diff options
Diffstat (limited to 'stopwatch/db/stopwatch.fit.qmsg')
| -rw-r--r-- | stopwatch/db/stopwatch.fit.qmsg | 44 |
1 files changed, 44 insertions, 0 deletions
diff --git a/stopwatch/db/stopwatch.fit.qmsg b/stopwatch/db/stopwatch.fit.qmsg new file mode 100644 index 0000000..e4d935d --- /dev/null +++ b/stopwatch/db/stopwatch.fit.qmsg @@ -0,0 +1,44 @@ +{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS_MORE_LOGICAL" "4 4 8 " "Parallel Compilation has detected 8 hyper-threaded processors. However, the extra hyper-threaded processors will not be used by default. Parallel Compilation will use 4 of the 4 physical processors detected instead." { } { } 0 11104 "Parallel Compilation has detected %3!i! hyper-threaded processors. However, the extra hyper-threaded processors will not be used by default. Parallel Compilation will use %1!i! of the %2!i! physical processors detected instead." 0 0 "Fitter" 0 -1 1456504666492 ""} +{ "Info" "IMPP_MPP_USER_DEVICE" "stopwatch EP3C16F484C6 " "Selected device EP3C16F484C6 for design \"stopwatch\"" { } { } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1456504666717 ""} +{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Core supply voltage 1.2V " "Core supply voltage is 1.2V" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1456504666762 ""} +{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1456504666762 ""} +{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1456504666762 ""} +{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" { } { } 0 171003 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "Fitter" 0 -1 1456504666833 ""} +{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP3C40F484C6 " "Device EP3C40F484C6 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Quartus II" 0 -1 1456504667022 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP3C55F484C6 " "Device EP3C55F484C6 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Quartus II" 0 -1 1456504667022 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP3C80F484C6 " "Device EP3C80F484C6 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Quartus II" 0 -1 1456504667022 ""} } { } 2 176444 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "Fitter" 0 -1 1456504667022 ""} +{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "5 " "Fitter converted 5 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_ASDO_DATA1~ D1 " "Pin ~ALTERA_ASDO_DATA1~ is reserved at location D1" { } { { "c:/altera/13.0sp1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/altera/13.0sp1/quartus/bin64/pin_planner.ppl" { ~ALTERA_ASDO_DATA1~ } } } { "c:/altera/13.0sp1/quartus/bin64/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/13.0sp1/quartus/bin64/TimingClosureFloorplan.fld" "" "" { ~ALTERA_ASDO_DATA1~ } "NODE_NAME" } } { "temporary_test_loc" "" { Generic "C:/Git/stopwatch/" { { 0 { 0 ""} 0 298 9224 9983 0} } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Quartus II" 0 -1 1456504667024 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_FLASH_nCE_nCSO~ E2 " "Pin ~ALTERA_FLASH_nCE_nCSO~ is reserved at location E2" { } { { "c:/altera/13.0sp1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/altera/13.0sp1/quartus/bin64/pin_planner.ppl" { ~ALTERA_FLASH_nCE_nCSO~ } } } { "c:/altera/13.0sp1/quartus/bin64/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/13.0sp1/quartus/bin64/TimingClosureFloorplan.fld" "" "" { ~ALTERA_FLASH_nCE_nCSO~ } "NODE_NAME" } } { "temporary_test_loc" "" { Generic "C:/Git/stopwatch/" { { 0 { 0 ""} 0 300 9224 9983 0} } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Quartus II" 0 -1 1456504667024 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_DCLK~ K2 " "Pin ~ALTERA_DCLK~ is reserved at location K2" { } { { "c:/altera/13.0sp1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/altera/13.0sp1/quartus/bin64/pin_planner.ppl" { ~ALTERA_DCLK~ } } } { "c:/altera/13.0sp1/quartus/bin64/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/13.0sp1/quartus/bin64/TimingClosureFloorplan.fld" "" "" { ~ALTERA_DCLK~ } "NODE_NAME" } } { "temporary_test_loc" "" { Generic "C:/Git/stopwatch/" { { 0 { 0 ""} 0 302 9224 9983 0} } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Quartus II" 0 -1 1456504667024 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_DATA0~ K1 " "Pin ~ALTERA_DATA0~ is reserved at location K1" { } { { "c:/altera/13.0sp1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/altera/13.0sp1/quartus/bin64/pin_planner.ppl" { ~ALTERA_DATA0~ } } } { "c:/altera/13.0sp1/quartus/bin64/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/13.0sp1/quartus/bin64/TimingClosureFloorplan.fld" "" "" { ~ALTERA_DATA0~ } "NODE_NAME" } } { "temporary_test_loc" "" { Generic "C:/Git/stopwatch/" { { 0 { 0 ""} 0 304 9224 9983 0} } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Quartus II" 0 -1 1456504667024 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nCEO~ K22 " "Pin ~ALTERA_nCEO~ is reserved at location