diff options
Diffstat (limited to '_xmsgs/ngdbuild.xmsgs')
| -rw-r--r-- | _xmsgs/ngdbuild.xmsgs | 1327 |
1 files changed, 1327 insertions, 0 deletions
diff --git a/_xmsgs/ngdbuild.xmsgs b/_xmsgs/ngdbuild.xmsgs new file mode 100644 index 0000000..29ca303 --- /dev/null +++ b/_xmsgs/ngdbuild.xmsgs @@ -0,0 +1,1327 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!-- IMPORTANT: This is an internal file that has been generated + by the Xilinx ISE software. Any direct editing or + changes made to this file may result in unpredictable + behavior or data corruption. It is strongly advised that + users do not edit the contents of this file. --> +<messages> +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET RX LOC="P101" |> [BPC3011-Papilio_Pro-general.ucf(30)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">RX</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET RX LOC="P101" |> [BPC3011-Papilio_Pro-general.ucf(30)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL |> [BPC3011-Papilio_Pro-general.ucf(30)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">RX</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><DRIVE=8 |> [BPC3011-Papilio_Pro-general.ucf(30)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">RX</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><SLEW=FAST;> [BPC3011-Papilio_Pro-general.ucf(30)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">RX</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET A(0) LOC="P48" |> [BPC3011-Papilio_Pro-general.ucf(32)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(0)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET A(0) LOC="P48" |> [BPC3011-Papilio_Pro-general.ucf(32)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(32)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(0)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET A(1) LOC="P51" |> [BPC3011-Papilio_Pro-general.ucf(33)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(1)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET A(1) LOC="P51" |> [BPC3011-Papilio_Pro-general.ucf(33)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(33)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(1)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET A(2) LOC="P56" |> [BPC3011-Papilio_Pro-general.ucf(34)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(2)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET A(2) LOC="P56" |> [BPC3011-Papilio_Pro-general.ucf(34)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(34)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(2)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET A(3) LOC="P58" |> [BPC3011-Papilio_Pro-general.ucf(35)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(3)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET A(3) LOC="P58" |> [BPC3011-Papilio_Pro-general.ucf(35)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(35)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(3)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET A(4) LOC="P61" |> [BPC3011-Papilio_Pro-general.ucf(36)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(4)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET A(4) LOC="P61" |> [BPC3011-Papilio_Pro-general.ucf(36)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(36)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(4)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET A(5) LOC="P66" |> [BPC3011-Papilio_Pro-general.ucf(37)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(5)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET A(5) LOC="P66" |> [BPC3011-Papilio_Pro-general.ucf(37)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(37)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(5)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET A(6) LOC="P67" |> [BPC3011-Papilio_Pro-general.ucf(38)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(6)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET A(6) LOC="P67" |> [BPC3011-Papilio_Pro-general.ucf(38)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(38)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(6)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET A(7) LOC="P75" |> [BPC3011-Papilio_Pro-general.ucf(39)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(7)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET A(7) LOC="P75" |> [BPC3011-Papilio_Pro-general.ucf(39)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(39)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(7)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET A(8) LOC="P79" |> [BPC3011-Papilio_Pro-general.ucf(40)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(8)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET A(8) LOC="P79" |> [BPC3011-Papilio_Pro-general.ucf(40)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(40)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(8)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET A(9) LOC="P81" |> [BPC3011-Papilio_Pro-general.ucf(41)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(9)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET A(9) LOC="P81" |> [BPC3011-Papilio_Pro-general.ucf(41)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(41)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(9)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET A(10) LOC="P83" |> [BPC3011-Papilio_Pro-general.ucf(42)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(10)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET A(10) LOC="P83" |> [BPC3011-Papilio_Pro-general.ucf(42)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(42)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(10)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET A(11) LOC="P85" |> [BPC3011-Papilio_Pro-general.ucf(43)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(11)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET A(11) LOC="P85" |> [BPC3011-Papilio_Pro-general.ucf(43)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(43)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(11)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET A(12) LOC="P88" |> [BPC3011-Papilio_Pro-general.ucf(44)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(12)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET A(12) LOC="P88" |> [BPC3011-Papilio_Pro-general.ucf(44)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(44)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(12)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET A(13) LOC="P93" |> [BPC3011-Papilio_Pro-general.ucf(45)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(13)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET A(13) LOC="P93" |> [BPC3011-Papilio_Pro-general.ucf(45)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(45)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(13)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET