtran.cls V1.6 and later.
+% (Unless specifically asked to do so by the journal or conference you plan
+% to submit to, of course. )
+
+
+% correct bad hyphenation here
+\hyphenation{op-tical net-works semi-conduc-tor}
+
+
+\begin{document}
+%
+% paper title
+% Titles are generally capitalized except for words such as a, an, and, as,
+% at, but, by, for, in, nor, of, on, or, the, to and up, which are usually
+% not capitalized unless they are the first or last word of the title.
+% Linebreaks \\ can be used within to get better formatting as desired.
+% Do not put math or special symbols in the title.
+\title{Bare Demo of IEEEtran.cls\\ for IEEE Conferences}
+
+
+% author names and affiliations
+% use a multiple column layout for up to three different
+% affiliations
+\author{\IEEEauthorblockN{Michael Shell}
+\IEEEauthorblockA{School of Electrical and\\Computer Engineering\\
+Georgia Institute of Technology\\
+Atlanta, Georgia 30332--0250\\
+Email: http://www.michaelshell.org/contact.html}
+\and
+\IEEEauthorblockN{Homer Simpson}
+\IEEEauthorblockA{Twentieth Century Fox\\
+Springfield, USA\\
+Email: homer@thesimpsons.com}
+\and
+\IEEEauthorblockN{James Kirk\\ and Montgomery Scott}
+\IEEEauthorblockA{Starfleet Academy\\
+San Francisco, California 96678--2391\\
+Telephone: (800) 555--1212\\
+Fax: (888) 555--1212}}
+
+% conference papers do not typically use \thanks and this command
+% is locked out in conference mode. If really needed, such as for
+% the acknowledgment of grants, issue a \IEEEoverridecommandlockouts
+% after \documentclass
+
+% for over three affiliations, or if they all won't fit within the width
+% of the page, use this alternative format:
+% 
+%\author{\IEEEauthorblockN{Michael Shell\IEEEauthorrefmark{1},
+%Homer Simpson\IEEEauthorrefmark{2},
+%James Kirk\IEEEauthorrefmark{3}, 
+%Montgomery Scott\IEEEauthorrefmark{3} and
+%Eldon Tyrell\IEEEauthorrefmark{4}}
+%\IEEEauthorblockA{\IEEEauthorrefmark{1}School of Electrical and Computer Engineering\\
+%Georgia Institute of Technology,
+%Atlanta, Georgia 30332--0250\\ Email: see http://www.michaelshell.org/contact.html}
+%\IEEEauthorblockA{\IEEEauthorrefmark{2}Twentieth Century Fox, Springfield, USA\\
+%Email: homer@thesimpsons.com}
+%\IEEEauthorblockA{\IEEEauthorrefmark{3}Starfleet Academy, San Francisco, California 96678-2391\\
+%Telephone: (800) 555--1212, Fax: (888) 555--1212}
+%\IEEEauthorblockA{\IEEEauthorrefmark{4}Tyrell Inc., 123 Replicant Street, Los Angeles, California 90210--4321}}
+
+
+
+
+% use for special paper notices
+%\IEEEspecialpapernotice{(Invited Paper)}
+
+
+
+
+% make the title area
+\maketitle
+
+% As a general rule, do not put math, special symbols or citations
+% in the abstract
+\begin{abstract}
+The abstract goes here.
+\end{abstract}
+
+% no keywords
+
+
+
+
+% For peer review papers, you can put extra information on the cover
+% page as needed:
+% \ifCLASSOPTIONpeerreview
+% \begin{center} \bfseries EDICS Category: 3-BBND \end{center}
+% \fi
+%
+% For peerreview papers, this IEEEtran command inserts a page break and
+% creates the second title. It will be ignored for other modes.
+\IEEEpeerreviewmaketitle
+
+
+
+\section{Introduction}
+% no \IEEEPARstart
+This demo file is intended to serve as a ``starter file''
+for IEEE conference papers produced under \LaTeX\ using
+IEEEtran.cls version 1.8b and later.
+% You must have at least 2 lines in the paragraph with the drop letter
+% (should never be an issue)
+I wish you the best of success.
+
+\hfill mds
+ 
+\hfill August 26, 2015
+
+\subsection{Subsection Heading Here}
+Subsection text here.
+
+
+\subsubsection{Subsubsection Heading Here}
+Subsubsection text here.
+
+
+% An example of a floating figure using the graphicx package.
+% Note that \label must occur AFTER (or within) \caption.
+% For figures, \caption should occur after the \includegraphics.
+% Note that IEEEtran v1.7 and later has special internal code that
+% is designed to preserve the operation of \label within \caption
+% even when the captionsoff option is in effect. However, because
+% of issues like this, it may be the safest practice to put all your
+% \label just after \caption rather than within \caption{}.
+%
+% Reminder: the "draftcls" or "draftclsnofoot", not "draft", class
+% option should be used if it is desired that the figures are to be
+% displayed while in draft mode.