K22" { } { { "c:/altera/13.0sp1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/altera/13.0sp1/quartus/bin64/pin_planner.ppl" { ~ALTERA_nCEO~ } } } { "c:/altera/13.0sp1/quartus/bin64/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/13.0sp1/quartus/bin64/TimingClosureFloorplan.fld" "" "" { ~ALTERA_nCEO~ } "NODE_NAME" } } { "temporary_test_loc" "" { Generic "C:/Git/stopwatch/" { { 0 { 0 ""} 0 306 9224 9983 0} } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Quartus II" 0 -1 1456504667024 ""} } { } 0 169124 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0 "Fitter" 0 -1 1456504667024 ""} +{ "Warning" "WCUT_CUT_ATOM_PINS_WITH_INCOMPLETE_IO_ASSIGNMENTS" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" { } { } 0 15714 "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" 0 0 "Fitter" 0 -1 1456504667025 ""} +{ "Warning" "WTDB_ANALYZE_COMB_LATCHES" "17 " "TimeQuest Timing Analyzer is analyzing 17 combinational loops as latches." { } { } 0 335093 "TimeQuest Timing Analyzer is analyzing %1!d! combinational loops as latches." 0 0 "Fitter" 0 -1 1456504667866 ""} +{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "stopwatch.sdc " "Synopsys Design Constraints File file not found: 'stopwatch.sdc'. A Synopsys Design Constraints File is required by the TimeQuest Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the TimeQuest Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1456504667866 ""} +{ "Info" "ISTA_NO_CLOCK_FOUND_NO_DERIVING_MSG" "base clocks " "No user constrained base clocks found in the design" { } { } 0 332144 "No user constrained %1!s! found in the design" 0 0 "Fitter" 0 -1 1456504667866 ""} +{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Fitter" 0 -1 1456504667868 ""} +{ "Info" "ISTA_DERIVE_CLOCK_UNCERTAINTY_INFO" "Deriving Clock Uncertainty. Please refer to report_sdc in TimeQuest to see clock uncertainties. " "Deriving Clock Uncertainty. Please refer to report_sdc in TimeQuest to see clock uncertainties." { } { } 0 332123 "%1!s!" 0 0 "Fitter" 0 -1 1456504667869 ""} +{ "Info" "ISTA_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." { } { } 0 332130 "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." 0 0 "Fitter" 0 -1 1456504667869 ""} +{ "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL" "ten_counter:inst6\|inst23 " "Automatically promoted node ten_counter:inst6\|inst23 " { { "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL_FANOUTS" "destinations Global Clock " "Automatically promoted destinations to use location or clock signal Global Clock" { } { } 0 176355 "Automatically promoted %1!s! to use location or clock signal %2!s!" 0 0 "Quartus II" 0 -1 1456504667877 ""} } { { "../ten_counter/ten_counter.bdf" "" { Schematic "C:/Git/ten_counter/ten_counter.bdf" { { 360 1088 1152 440 "inst23" "" } } } } { "c:/altera/13.0sp1/quartus/bin64/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/13.0sp1/quartus/bin64/TimingClosureFloorplan.fld" "" "" { ten_counter:inst6|inst23 } "NODE_NAME" } } { "temporary_test_loc" "" { Generic "C:/Git/stopwatch/" { { 0 { 0 ""} 0 136 9224 9983 0} } } } } 0 176353 "Automatically promoted node %1!s! %2!s!" 0 0 "Fitter" 0 -1 1456504667877 ""} +{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Starting register packing" { } { } 0 176233 "Starting register packing" 0 0 "Fitter" 0 -1 1456504668015 ""} +{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Performing register packing on registers with non-logic cell location assignments" { } { } 1 176273 "Performing register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1456504668015 ""} +{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Completed register packing on registers with non-logic cell location assignments" { } { } 1 176274 "Completed register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1456504668015 ""} +{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Started Fast Input/Output/OE register processing" { } { } 1 176236 "Started Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1456504668016 ""} +{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Finished Fast Input/Output/OE register processing" { } { } 1 176237 "Finished Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1456504668016 ""} +{ "Extra Info" "IFSAC_FSAC_START_MAC_SCAN_CHAIN_INFERENCING" "" "Start inferring scan chains for DSP blocks" { } { } 1 176238 "Start inferring scan chains for DSP blocks" 1 0 "Fitter" 0 -1 1456504668016 ""} +{ "Extra Info" "IFSAC_FSAC_FINISH_MAC_SCAN_CHAIN_INFERENCING" "" "Inferring scan chains for DSP blocks is complete" { } { } 1 176239 "Inferring scan chains for DSP blocks is complete" 1 0 "Fitter" 0 -1 1456504668016 ""} +{ "Extra Info" "IFSAC_FSAC_START_IO_MULT_RAM_PACKING" "" "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" { } { } 1 176248 "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" 1 0 "Fitter" 0 -1 1456504668016 ""} +{ "Extra Info" "IFSAC_FSAC_FINISH_IO_MULT_RAM_PACKING" "" "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" { } { } 