A(14) LOC="P98" |> [BPC3011-Papilio_Pro-general.ucf(46)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(14)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET A(14) LOC="P98" |> [BPC3011-Papilio_Pro-general.ucf(46)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(46)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(14)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET A(15) LOC="P100" |> [BPC3011-Papilio_Pro-general.ucf(47)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(15)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET A(15) LOC="P100" |> [BPC3011-Papilio_Pro-general.ucf(47)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(47)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">A(15)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET B(0) LOC="P99" |> [BPC3011-Papilio_Pro-general.ucf(48)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(0)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET B(0) LOC="P99" |> [BPC3011-Papilio_Pro-general.ucf(48)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(48)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(0)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET B(1) LOC="P97" |> [BPC3011-Papilio_Pro-general.ucf(49)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(1)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET B(1) LOC="P97" |> [BPC3011-Papilio_Pro-general.ucf(49)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(49)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(1)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET B(2) LOC="P92" |> [BPC3011-Papilio_Pro-general.ucf(50)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(2)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET B(2) LOC="P92" |> [BPC3011-Papilio_Pro-general.ucf(50)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(50)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(2)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET B(3) LOC="P87" |> [BPC3011-Papilio_Pro-general.ucf(51)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(3)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET B(3) LOC="P87" |> [BPC3011-Papilio_Pro-general.ucf(51)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(51)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(3)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET B(4) LOC="P84" |> [BPC3011-Papilio_Pro-general.ucf(52)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(4)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET B(4) LOC="P84" |> [BPC3011-Papilio_Pro-general.ucf(52)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(52)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(4)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET B(5) LOC="P82" |> [BPC3011-Papilio_Pro-general.ucf(53)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(5)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET B(5) LOC="P82" |> [BPC3011-Papilio_Pro-general.ucf(53)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(53)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(5)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET B(6) LOC="P80" |> [BPC3011-Papilio_Pro-general.ucf(54)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(6)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET B(6) LOC="P80" |> [BPC3011-Papilio_Pro-general.ucf(54)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(54)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(6)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET B(7) LOC="P78" |> [BPC3011-Papilio_Pro-general.ucf(55)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(7)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET B(7) LOC="P78" |> [BPC3011-Papilio_Pro-general.ucf(55)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(55)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(7)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET B(8) LOC="P74" |> [BPC3011-Papilio_Pro-general.ucf(56)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(8)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET B(8) LOC="P74" |> [BPC3011-Papilio_Pro-general.ucf(56)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(56)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(8)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET B(9) LOC="P95" |> [BPC3011-Papilio_Pro-general.ucf(57)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(9)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET B(9) LOC="P95" |> [BPC3011-Papilio_Pro-general.ucf(57)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(57)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(9)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET B(10) LOC="P62" |> [BPC3011-Papilio_Pro-general.ucf(58)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(10)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET B(10) LOC="P62" |> [BPC3011-Papilio_Pro-general.ucf(58)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(58)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(10)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET B(11) LOC="P59" |> [BPC3011-Papilio_Pro-general.ucf(59)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(11)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET B(11) LOC="P59" |> [BPC3011-Papilio_Pro-general.ucf(59)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(59)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(11)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET B(12) LOC="P57" |> [BPC3011-Papilio_Pro-general.ucf(60)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(12)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET B(12) LOC="P57" |> [BPC3011-Papilio_Pro-general.ucf(60)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(60)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(12)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET B(13) LOC="P55" |> [BPC3011-Papilio_Pro-general.ucf(61)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(13)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET B(13) LOC="P55" |> [BPC3011-Papilio_Pro-general.ucf(61)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(61)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(13)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET B(14) LOC="P50" |> [BPC3011-Papilio_Pro-general.ucf(62)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(14)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET B(14) LOC="P50" |> [BPC3011-Papilio_Pro-general.ucf(62)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(62)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(14)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET B(15) LOC="P47" |> [BPC3011-Papilio_Pro-general.ucf(63)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(15)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET B(15) LOC="P47" |> [BPC3011-Papilio_Pro-general.ucf(63)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(63)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">B(15)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET C(0) LOC="P114" |> [BPC3011-Papilio_Pro-general.ucf(64)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(0)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET C(0) LOC="P114" |> [BPC3011-Papilio_Pro-general.ucf(64)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(64)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(0)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET C(1) LOC="P115" |> [BPC3011-Papilio_Pro-general.ucf(65)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(1)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET C(1) LOC="P115" |> [BPC3011-Papilio_Pro-general.ucf(65)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(65)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(1)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET C(2) LOC="P116" |> [BPC3011-Papilio_Pro-general.ucf(66)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(2)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET C(2) LOC="P116" |> [BPC3011-Papilio_Pro-general.ucf(66)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(66)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(2)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET C(3) LOC="P117" |> [BPC3011-Papilio_Pro-general.ucf(67)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(3)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET C(3) LOC="P117" |> [BPC3011-Papilio_Pro-general.ucf(67)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(67)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(3)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET C(4) LOC="P118" |> [BPC3011-Papilio_Pro-general.ucf(68)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(4)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET C(4) LOC="P118" |> [BPC3011-Papilio_Pro-general.ucf(68)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(68)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(4)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET C(5) LOC="P119" |> [BPC3011-Papilio_Pro-general.ucf(69)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(5)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET C(5) LOC="P119" |> [BPC3011-Papilio_Pro-general.ucf(69)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(69)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(5)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET C(6) LOC="P120" |> [BPC3011-Papilio_Pro-general.ucf(70)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(6)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET C(6) LOC="P120" |> [BPC3011-Papilio_Pro-general.ucf(70)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(70)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(6)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET C(7) LOC="P121" |> [BPC3011-Papilio_Pro-general.ucf(71)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(7)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET C(7) LOC="P121" |> [BPC3011-Papilio_Pro-general.ucf(71)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(71)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(7)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET C(8) LOC="P123" |> [BPC3011-Papilio_Pro-general.ucf(72)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(8)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET C(8) LOC="P123" |> [BPC3011-Papilio_Pro-general.ucf(72)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(72)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(8)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET C(9) LOC="P124" |> [BPC3011-Papilio_Pro-general.ucf(73)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(9)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET C(9) LOC="P124" |> [BPC3011-Papilio_Pro-general.ucf(73)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(73)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(9)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET C(10) LOC="P126" |> [BPC3011-Papilio_Pro-general.ucf(74)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(10)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET C(10) LOC="P126" |> [BPC3011-Papilio_Pro-general.ucf(74)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(74)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(10)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET C(11) LOC="P127" |> [BPC3011-Papilio_Pro-general.ucf(75)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(11)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET C(11) LOC="P127" |> [BPC3011-Papilio_Pro-general.ucf(75)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(75)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(11)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET C(12) LOC="P131" |> [BPC3011-Papilio_Pro-general.ucf(76)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(12)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET C(12) LOC="P131" |> [BPC3011-Papilio_Pro-general.ucf(76)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(76)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(12)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET C(13) LOC="P132" |> [BPC3011-Papilio_Pro-general.ucf(77)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(13)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET C(13) LOC="P132" |> [BPC3011-Papilio_Pro-general.ucf(77)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(77)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(13)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET C(14) LOC="P133" |> [BPC3011-Papilio_Pro-general.ucf(78)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(14)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET C(14) LOC="P133" |> [BPC3011-Papilio_Pro-general.ucf(78)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(78)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(14)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET C(15) LOC="P134" |> [BPC3011-Papilio_Pro-general.ucf(79)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(15)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET C(15) LOC="P134" |> [BPC3011-Papilio_Pro-general.ucf(79)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(79)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">C(15)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_ADDR(0) LOC="P140" |> [BPC3011-Papilio_Pro-general.ucf(80)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(0)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_ADDR(0) LOC="P140" |> [BPC3011-Papilio_Pro-general.ucf(80)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(80)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(0)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_ADDR(1) LOC="P139" |> [BPC3011-Papilio_Pro-general.ucf(81)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(1)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_ADDR(1) LOC="P139" |> [BPC3011-Papilio_Pro-general.ucf(81)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(81)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(1)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_ADDR(2) LOC="P138" |> [BPC3011-Papilio_Pro-general.ucf(82)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(2)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_ADDR(2) LOC="P138" |> [BPC3011-Papilio_Pro-general.ucf(82)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(82)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(2)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_ADDR(3) LOC="P137" |> [BPC3011-Papilio_Pro-general.ucf(83)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(3)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_ADDR(3) LOC="P137" |> [BPC3011-Papilio_Pro-general.ucf(83)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(83)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(3)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_ADDR(4) LOC="P46" |> [BPC3011-Papilio_Pro-general.ucf(84)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(4)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_ADDR(4) LOC="P46" |> [BPC3011-Papilio_Pro-general.ucf(84)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(84)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(4)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_ADDR(5) LOC="P45" |> [BPC3011-Papilio_Pro-general.ucf(85)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(5)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_ADDR(5) LOC="P45" |> [BPC3011-Papilio_Pro-general.ucf(85)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(85)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(5)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_ADDR(6) LOC="P44" |> [BPC3011-Papilio_Pro-general.ucf(86)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(6)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_ADDR(6) LOC="P44" |> [BPC3011-Papilio_Pro-general.ucf(86)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(86)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(6)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_ADDR(7) LOC="P43" |> [BPC3011-Papilio_Pro-general.ucf(87)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(7)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_ADDR(7) LOC="P43" |> [BPC3011-Papilio_Pro-general.ucf(87)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(87)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(7)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_ADDR(8) LOC="P41" |> [BPC3011-Papilio_Pro-general.ucf(88)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(8)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_ADDR(8) LOC="P41" |> [BPC3011-Papilio_Pro-general.ucf(88)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(88)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(8)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_ADDR(9) LOC="P40" |> [BPC3011-Papilio_Pro-general.ucf(89)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(9)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_ADDR(9) LOC="P40" |> [BPC3011-Papilio_Pro-general.ucf(89)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(89)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(9)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_ADDR(10) LOC="P141" |> [BPC3011-Papilio_Pro-general.ucf(90)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(10)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_ADDR(10) LOC="P141" |> [BPC3011-Papilio_Pro-general.ucf(90)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(90)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(10)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_ADDR(11) LOC="P35" |> [BPC3011-Papilio_Pro-general.ucf(91)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(11)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_ADDR(11) LOC="P35" |> [BPC3011-Papilio_Pro-general.ucf(91)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(91)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(11)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_ADDR(12) LOC="P34" |> [BPC3011-Papilio_Pro-general.ucf(92)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(12)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_ADDR(12) LOC="P34" |> [BPC3011-Papilio_Pro-general.ucf(92)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(92)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_ADDR(12)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_DATA(0) LOC="P9" |> [BPC3011-Papilio_Pro-general.ucf(93)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(0)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_DATA(0) LOC="P9" |> [BPC3011-Papilio_Pro-general.ucf(93)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(93)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(0)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_DATA(1) LOC="P10" |> [BPC3011-Papilio_Pro-general.ucf(94)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(1)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_DATA(1) LOC="P10" |> [BPC3011-Papilio_Pro-general.ucf(94)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(94)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(1)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_DATA(2) LOC="P11" |> [BPC3011-Papilio_Pro-general.ucf(95)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(2)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_DATA(2) LOC="P11" |> [BPC3011-Papilio_Pro-general.ucf(95)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(95)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(2)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_DATA(3) LOC="P12" |> [BPC3011-Papilio_Pro-general.ucf(96)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(3)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_DATA(3) LOC="P12" |> [BPC3011-Papilio_Pro-general.ucf(96)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(96)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(3)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_DATA(4) LOC="P14" |> [BPC3011-Papilio_Pro-general.ucf(97)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(4)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_DATA(4) LOC="P14" |> [BPC3011-Papilio_Pro-general.ucf(97)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(97)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(4)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_DATA(5) LOC="P15" |> [BPC3011-Papilio_Pro-general.ucf(98)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(5)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_DATA(5) LOC="P15" |> [BPC3011-Papilio_Pro-general.ucf(98)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(98)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(5)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_DATA(6) LOC="P16" |> [BPC3011-Papilio_Pro-general.ucf(99)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(6)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_DATA(6) LOC="P16" |> [BPC3011-Papilio_