+%
+%\begin{figure}[!t]
+%\centering
+%\includegraphics[width=2.5in]{myfigure}
+% where an .eps filename suffix will be assumed under latex, 
+% and a .pdf suffix will be assumed for pdflatex; or what has been declared
+% via \DeclareGraphicsExtensions.
+%\caption{Simulation results for the network.}
+%\label{fig_sim}
+%\end{figure}
+
+% Note that the IEEE typically puts floats only at the top, even when this
+% results in a large percentage of a column being occupied by floats.
+
+
+% An example of a double column floating figure using two subfigures.
+% (The subfig.sty package must be loaded for this to work.)
+% The subfigure \label commands are set within each subfloat command,
+% and the \label for the overall figure must come after \caption.
+% \hfil is used as a separator to get equal spacing.
+% Watch out that the combined width of all the subfigures on a 
+% line do not exceed the text width or a line break will occur.
+%
+%\begin{figure*}[!t]
+%\centering
+%\subfloat[Case I]{\includegraphics[width=2.5in]{box}%
+%\label{fig_first_case}}
+%\hfil
+%\subfloat[Case II]{\includegraphics[width=2.5in]{box}%
+%\label{fig_second_case}}
+%\caption{Simulation results for the network.}
+%\label{fig_sim}
+%\end{figure*}
+%
+% Note that often IEEE papers with subfigures do not employ subfigure
+% captions (using the optional argument to \subfloat[]), but instead will
+% reference/describe all of them (a), (b), etc., within the main caption.
+% Be aware that for subfig.sty to generate the (a), (b), etc., subfigure
+% labels, the optional argument to \subfloat must be present. If a
+% subcaption is not desired, just leave its contents blank,
+% e.g., \subfloat[].
+
+
+% An example of a floating table. Note that, for IEEE style tables, the
+% \caption command should come BEFORE the table and, given that table
+% captions serve much like titles, are usually capitalized except for words
+% such as a, an, and, as, at, but, by, for, in, nor, of, on, or, the, to
+% and up, which are usually not capitalized unless they are the first or
+% last word of the caption. Table text will default to \footnotesize as
+% the IEEE normally uses this smaller font for tables.
+% The \label must come after \caption as always.
+%
+%\begin{table}[!t]
+%% increase table row spacing, adjust to taste
+%\renewcommand{\arraystretch}{1.3}
+% if using array.sty, it might be a good idea to tweak the value of
+% \extrarowheight as needed to properly center the text within the cells
+%\caption{An Example of a Table}
+%\label{table_example}
+%\centering
+%% Some packages, such as MDW tools, offer better commands for making tables
+%% than the plain LaTeX2e tabular which is used here.
+%\begin{tabular}{|c||c|}
+%\hline
+%One & Two\\
+%\hline
+%Three & Four\\
+%\hline
+%\end{tabular}
+%\end{table}
+
+
+% Note that the IEEE does not put floats in the very first column
+% - or typically anywhere on the first page for that matter. Also,
+% in-text middle ("here") positioning is typically not used, but it
+% is allowed and encouraged for Computer Society conferences (but
+% not Computer Society journals). Most IEEE journals/conferences use
+% top floats exclusively. 
+% Note that, LaTeX2e, unlike IEEE journals/conferences, places
+% footnotes above bottom floats. This can be corrected via the
+% \fnbelowfloat command of the stfloats package.
+
+
+
+
+\section{Conclusion}
+The conclusion goes here.
+
+
+
+
+% conference papers do not normally have an appendix
+
+
+% use section* for acknowledgment
+\section*{Acknowledgment}
+
+
+The authors would like to thank...
+
+
+
+
+
+% trigger a \newpage just before the given reference
+% number - used to balance the columns on the last page
+% adjust value as needed - may need to be readjusted if
+% the document is modified later
+%\IEEEtriggeratref{8}
+% The "triggered" command can be changed if desired:
+%\IEEEtriggercmd{\enlargethispage{-5in}}
+
+% references section
+
+% can use a bibliography generated by BibTeX as a .bbl file
+% BibTeX documentation can be easily obtained at:
+% http://mirror.ctan.org/biblio/bibtex/contrib/doc/
+% The IEEEtran BibTeX style support page is at:
+% http://www.michaelshell.org/tex/ieeetran/bibtex/
+%\bibliographystyle{IEEEtran}
+% argument is your BibTeX string definitions and bibliography database(s)
+%\bibliography{IEEEabrv,../bib/paper}
+%
+% <OR> manually copy in the resultant .bbl file
+% set second argument of \begin to the number of references
+% (used to reserve space for the reference number labels box)
+\begin{thebibliography}{1}
+
+\bibitem{IEEEhowto:kopka}
+H.~Kopka and P.~W. Daly, \emph{A Guide to \LaTeX}, 3rd~ed.\hskip 1em plus
+  0.5em minus 0.4em\relax Harlow, England: Addison-Wesley, 1999.
+
+\end{thebibliography}
+
+
+
+
+% that's all folks
+\end{document}
+
+