1 176249 "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" 1 0 "Fitter" 0 -1 1456504668017 ""} +{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "No registers were packed into other blocks" { } { } 1 176219 "No registers were packed into other blocks" 0 0 "Quartus II" 0 -1 1456504668017 ""} } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1456504668017 ""} +{ "Info" "IFITCC_FITTER_PREPARATION_END" "00:00:01 " "Fitter preparation operations ending: elapsed time is 00:00:01" { } { } 0 171121 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1456504668037 ""} +{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" { } { } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1456504668522 ""} +{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Fitter placement preparation operations ending: elapsed time is 00:00:00" { } { } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1456504668589 ""} +{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" { } { } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1456504668596 ""} +{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" { } { } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1456504668944 ""} +{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Fitter placement operations ending: elapsed time is 00:00:00" { } { } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1456504668944 ""} +{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" { } { } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1456504669124 ""} +{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Router estimated average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "1 X21_Y20 X30_Y29 " "Router estimated peak interconnect usage is 1% of the available device resources in the region that extends from location X21_Y20 to location X30_Y29" { } { { "loc" "" { Generic "C:/Git/stopwatch/" { { 1 { 0 "Router estimated peak interconnect usage is 1% of the available device resources in the region that extends from location X21_Y20 to location X30_Y29"} { { 11 { 0 "Router estimated peak interconnect usage is 1% of the available device resources in the region that extends from location X21_Y20 to location X30_Y29"} 21 20 10 10 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Quartus II" 0 -1 1456504669622 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1456504669622 ""} +{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:01 " "Fitter routing operations ending: elapsed time is 00:00:01" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1456504670790 ""} +{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Optimizations that may affect the design's routability were skipped" { } { } 0 170201 "Optimizations that may affect the design's routability were skipped" 0 0 "Quartus II" 0 -1 1456504670792 ""} } { } 0 170199 "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." 0 0 "Fitter" 0 -1 1456504670792 ""} +{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "0.36 " "Total time spent on timing analysis during the Fitter is 0.36 seconds." { } { } 0 11888 "Total time spent on timing analysis during the Fitter is %1!s! seconds." 0 0 "Fitter" 0 -1 1456504670800 ""} +{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1456504670829 ""} +{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1456504671066 ""} +{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1456504671093 ""} +{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1456504671182 ""} +{ "Info" "IFITCC_FITTER_POST_OPERATION_END" "00:00:01 " "Fitter post-fit operations ending: elapsed time is 00:00:01" { } { } 0 11218 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1456504671688 ""} +{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "C:/Git/stopwatch/output_files/stopwatch.fit.smsg " "Generated suppressed messages file C:/Git/stopwatch/output_files/stopwatch.fit.smsg" { } { } 0 144001 "Generated suppressed messages file %1!s!" 0 0 "Fitter" 0 -1 1456504672391 ""} +{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 3 s Quartus II 64-Bit " "Quartus II 64-Bit Fitter was successful. 0 errors, 3 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "1094 " "Peak virtual memory: 1094 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Quartus II" 0 -1 1456504672570 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Feb 26 16:37:52 2016 " "Processing ended: Fri Feb 26 16:37:52 2016" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Quartus II" 0 -1 1456504672570 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:07 " "Elapsed time: 00:00:07" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Quartus II" 0 -1 1456504672570 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:07 " "Total CPU time (on all processors): 00:00:07" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Quartus II" 0 -1 1456504672570 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1456504672570 ""} |