Pro-general.ucf(99)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(99)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(6)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_DATA(7) LOC="P8" |> [BPC3011-Papilio_Pro-general.ucf(100)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(7)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_DATA(7) LOC="P8" |> [BPC3011-Papilio_Pro-general.ucf(100)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(100)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(7)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_DATA(8) LOC="P21" |> [BPC3011-Papilio_Pro-general.ucf(101)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(8)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_DATA(8) LOC="P21" |> [BPC3011-Papilio_Pro-general.ucf(101)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(101)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(8)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_DATA(9) LOC="P22" |> [BPC3011-Papilio_Pro-general.ucf(102)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(9)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_DATA(9) LOC="P22" |> [BPC3011-Papilio_Pro-general.ucf(102)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(102)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(9)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_DATA(10) LOC="P23" |> [BPC3011-Papilio_Pro-general.ucf(103)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(10)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_DATA(10) LOC="P23" |> [BPC3011-Papilio_Pro-general.ucf(103)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(103)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(10)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_DATA(11) LOC="P24" |> [BPC3011-Papilio_Pro-general.ucf(104)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(11)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_DATA(11) LOC="P24" |> [BPC3011-Papilio_Pro-general.ucf(104)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(104)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(11)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_DATA(12) LOC="P26" |> [BPC3011-Papilio_Pro-general.ucf(105)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(12)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_DATA(12) LOC="P26" |> [BPC3011-Papilio_Pro-general.ucf(105)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(105)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(12)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_DATA(13) LOC="P27" |> [BPC3011-Papilio_Pro-general.ucf(106)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(13)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_DATA(13) LOC="P27" |> [BPC3011-Papilio_Pro-general.ucf(106)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(106)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(13)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_DATA(14) LOC="P29" |> [BPC3011-Papilio_Pro-general.ucf(107)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(14)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_DATA(14) LOC="P29" |> [BPC3011-Papilio_Pro-general.ucf(107)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(107)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(14)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_DATA(15) LOC="P30" |> [BPC3011-Papilio_Pro-general.ucf(108)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(15)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_DATA(15) LOC="P30" |> [BPC3011-Papilio_Pro-general.ucf(108)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(108)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DATA(15)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_DQML LOC="P7" |> [BPC3011-Papilio_Pro-general.ucf(109)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DQML</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_DQML LOC="P7" |> [BPC3011-Papilio_Pro-general.ucf(109)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(109)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DQML</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_DQMH LOC="P17" |> [BPC3011-Papilio_Pro-general.ucf(110)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DQMH</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_DQMH LOC="P17" |> [BPC3011-Papilio_Pro-general.ucf(110)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(110)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_DQMH</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_BA(0) LOC="P143" |> [BPC3011-Papilio_Pro-general.ucf(111)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_BA(0)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_BA(0) LOC="P143" |> [BPC3011-Papilio_Pro-general.ucf(111)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(111)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_BA(0)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_BA(1) LOC="P142" |> [BPC3011-Papilio_Pro-general.ucf(112)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_BA(1)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_BA(1) LOC="P142" |> [BPC3011-Papilio_Pro-general.ucf(112)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(112)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_BA(1)</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_nWE LOC="P6" |> [BPC3011-Papilio_Pro-general.ucf(113)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_nWE</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_nWE LOC="P6" |> [BPC3011-Papilio_Pro-general.ucf(113)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(113)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_nWE</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_nCAS LOC="P5" |> [BPC3011-Papilio_Pro-general.ucf(114)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_nCAS</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_nCAS LOC="P5" |> [BPC3011-Papilio_Pro-general.ucf(114)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(114)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_nCAS</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_nRAS LOC="P2" |> [BPC3011-Papilio_Pro-general.ucf(115)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_nRAS</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_nRAS LOC="P2" |> [BPC3011-Papilio_Pro-general.ucf(115)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(115)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_nRAS</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_CS LOC="P1" |> [BPC3011-Papilio_Pro-general.ucf(116)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_CS</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_CS LOC="P1" |> [BPC3011-Papilio_Pro-general.ucf(116)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(116)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_CS</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_CLK LOC="P32" |> [BPC3011-Papilio_Pro-general.ucf(117)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_CLK</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_CLK LOC="P32" |> [BPC3011-Papilio_Pro-general.ucf(117)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(117)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_CLK</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET SDRAM_CKE LOC="P33" |> [BPC3011-Papilio_Pro-general.ucf(118)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_CKE</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET SDRAM_CKE LOC="P33" |> [BPC3011-Papilio_Pro-general.ucf(118)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL;> [BPC3011-Papilio_Pro-general.ucf(118)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">SDRAM_CKE</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET JTAG_TMS LOC="P107" |> [BPC3011-Papilio_Pro-general.ucf(120)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">JTAG_TMS</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET JTAG_TMS LOC="P107" |> [BPC3011-Papilio_Pro-general.ucf(120)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL |> [BPC3011-Papilio_Pro-general.ucf(120)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">JTAG_TMS</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><DRIVE=8 |> [BPC3011-Papilio_Pro-general.ucf(120)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">JTAG_TMS</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><SLEW=FAST;> [BPC3011-Papilio_Pro-general.ucf(120)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">JTAG_TMS</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET JTAG_TCK LOC="P109" |> [BPC3011-Papilio_Pro-general.ucf(121)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">JTAG_TCK</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET JTAG_TCK LOC="P109" |> [BPC3011-Papilio_Pro-general.ucf(121)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL |> [BPC3011-Papilio_Pro-general.ucf(121)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">JTAG_TCK</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><DRIVE=8 |> [BPC3011-Papilio_Pro-general.ucf(121)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">JTAG_TCK</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><SLEW=FAST;> [BPC3011-Papilio_Pro-general.ucf(121)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">JTAG_TCK</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET JTAG_TDI LOC="P110" |> [BPC3011-Papilio_Pro-general.ucf(122)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">JTAG_TDI</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET JTAG_TDI LOC="P110" |> [BPC3011-Papilio_Pro-general.ucf(122)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL |> [BPC3011-Papilio_Pro-general.ucf(122)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">JTAG_TDI</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><DRIVE=8 |> [BPC3011-Papilio_Pro-general.ucf(122)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">JTAG_TDI</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><SLEW=FAST;> [BPC3011-Papilio_Pro-general.ucf(122)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">JTAG_TDI</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET JTAG_TDO LOC="P106" |> [BPC3011-Papilio_Pro-general.ucf(123)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">JTAG_TDO</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET JTAG_TDO LOC="P106" |> [BPC3011-Papilio_Pro-general.ucf(123)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL |> [BPC3011-Papilio_Pro-general.ucf(123)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">JTAG_TDO</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><DRIVE=8 |> [BPC3011-Papilio_Pro-general.ucf(123)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">JTAG_TDO</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><SLEW=FAST;> [BPC3011-Papilio_Pro-general.ucf(123)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">JTAG_TDO</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET FLASH_CS LOC="P38" |> [BPC3011-Papilio_Pro-general.ucf(124)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">FLASH_CS</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET FLASH_CS LOC="P38" |> [BPC3011-Papilio_Pro-general.ucf(124)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL |> [BPC3011-Papilio_Pro-general.ucf(124)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">FLASH_CS</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><DRIVE=8 |> [BPC3011-Papilio_Pro-general.ucf(124)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">FLASH_CS</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><SLEW=FAST;> [BPC3011-Papilio_Pro-general.ucf(124)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">FLASH_CS</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET FLASH_CK LOC="P70" |> [BPC3011-Papilio_Pro-general.ucf(125)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">FLASH_CK</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET FLASH_CK LOC="P70" |> [BPC3011-Papilio_Pro-general.ucf(125)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL |> [BPC3011-Papilio_Pro-general.ucf(125)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">FLASH_CK</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><DRIVE=8 |> [BPC3011-Papilio_Pro-general.ucf(125)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">FLASH_CK</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><SLEW=FAST;> [BPC3011-Papilio_Pro-general.ucf(125)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">FLASH_CK</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><NET FLASH_SI LOC="P64" |> [BPC3011-Papilio_Pro-general.ucf(126)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">FLASH_SI</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="warning" file="ConstraintSystem" num="0" >A target design object for the Locate constraint '<NET FLASH_SI LOC="P64" |> [BPC3011-Papilio_Pro-general.ucf(126)]' could not be found and so the Locate constraint will be removed. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><IOSTANDARD=LVTTL |> [BPC3011-Papilio_Pro-general.ucf(126)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">FLASH_SI</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><DRIVE=8 |> [BPC3011-Papilio_Pro-general.ucf(126)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">FLASH_SI</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="59" delta="old" >Constraint <arg fmt="%s" index="1"><SLEW=FAST;> [BPC3011-Papilio_Pro-general.ucf(126)]</arg>: <arg fmt="%s" index="2">NET</arg> "<arg fmt="%s" index="3">FLASH_SI</arg>" not found. Please verify that: +1. The specified design element actually exists in the original design. +2. The specified object is spelled correctly in the constraint source file. +</msg> + +<msg type="info" file="ConstraintSystem" num="0" >The Period constraint <PERIOD=31.25ns;> [BPC3011-Papilio_Pro-general.ucf(29)], is specified using the Net Period method which is not recommended. Please use the Timespec PERIOD method. +</msg> + +</messages> + |